Reviews
CBR1000RR-R uses this
The Rear Axle Nut of the CBR1000RR-R is 36mm in diameter.
The tightening torque is also high, and a box with many angles was used, but it seemed to come off, so we changed to a 36mm hexagonal box.
At the same time, I also purchased a pure STD Nut with it. I think I was able to buy peace of mind at a reasonable price with FirmlyFit. I think I was able to take countermeasures before I got injured, although I am satisfied with myself.
View detail
This eliminates the need to search for tools.
Rose and kept it in my toolbox. Separate from the tools for my main job,
It is stored in the Motorcycle garage. I use it by hooking it to the Neodymium Hook as shown in the picture, considering that it is easy to understand and within easy reach.
View detail
Is the length of the short method better?
I tried to make a 15-socket holder, but I didn't think about the length of the holder. I didn't think about the length of the holder, because it was about 30cm long, so I couldn't fit it in my tool box. 10-socket holders are available in the Quantity:2pc. I should have bought Set. But
It is definitely better than the Gold genus because it is made of plastic.
View detail
Poor mechanics buy toolsRose
9.The 5 tools were added in the Grip set since the number of tools has increased since the Rose purchase. The work is easy Plus No.2 Driver.
Only 1 pc.
View detail
KTC after all
This is for the Axle Nut of the Rear. I bought this hexagonal one instead of the 12-square one because the torque is applied to a certain extent, and the price is cheap and KTC quality is reliable.
For practical purposes, this is.
View detail
Resin Holder for easy insertion and removal of Socket
This Material is definitely better than Gold:PlasticHolder is easy to use.
Material:The Piece of Plastic Holder is stuck on two Gold rods, and the Material such as Shibuichi, 3/8, 1/2, etc.:It can be used to replace PlasticHolderPiece.
Gold genus products tend to loosen and ruin rather quickly once you start using them. This Holder is easy to insert and remove, and I definitely recommend it.
View detail
"Japan" It's a one-of-a-kind Tools Set!
I think it is a tool set for personal level and can be used not only for motorcycle but also for bicycle maintenance.
Except for heavy maintenance, this one (and a few more) will do the job.
The quality is unquestionable, just like in Japan! I think you will not lose anything by buying it!
View detail
The Socket that never misses
First of all, you can't go wrong with a Socket, and I think KTC is just right for motorcycle tinkering. It is a good product with accuracy and strength. View detail
The Larger the Size, the better the accuracy!
I buy KTC for large sized sockets. The price is cheap and the accuracy is good, so it helps me a lot. View detail
Strong!
I don't use Joint very often, but it is a product I worry about if I don't have it.
It is a product of strength, precision and no mistake.
View detail
Adapter with precision!
Adapter of KTC [1/2→3/8] is accurate and just right to pull out and insert. I can use it for years and it is durable. View detail
Precision Adapter
Adapter of KTC [3/8→1/2] has been in use for years and is durable.
It's also good for extraction and accuracy.
Highly recommended!
View detail
Some weight reduction
Purchased for Socket expansion.
Neither possible nor impossible.
The Gold model has been replaced or somewhat lightened.
View detail
Required for certain locations of use
Bolt, depending on the part of the Nut to be worked on (e.g., covered by the exterior of the Scooter, etc.), it may not be possible to work without the Extension bar.
I have about three of them, long, medium and short.
If I can't reach it even with a long length, I combine medium and short lengths to make it even longer. It is self-responsibility.
View detail
Easy to use
It is used to tighten Stud bolts on new Parts and to loosen them from old Parts.
Since it is a KTC, it is convenient for accurate and reliable work.
View detail
strong
Three types of Size often used in Wheel nut are Quantity:It is convenient because it is a Set.
Large sturdy even when used with Impact wrench, but the wall thickness is very thin so that the Aluminum Wheel will not be scratched.
View detail
Convenient to combine
I bought this adapter because I wanted to use my Slide Head Handlebar like a Ratchet.
Even though it has Ratchet function, I use it for most of the work in combination with Extension, etc. because it is small and the thickness is not bothered. Although it cannot be said that the change of the rotation direction is easy, it is not a problem if it twists firmly with both hands.
I liked it so much that I even attached a conversion adapter to use it with my mainstay 3/8 socket even though it has a 1/4 angle insert. (This usage is not recommended because it is easy to be disconnected from the Adapter part when replacing the Socket) 。
One thing that worries me is that despite being a KTCBrand, there are quite a few stories of breakage. I don't use it that hard, so I think it will last a while...
Since it is compact, it is also good as an in-car tool instead of Ratchet Handlebar.
