Reviews
Size is good though.
It would have been easier to use if the tip was a little thinner, so I shaved it off and used it. View detail
Outstanding Made in Japan Prybar.
I have been trying to source Made in Japan prybars for a quite some time now. Unlike the Kowa models these are actually made in Japan and are very nice and scream quality. You don't need the giant ones offered by other manufactures to work on motorcycles and I'm happy to report that all 3 sizes are fantastic. I puchased all 3 sizes offered and I think they should sell them as a set. For whatever reason the shortest one is the most expensive and almost twice the cost of the longer 2. View detail
No need for brute strength
KTC seems to have the spring of the Drum Brake Shoe of the car in mind, but it can be used for various spring-related attachment and detachment.
In the case of motorcycle, there is a certain amount of scene to handle the spring even if it is not equipped with fixed spring of external silencer, side stand spring etc. and drum brake. There is a fear that the spring may be blown off or the parts may be damaged.
With this tool, you can safely install and remove the Spring without using too much foolishness by the principle of leverage. It's a great tool especially for people like me who have no arm strength.
View detail
Although I bought it.
I thought it might be useful.
I'm not sure which scene I'm going to use it for, it's been sitting in my toolbox.
Someday the sun will shine!
View detail
You'll be working more efficiently!
If the Bolt etc. comes loose, this will turn it round and round!
It's a Recommendation because it makes the work more efficient...
View detail
You'll be working more efficiently!
It is useful to install the spring in the Exhaust System replacement etc.!
It will also lead to an increase in work efficiency.
If you're a DIYer, I think it's worth having!
View detail
Sufficient magnetic force.
The size of the magnet is on the small side, but it has enough magnetism to pick up a Nut or Bolt that has been dropped. It is easy to reach the target place because complicated movement of Shaft is possible even in a narrow place. View detail
Convenient quick-turn tool
This will come in handy.
When you tighten it temporarily, you can turn it round and round to make your work more efficient.
I just think the texture of Plastic is a bit….
I went with KTC because I wanted to keep it together, but the texture is better on the Tonne.
View detail
Lowest price for a KTC tool! Great product!
Brass Brush is the cheapest class of products with KTC's name on it.
I've been using various Brushes, and I can say Normal This is a product of
I rather like the bamboo Brush. Because it bends.
This product is different, but still "KTC" It's good that Logo is in there.
This is how I see Sunday mechanic, I think we need it!
There is nothing wrong with the feel.
View detail
Exhaust SystemFull Exhaust System Replacement
It is used for spring pulling when KFactory titaniumFull Exhaust System is replaced. It was able to work easily thanks to this thing though it was necessary to pull it by considerable power. View detail
Increased work efficiency
Before using this, I used to grab the Silencer spring etc. with a radio pen, but it slipped and came off, or I scratched the spring when I gripped it hard. View detail
It can be used to power through tight spaces.
If you don't have it, you can use Glasses instead, but it is very useful. Once you use it, you will be impressed by the efficiency. View detail
It's my rust-removing buddy.
I use this product to remove rust from the exhaust system of my ksR2 and many other motorcycles. It's not too hard, not too soft, and has a good attack power on the material. View detail
I can't wait to add it to my toolbox friends.
I was not sure if it is the same as Tone Tool, but Kyoto Tool is Red color and the handwheel is Material:It's made of Plastic so if it falls out of your hand it won't damage the other parts. Tone looks like it's made of some kind of steel in the picture….
Hand tightening the rear caliper bolt is now easier.
View detail
It's pretty solid.
I bought it to try out for stubborn dirt, rust removal and polishing.
Material (Pattern) Steel and solid, and the brass part of the brush section is tightly packed.
I'm happy with the price, but then I hope it will last some longer in terms of durability.
View detail
normally
It didn't seem to have a bad reputation, so I bought it to try it out along with a similar product. No difference between the look and feel and Large.
I thought the cheaper option would be better because it would wear out with use.
View detail
Logo is cool.
I used it to remove the Rust from my Motorcycle Chain, but the size is easy to grip and polish, so the work efficiency was good. View detail
Active in tight spaces
The length and angle of the Compact can be adjusted freely and it is very easy to use in a small space. It is easy to check for oil leaks in hard to see places. View detail
It's useful to have one other than Ratchet.
I often use the Ratchet wrench because it's easy to turn, but there are places where the Ratchet wrench is not available due to space issues, etc.
This handlebar can be tipped with Extensions, or used as a handlebar in places where the Ratchet wrench is not available.
It's also very portable, so it's not a bad idea to have one.
It looks like just a stick, but as expected of KTC, the details are just right and easy to use.
View detail
Good stuff
I wanted to see a Channel that I've been watching a lot on YouTube lately that used something similar to this.
The thing is solidly built, has a good size and is very easy to use, and with the Ratchet it is very easy to work with, allowing me to quickly put on and take off the bolts and other parts. It may not be suitable for places where the torque is strong, but it can be turned quickly with a single body, and I think it is great for reducing the working time.
View detail