Reviews
Heavy-duty Slotted screwdriver
Purchased to loosen a hard Minus head Bolt.
Tip Tough
Grip section Tough
Grip is rugged and slippery.
The Bolt head is firmly in place because of the
The hard Bolt loosened immediately.
View detail
Getting ready for my first DIY Plug replacement in about 30 years (Part 2).
In order to convert from the BriskPlug to the DENSO, I arranged the size of the JAPANPlug for the JAPANMotorcycle with the JAPAN tools, so there should be no problem. View detail
I'm ready for my first DIY Plug replacement in about 30 years.
When I was a student, I used to replace the Spark plug myself, but after I started working, I had the shop replace the Spark plug when they inspected my car.
I've been thinking about it for a while now, so I decided to replace it myself, but since it's the first time in 30 years that I've done it myself, I bought a reliable tool to avoid trouble.
Especially, since there seemed to be the one that Screw precision was bad for the B-RiskPlug being installed...I really want to avoid Trouble at the time of removal.
The Magnet holds the Plug firmly in place and I was able to work reliably.
View detail
21mm is
I bought this for the Oil FilterCoupler in my car.
It was too narrow to turn the Ratchet, so now it's easier to work with!
View detail
It's handy to have!
You may not be able to work without the Extension bar in some work areas!
There are various sizes of lineups, so let's prepare what you need.
View detail
You should buy this!!!
Whoever thought of this tool is a genius.
There's a lot of different Ideas tools out there, but I think this one's a good one to have!
View detail
For Torque management!
Very useful for Torque management!
I also own an Analog Torque wrench, but I use it in different scenes.
I think they'd be very handy to have!
View detail
You'll be working more efficiently!
If the Bolt etc. comes loose, this will turn it round and round!
It's a Recommendation because it makes the work more efficient...
View detail
It's a DIY must!
I've been working on this one for quite a while!
It's made by KTC, so you can be sure the thing will work!
It's pretty much Recommendation's tool.
View detail
You'll be working more efficiently!
It is useful to install the spring in the Exhaust System replacement etc.!
It will also lead to an increase in work efficiency.
If you're a DIYer, I think it's worth having!
View detail
First Digital ratchet
I've been using a cheap Torque wrench from Home center.
I had the opportunity to remove the Bolt from the Clutch cover and Dynamo cover, so I purchased a good and accurate one at this time.
Compared to the Mechanical, it is easier to set up and you can see how much torque is being applied.
It is important to note that this unit has a Torque measurement range of 12 to 60 N・m.
Pre-setting can be done from 6N-m. Up to 12N-m is a reference value, but it is several times better than tightening with Torque, which is uneven, etc. by hand torque wrench, isn't it?
Of course, it would be most ideal if we could have both GEK030-C3A and GEK085-R3! (; ´∀))
I think this one is enough for DIY maintenance.
View detail
That's KTC!
It's an essential Tool in Motorcycle!
The accuracy is so good that you'd think it was made by KTC!
View detail
The Wrench that comes with it is excellent!
I bought this to fill my brake fluid for a DIY brake hose change, and it comes with everything I need to change brake fluid. I bought it to fill the brake fluid. The large wrench is convenient for loosening and tightening the Breeder. The hose of the syringe was a little thick for Harley's Breeder, so I added a thin hose separately and used it. View detail
KTC for peace of mind
A must have when it comes to DIY Oil changes!
The 64 in the photo is a Kawasaki Z900
66.5 is SEA BASSGSX-R1000R
I use it in!!!
View detail
Easy to work with Magnet
It is a general with Magnet's Plug wrench.
I noticed after I bought it that it was a rare 12 square Type.
Naturally, you can also turn the regular hex Spark plug.
Plug wrench is necessary because Plug falls in a normal Deep socket.
This Wrench is thinner walled than a typical Socket, making it easier to work in tight Plug holes.
View detail
To remove the Tank Cover of MT-07
[How is it used?
It is mainly used for car maintenance, and for motorcycle, it is very useful to remove the tank cover of MT-07.
How was your experience with it?
This slim Type is just right for removing Tank Cover of MT-07.
How did it compare to other products?
Unlike the cheap ones, they don't break.
According to the official site, it is a resin with Fiber, or maybe Glass fiber.
There is a sense of security when working.
In return, the Gold amount is higher.
View detail
Even so, Pliers is Pliers
Compared to the no-name product, it is easier to grip and apply force, so you can FirmlyHold it.
It seems to have good engagement accuracy, no wobble, and no slippage.
View detail
One of these will change your destiny.
When you remove the exhaust pipe whether it is there or not.
It determines whether Radiator should be shifted or not…
This is also useful for something if you keep it on hand.
View detail
Ratchet combination for full tightening
It is useful for loosening Nut etc. of Exhaust SystemReverse side.
It's thin, so it doesn't get in the way, doesn't hit you, and is easy to use.
The best thing about it is that it is strong enough to be tightened as it is.
View detail
I thought the cheap ones would suffice.
I was using another cheap Tool, but compared to this one...
The notch is light and has little play, making it easy to tighten in tight spaces.
The Push button on the Socket doesn't stick out, so it doesn't get in the way.
This is the only thing that makes a difference, but it makes a huge difference in workability.
View detail