Reviews
Stable KTC
I chose KTC in part because of KTC.
I have been using SIGNET tools for a long time, but I also like KTC as a Brand with stable quality.
Since it is a tool, a reliable Brand is good for mental stability.
View detail
When double nut is not available.
I bought this to pull out the sprocket bolt on my SR400.
The reason why we went to the trouble of purchasing the hub clutch is because the SR400 hub clutch has a convex shape for CenterRinging the Sprocket.
This is because the distance between the convex part and the stud bolt is so close that a double nut cannot be used.
I was wondering if I would have any luck using the OEM Nut since it is so thin. Unfortunately, the second one bites only one pile and cannot hang Torque properly.
I had no choice but to buy a special tool.
Still, it was a bit odd to remove the screws because they were coated with screw locks and mine were very sticky.
Fortunately, since it was a RoseRose, access was possible from the back, so I was able to finally remove it by searing it with a raspene, drilling a hole in the center, and pulling out the Torque.
The structure of the Stud bolt remover consists of three Pieces that move and hold the Bolt when it is rotated.
The structure was like a Cell starterClutch.
The screw threads are held in place by the three pieces of the bolt, either on the face of the screw threads or by a line perpendicular to the screw threads, so the screw threads are crushed. Basically, the removed stud bolt cannot be reused.
Since it is possible to engage the stud bolt in the reverse rotation direction, it is possible to loosen the Opposite Thread Screw or tighten the Normal Thread Screw, but as mentioned earlier, the screw threads will be crushed, so it will be a very special application when used for tightening.
It can be used for round bars as well, since it does not need to be screwed structurally.
Maybe it would be good for a sticking Knock Pin or something.
I purchased For M8 this time, so I can use it for Big bike's Exhaust System and so on.
If you have For M6, I think you will have no problem with most large stud bolts.
View detail
It is easy to arrange a price at a low price.
It is easy to arrange a price at a low price. View detail
Buy for additional Socket
I bought it to add additional size to my Socket set. It seems to be a little expensive, but considering that the design and size are perfect, I think that it is unavoidable. 5 all in 1 pc Rail is tough, but if Socket increases in the future, I think that I will buy and use Rail itself. View detail
Cleanliness
In order to develop Motorcycle by myself, I also fought Torque's high places, so I bought a Holder to put together the Socket that has increased with that
6. 3sq and 9. I had a Holder of 5 sq, but the basic structure is the same although the colors of Size and Clip are different. Although you can increase or decrease Clip according to your preference, Holder becomes heavier than you think
Clip is Material : Because it is Plastic Material : Although it is inferior in quality to Alder Holder, its price is cheap and it is necessary enough to put together for now. There is someone who wants to arrange the contents of the tool box in Beauty
View detail
9.5sq. Socket Adapter
I purchased this adapter because I purchased Lock Nut Wrench mistake Size by mistake. Although it is reliable as a tool Manufacturer, it is slightly expensive, but you can use it with other tools so you do not regret it. Building is the best. View detail
Things are fine but Size is subtle
Purchase for sorting of Socket which does not use normally and Socket which is not used normally.
I chose a Clip number of 15, but because there were so many Socket of Large Size, only 14 Sockets were entered.
Since Socket is plugged into the Clip as it is, there is no function especially for falling out, so sockets with poor precision are missed just by upside-down.
I think that both ends are wastefully long so I can make it a bit more compact.
From the ease of use 1 Quantity : 5pcs. It may be more convenient from the storage surface to buy two more than one 10.
View detail
He is a Maintenance beginner. From the thing whose actually used frequency is vainly higher than a Set article with many mark to purchase Since it was the beginner, and many could not be touched to there, they were just right goods. As soon as
He is a Maintenance beginner.
From the thing whose actually used frequency is vainly higher than a Set article with many mark to purchase
Since it was the
beginner, and many could not be touched to there, they were just right goods.
As soon as a Size besides
is needed, the additional purchase of it is due to be carried out.
A temporary safe home manufacturer's KTC.
The
Ratchet handle, an Extension, and this Socket set.
It is convenient if there is also a T character Handle further.
View detail