Reviews
RokudaboPlug replacement
[How is it used?
Purchased with Plug as it is needed to replace Plug in CBR600RR PC40.
Was the one you received as per Image?
The quality of the plug wrench is good and the magnet in the plug wrench makes it easy to catch the plug.
How was your experience with it?
As a plug wrench, it does its job well and is highly rated for its texture.
However, since this was my first time replacing a 4-cylinder plug, I struggled with replacing #2 and #3 and eventually gave up and asked Motorcycle shop to do it for me.
We were told that a less thicker plug wrench would be more suitable.
I don't know if I will have to come back to it in the future, but it was good as a Plug wrenchSingle Body.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Simple form and easy to use
I was looking for a simple and reliable tool like an in-vehicle plug wrench from a well-known tool manufacturer, and I found this product and immediately bought it because of its low price.
The price is a bargain, but the quality is so high that it fits perfectly with the plug diameter, as you would expect from a KTC product.
The rubber inside the wrench gently holds the plug in its mouth so that there is no danger of dropping it when it is removed.
Also, the tool is available in two different thicknesses at both ends:16mm = CPlug and 20.8mm = BPlug, so it can be used with CUB and MONKEY. (CPlug) and 2-stroke VESPA (BPlug) This is more convenient for me as an owner of a
However, since it is a straight type, it may only be used on cars with a large space above the plug hole.
The L-shaped bar is also very easy to use because of its ingenuity in making it possible to use it even for car models that are difficult to get space to turn.
The simple shape makes it easy to pack, so it would be excellent as an in-vehicle or portable tool.
Durability is still unknown, so it was not rated yet.
View detail
Necessities
[How is it used?
I compete in Enduro races with my RM250, and since it is a 2-stroke, I often have to change plugs, and I have been using this plug wrench for a long time.
I lost it during a Race the other day and had to buy it again. My Machine does not have good access to Plug, so I have to choose this Wrench.
Was the one you received as per Image?
As per Image. And I used to use it.
How was your experience with it?
The length is still exquisite. It is possible to reach the Plug by passing through the Glasses. The Glasses part is notched so that it can be inserted through the plug's guyliner.
[Points to note]
How did it compare to other products?
I think there was a good one from HondaOEM Parts, but I heard through the wind that it has been discontinued.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Since it is just going to concern with an engine, it is as a thing of there there.
Since it is just going to concern with an engine, it is as a thing of there there. View detail
NGK.DENSOPlug either is acceptable
There is another Plug wrench, but the size did not fit, so I bought the size that fits.
KTC is safe and secure, and there are no problems with its use.
It is almost never replaced, so it will last a lifetime.
View detail
A parallel two-cylinder 2Cycle can reach it!
I purchased this product to use for R1-Z.
So far, I have not had to replace the plugs on the road, but I have a set of plugs and this Wrench tucked under the Seat.
Please note that if you have a parallel TWIN 2Cycle, it has a shape that can be used donpically, but if you have a 4Cycle or other Plug in a secluded location, it is almost impossible to use it.
In this case, we recommend a SocketType Plug wrench with Rubber inside to keep it from falling off.
This Wrench has a notch that allows the Plug Cable to be inserted even in tight spaces.
It is convenient to have one because it is not hexagonal and can be tightened little by little.
View detail
Lightweight and easy to use
[How is it used?
Purchased because I could not find OEM supplied tools.
There is a Rubber inside, and when the tool is pulled out of the Plug hole, the Plug can be pulled out together.
The same is true when installing the plug, which allows the plug to be dropped deep into the hole to minimize the risk of damaging the electrode.
Was the one you received as per Image?
Yes
How was your experience with it?
Easy to use
[Points to note]
None
How did it compare to other products?
Lighter than OEM
▼ Other items that would be helpful include
Is the unit production cost 10 yen?
View detail
Ideal for on-board tools
I use it as an on-board tool for my KawasakiZ1.
It is a cheaply built but very easy to use plug wrench.
This compact size is perfect for the Z1, which has less luggage space under the seat.
View detail
Getting ready for my first DIY Plug replacement in about 30 years (Part 2).