View detail
Best for Sun Machine
It is a socket rail of MAJORBrandKTC of FOR JAPAN MODEL.
At any rate, it's Socket rail, so there's no difference in functionality …
The features of this product are
Socket holding part is all Material:Plastic
It comes down to this.
If you use the cheap Gold Socket rail, the Socket retainer will be rusted and the Socket will be damaged by the rust…
In addition, the socket of the Large half is covered with plating made of Chromoly steel, which has excellent strength but is easily rusted.
On the other hand, this Socket rail is Socket-friendly because it doesn't use any Gold genus in the Socket holding part.
I think it's a high Point to be Socket-friendly, because it's no good if the thing to organize Socket hurts Socket.
It's also easy to identify visually because of the different colors for each size insert.
6.3sq is Yellow color (This product) The 9.5sq is Red and the 12.7sq is Green.
Especially when you want to put multiple Size in one Rail, it is easy to distinguish and use.
The 3 sizes also make your toolbox look more elegant.
On the other hand, Material:The first thing that comes to mind when talking about Demerit because of Plastic is the feeling of use.
Compared to the Ball & Spring Type, it will be a bit more uncomfortable to insert and remove.
In addition, because it is relatively early to become weak, it does not last that long if it is heavy user who inserts and removes frequently, and the resistance feeling when inserting and removing disappears.
However, it's not so easy to get off the polo.
As mentioned above, this is an unquestionable Recommendation for SunMachine that is used infrequently.
I would fully recommend it for Heavy user, but if you are on a budget, you might want to go with the more pricey resin + ball style.
View detail
Just right for Sun Machine.
It is a socket rail of MAJORBrandKTC of FOR JAPAN MODEL.
At any rate, it's Socket rail, so there's no difference in functionality …
The features of this product are
Socket holding part is all Material:Plastic
It comes down to this.
If you use the cheap Gold Socket rail, the Socket retainer will be rusted and the Socket will be damaged by the rust…
In addition, the socket of the Large half is covered with plating made of Chromoly steel, which has excellent strength but is easily rusted.
On the other hand, this Socket rail is Socket-friendly because it doesn't use any Gold genus in the Socket holding part.
I think it's a high Point to be Socket-friendly, because it's no good if the thing to organize Socket hurts Socket.
It's also easy to identify visually because of the different colors for each size insert.
6.3sq is Yellow color, 9.5sq is Red, 12.7sq is Green (This product) It is
Especially when you want to put multiple Size in one Rail, it is easy to distinguish and use.
On the other hand, Material:The first thing that comes to mind when talking about Demerit because of Plastic is the feeling of use.
Compared to the Ball & Spring Type, it will be a bit more uncomfortable to insert and remove.
In addition, because it is relatively early to become weak, it does not last that long if it is heavy user who inserts and removes frequently, and the resistance feeling when inserting and removing disappears.
However, it's not so easy to get off the polo.
As mentioned above, this is an unquestionable Recommendation for SunMachine that is used infrequently.
I would fully recommend it for Heavy user, but if you are on a budget, you might want to go with the more pricey resin + ball style.
View detail
Just right for Sun Machine.
It is a socket rail of MAJORBrandKTC of FOR JAPAN MODEL.
At any rate, it's Socket rail, so there's no difference in functionality …
The features of this product are
Socket holding part is all Material:Plastic
It comes down to this.
If you use the cheap Gold Socket rail, the Socket retainer will be rusted and the Socket will be damaged by the rust…
In addition, the socket of the large half is covered with plating made of Chromoly steel, which has excellent strength but is prone to rusting, and if the socket holding part is made of gold, it tends to damage this plating, which again becomes a factor in the socket being damaged by rust.
On the other hand, this Socket rail is Socket-friendly because it doesn't use any Gold genus in the Socket holding part.
I think it's a high Point to be Socket-friendly, because it's no good if the thing to organize Socket hurts Socket.
It's also easy to identify visually because of the different colors for each size insert.
6.3sq is Yellow color (This product) The 9.5sq is Red and the 12.7sq is Green.
It is easy to use, especially when you can fit multiple insert sizes in one Rail.
reverse engineering:The first thing that comes to mind when talking about Demerit because of Plastic is the feeling of use.
Compared to the Ball & Spring Type, it will be a bit more uncomfortable to insert and remove.
In addition, because it is relatively early to become weak, it does not last that long if it is heavy user who inserts and removes frequently, and the resistance feeling when inserting and removing disappears.
However, it's not so easy to get off the polo.
As mentioned above, this is an unquestionable Recommendation for SunMachine that is used infrequently.
I would fully recommend it for Heavy user, but if you are on a budget, you might want to go with the more pricey resin + ball style.
View detail