Reviews
Brass Brush, this is the one.
[How is it used?
For cleaning each part during EngineOH
Was the one you received as per Image?
As per Image
How was your experience with it?
No problems at all. It is an excellent cosmetic product.
[Points to note]
None in particular.
How did it compare to other products?
This is all I do Repeat.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
It is very convenient for maintenance of motorcycles because a small amount of grease comes out only as much as you press it, so you can apply it without getting your hands too dirty. View detail
I just wish I'd known about it sooner.
I bought it because it looked easy to use and most importantly, it looked cool after watching the video of the Suzuka 8 Hours Endurance Race.
As expected of KTC, the movement is smooth and will be active from now on.
I appreciate that such a useful item can be purchased at this price.
View detail
Rim inner rust remover use
Used to remove rust from the inside of the rim when replacing the tire on a CUB.
Scrub with this and a steel scrubber
It would be useful if it were available.
It's not something normal people have much use for, though.
View detail
Reliable Manufacturer Thickness Gauge
[How is it used?
YAMAHA XJR400R (07 year) Purchased for Gap adjustment and future EngineTappet adjustment of Plug to be used for
Was the one you received as per Image?
It was as shown in the Image, but it was smaller than I expected, so I am a little worried about how well I can adjust the Engine Tappet.
How was your experience with it?
It's working fine
Currently I only use it to adjust the Gap on the Plug, but I was able to adjust it without any problems.
[Points to note]
The product is quite thin, so care should be taken not to lose it or break it during use.
How did it compare to other products?
I have not used other products, so I can't speak much about them, but I am grateful to be able to purchase this product at this price.
These small parts tend to be expensive because they are not in high demand but need to be accurate. I am also grateful that KTC, a reliable manufacturer, is providing them.
Other items that would be helpful
Opinions and requests for Manufacturer:To be honest, I think it is a little difficult to use 9 sheets. It would be great if we could increase the number of sheets by at least one more and make more detailed adjustments.
View detail
Very easy to use!
I've been using it to polish up the Rust part and it's still going strong! I've been using it for about 10 years now.
The only sad thing about the Week Point is that the KTC letters are peeling off so fast…
View detail
I'm a clumsy person.
I purchased the Locker Arm Tappet adjustment because it seems to be easier to fine-tune the Locker Arm if this angle is even slightly adjusted. View detail
As expected of KTC, easy to use for what it is.
I purchased this product together with CUB's RightSTAND when I installed it.
You can hold the hook part of the spring with pliers and hook it to the pin by force, but if the hook part gets scratched, it will lose strength, and it is not SMART.
It is not every day that Spring is replaced, but this was a small price to pay for the peace of mind it gave me.
View detail
KTC Tension Spring Tools
I did not have a proper tool for removing and installing springs, so I purchased KTC's Tension Spring Tools.
It is useful to have a well-made tool for maintenance of scooter and removal/attachment of exhaust system.
When I actually used it, I was able to use it with confidence because I could apply force firmly against the tool.
View detail
Good
It is useful for picking up Nuts and Bolts that have been dropped in a crevice.
The magnetic force is strong enough so that it will not fall off in the process.
Shaft free, so it is easy to reach the targeted area.
View detail
Convenient to have
I bought it because it picks up Bolt, etc. dropped in the crevices.
It has sufficient magnetic force and is Flexible and bendable to pick up objects even in tight spaces.
The texture is also solid as it is made by KTC.
It doesn't feel like it will break while in use.
If you do your own maintenance, especially around the Engine
I think it is essential to have it.
However, the price is high.
The evaluation may differ depending on what you think of this price.
View detail
Thickness Gauge
About quality and texture - Excellent quality, nicely stamped steel sheet with no rough edges. About the feeling of use - I have the longer set which works great in all the situations I have used them in so far, allowing for two hand operation. Products to buy together - Great idea to add a spark plug gapping tool to your measurement tooling, NeoFactory have a nice afforadable one, product # 016520. Difficulty of installation - Easy to select the correct size with the nice visible labelling on each guage and easy to manoeuvre with the long series gauge set. Cost performance and comparison with other products - The long series set is expensive and if you can afford it worth the extra cost but Webike have more afforadable options in their hand tooling others menu. About shipping and packaging - Arrived on time and without damage from the well packed and affordable sea freight. Any concerns, cautions, or advice when purchasing - Read the product listings for the thickness gauges carefully as some are labelled in mm and inches but not all. View detail
Outstanding Made in Japan Prybar.
I have been trying to source Made in Japan prybars for a quite some time now. Unlike the Kowa models these are actually made in Japan and are very nice and scream quality. You don't need the giant ones offered by other manufactures to work on motorcycles and I'm happy to report that all 3 sizes are fantastic. I puchased all 3 sizes offered and I think they should sell them as a set. For whatever reason the shortest one is the most expensive and almost twice the cost of the longer 2. View detail
You'll be working more efficiently!
If the Bolt etc. comes loose, this will turn it round and round!
It's a Recommendation because it makes the work more efficient...
View detail
You'll be working more efficiently!
It is useful to install the spring in the Exhaust System replacement etc.!
It will also lead to an increase in work efficiency.
If you're a DIYer, I think it's worth having!
View detail
Exhaust SystemFull Exhaust System Replacement
It is used for spring pulling when KFactory titaniumFull Exhaust System is replaced. It was able to work easily thanks to this thing though it was necessary to pull it by considerable power. View detail
Increased work efficiency
Before using this, I used to grab the Silencer spring etc. with a radio pen, but it slipped and came off, or I scratched the spring when I gripped it hard. View detail
It can be used to power through tight spaces.
If you don't have it, you can use Glasses instead, but it is very useful. Once you use it, you will be impressed by the efficiency. View detail
It's my rust-removing buddy.
I use this product to remove rust from the exhaust system of my ksR2 and many other motorcycles. It's not too hard, not too soft, and has a good attack power on the material. View detail
I can't wait to add it to my toolbox friends.
I was not sure if it is the same as Tone Tool, but Kyoto Tool is Red color and the handwheel is Material:It's made of Plastic so if it falls out of your hand it won't damage the other parts. Tone looks like it's made of some kind of steel in the picture….
Hand tightening the rear caliper bolt is now easier.
View detail