In order to convert from the BriskPlug to the DENSO, I arranged the size of the JAPANPlug for the JAPANMotorcycle with the JAPAN tools, so there should be no problem. View detail
I'm ready for my first DIY Plug replacement in about 30 years.
When I was a student, I used to replace the Spark plug myself, but after I started working, I had the shop replace the Spark plug when they inspected my car.
I've been thinking about it for a while now, so I decided to replace it myself, but since it's the first time in 30 years that I've done it myself, I bought a reliable tool to avoid trouble.
Especially, since there seemed to be the one that Screw precision was bad for the B-RiskPlug being installed...I really want to avoid Trouble at the time of removal.
The Magnet holds the Plug firmly in place and I was able to work reliably.
View detail
Easy to work with Magnet
It is a general with Magnet's Plug wrench.
I noticed after I bought it that it was a rare 12 square Type.
Naturally, you can also turn the regular hex Spark plug.
Plug wrench is necessary because Plug falls in a normal Deep socket.
This Wrench is thinner walled than a typical Socket, making it easier to work in tight Plug holes.
View detail
I'll stick with KTC for my tools!
[How is it used?
I bought this for my XJR1300C Plugfor Replacement.
Was the one you received as per Image?
The quality of KTC is as good as the image. It is a quality that can be used with confidence.
How was your experience with it?
Firmly adheres to the Plug, no worries about use whatsoever!
In addition, as shown in the image, the Magnet holds the Plug firmly, so it is easy to use without falling off when tightening or removing.
[Points to note]
It's not about the tool, but make sure you use a torque wrench to tighten it.
How did it compare to other products?
I also have a cheap Plug wrench, but the ease of use and accuracy is outstanding.
View detail
A must-have for any 2-stroke motorcycle rider
Many 2-stroke motorcycles have a plug sticking out of the engine, so it is easy to access the plug by looking through the engine from the side.
If it turns round and round with Wrench etc. without using the Plug socket etc., it is possible to remove immediately, but when it roams with Net, it finds this commodity which seems to be more convenient, and purchases.
Normally I would buy a tool that I can use for a variety of things, but this product is a tool for removing and installing the plug, and it's not a cheap 100 yen 200 yen tool, it's over 2000 yen. But when I actually used it, I wondered why I hadn't used it before! But when I actually use it, I wonder why I didn't use it before!
If you have a 2-stroke motorcycle and want to make maintenance a little easier, we recommend you purchase this product as soon as possible.
View detail
KTC is the basic tool for garage
Garage's basic tools are KTC, Wrench, Ratchet, Hex, Torque, and Plug wrench are all KTC. View detail
Trusted KTC
I used it to change from NORMAL Iridium plugs to NGK DXPlug on CB250R. The tool of KTC is reliable. The price is a little high, but I bought this slim product because I don't want it to fit in the narrow plug hole. The performance was as expected without any sticking. I used TONE's Extension bar and Ratchet, and finally tightened it with SK-11's Digital torque wrench. The built-in magnet is also strong, and I was able to exchange the Plug without dropping it. View detail
Anyway, it's easy to use.
I bought it for a HusabergTE125 Plugfor Replacement.
It's very easy to use because it's easy to turn in tight spots and apply moderate force. It's not too long, so it's hard to damage the Screw hole of the plug by overtorque. It is also a point that there are
View detail
To replace the plug in TW200
Purchased because there was no size that fit the Plug wrench in my hand
The work is done with a stable KTCBrand with no problems in use
With Sunday mechanic, if you buy 1 pc, it's something you can use for the rest of your life
View detail
50cc Plugfor Replacement
Because there was no plug wrench for 16mm, I bought it It is not possible to remove the plug with the handy socket wrench, so I bought it because there is no plug wrench for 16mm I had to remove it, but it's made by KTC, so I'm using it It's very easy to use View detail
KTC for peace of mind
I prefer to use KTC tools
The magnet grips the plug tightly, so you can use it as a
Plug replacement can be done with peace of mind
The Magnet is not too strong and not too weak, so it's easy to use
It's not something I use often, but that's why I want to use a good one
View detail
Convenient with with Magnet
With Magnet, it is convenient when loosening, when installing. Especially when installing, you can install without giving Damage to Plug.
Can be relieved with KTC made of high quality.
View detail