Reviews
Confidence. Reassurance. Aha, overconfidence.
[How is it used?
I feel like I've probably been using it since the YZF-R25, maybe the R6 all along.
R25:Mileage is about over 20,000km
R6:Mileage of about 69,000 km
Of the above, I think I replaced it about 3,000 km and used KN-204 about once every 2 times, and I think I used KN-204 about 5 times out of the 2, so I probably used it roughly 10 times to attach and detach it.
Was the one you received as per Image?
It comes in a Simple box and the product is as per Image.
BlueWhite shining Gold, but not Gold like tools with a Gold feel mixed in.
How was your experience with it?
A sense of security because the tools are from a well-known manufacturer.
Oil filter used for connection and disconnection
1.YAMAHA OEM5GH-13440-50:https://www.webike.net/sd/25727395/Initial installation and one time thereafter
2.KIJIMA 105-833:https://www.webike.net/sd/20386956/Unless otherwise noted, all are here.
3.Vesrah I don't remember what it is, but I remember using it once.
Not a wide vehicle in Space, but can be used by fitting tightly into the Filter
I used it with a 9.5sq Ratchet and it didn't come off.
I'm not sure if it's a little forward or a little oblique, but it's a little good.:I tried to remove the Filter while it was still set and licked it to a large. 。 It is a solid tool, but it cannot be handled carelessly because of overconfidence.
[Points to note]
As mentioned above, even a good tool will fail if handled carelessly.
How did it compare to other products?
・KN-204:https://www.webike.net/sd/19861663/Although this is not a pure tool comparison, KN-204 is easier in terms of attaching and detaching filters. In terms of price, the KN-204 is the better choice for long-term use, and it is the only product that can handle with MagnetFilter.
It is a product of a well-known manufacturer, which makes maintenance fun just by owning it. The weight of the product also gives the impression of solidity. However, it does not allow for improper use, so I feel that it will lead to careful maintenance of my car.
View detail
Castings, good stuff (cold! (Gobble!)
I was heartbroken by the DAYTONA product, so I hung on to KTC.
Although the company is an expensive Image, we were able to purchase the product at a reasonable price, perhaps benefiting from the Large volume production.
The DAYTONA-made steel plates were thin and expanded when Torque was applied, but the KTC-made plates were made of heavy cast metal.
It fit tightly into the OEMFilter and loosened easily.
I had a terrible prejudice against cast metal as cheap, but my view has changed 180 degrees.
Quality and Rigidity. Come to think of it, Wheel was Casting too....
View detail
Solid Filter wrench
Used in GSX-R1000R 2019
Size66.5 corresponds to SEA BASSOEM's Cup type Oil filter.
SEA BASS cars, in general, have oil filters that are specified to be tightened stiffly.
It is 720 degrees from seating, not Torque indication.
If you use a filter wrench that is not accurate enough, you will get a "slippery" result.
Once it is wet, it is no longer good.
You will have to struggle to remove it with that kind of parpray.
I have been using SEA BASSOEM's Filter wrench for about 8 years now.
Some overuse over the years. (?) I guess my addiction has become too much for me, but the other day I finally got it.
When it came to removing the naff Oil Filter, it was a Large strange thought.
So, we purchased this product instead.
Compared to SEA BASSOEM, the range of the surface is deeper, or perhaps the Fit feeling when fitted to the Filter is better here.
The thickness of the wrench is also thicker, and the inner shape is more precise, so I think it will last longer.
Note that the hexagonal part that pops out has a two-sided width of 24mm and SEA BASSOEM (17mm) The size is considerably larger than the
Basically, the drain bolt on SEA BASS cars is 17mm wide on two sides, so the OEM product is very easy to work with in terms of its wrench.
However, this product is not exclusive to SEA BASS, so it cannot be helped.
Ratchetetc. will require ridiculously large Glasses when used with models that are strictly height-oriented, so be prepared for that.
If not, a 9.5sq Ratchet can be used.
In addition, it is necessary to carefully examine the oil filter to be used and to observe the torque for tightening.
The wide range of size lineups makes it a good choice for those who want a filter wrench.
View detail
One is handy.
There are many different types of oil filter tools available, but the Cup is the most effective way to remove the cartridge type oil filter without crushing it. View detail
Lightweight and easy to use
It's lighter and easier to use than I thought it would be In case you're wondering, it's a few hundred more to the Honda OEMOil Element, but it's much cheaper There are some Filter wrench-wearing ones that you can use If you can use it, it's more cost effective View detail
It's Die-casting!
Die-casting instead of the usual ElementWrench made by PRESS (Castings, RoboMaterial in Poppy, which means super synthetic gold)
A masterpiece of self-indulgence
It's a quality that Sunday mechanic doesn't need
I don't have to force myself to choose this one, and anything I could use would be fine, but I wanted to buy something before the tax increase And when the WebikePoint deadline is nearing, I was agitated to buy it. w
I tried to match it with the Element I have, but the fit is appropriate 。 With this KTCCupWrench, you can hang the demon Torque when it's not loose and it won't slip
I guess the crying point is the price, not the difference between the two, which is not the difference that I LARGE
If you change the oil element every 6,000km, you'll have to drive 18,000km to get your money's worth Right
Unlike cars, there are only a few places where you can change motorcycle oil, so you can do it yourself For those of you who can do it, it's easy maintenance and it doesn't feel like you bought time
If you plan to ride out your current car, or if you don't feel comfortable doing whatever it takes to do it yourself, tools Recommendation to Mania
I dared to set the question of whether you can recommend to a friend a no
A friend of mine would lend you the W
View detail
KTC is still good
Purchased for Replacement of Oil Filter for VFR400R (NC30) It's not something I use often, but it's a must-have tool for Filter replacement I don't use this tool often, but it's a must-have tool for Filter replacement I'm satisfied with that View detail
Once you buy it, your lifetime
【What made you decide the purchase?】 There was an article which is actually used for Element exchange of BMW at the goodness and reliability of the top BrandKTC of domestic tool, Impression of webike, it was able to purchase without anxiety.
【How was it actually used?】 Although it was used for the Element exchange of R1150GS, it was able to exchange Element without Trouble, matching OEMFilter with Exactly because it was 14 mm square of 14 mm square and import for Vehicle.
【Was it difficult to install? (Hard parts case)】 It is not a Hard parts, but normally it has an insertion angle of 9. If you have a 5mm Socket wrench you can use it.
【Please tell me the point of installation and hang (in the case of Hard parts)】 As the comment at the time of use as Filter wrench corners are rounded because Filter side corners are rounded up, Filter wrench gets bitten bitten, but if you hit it lightly with Hammer etc. for easy removal.
[Is there anything I was disappointed about?] There is nothing disappointing especially when making is solid. It is truly KTC.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Since it is not a frequently used tool, : If it is a Plastic Package, I will appreciate it for individual User because there is no dirty and dirty with Oil.
【Have you compared items?】 Hiroche's Filter wrench. I was wondering if I was going to buy this because the price was cheap, but since I heard that Wrench of PRESS molding is deformed when used forcefully when the Filter sticks, sometimes it becomes useless, so even if it is high, I made this Filter wrench.
[Others] Until now, only Oil replacement was done by oneself, Element exchange was necessary when dealer was checking with Dealer, but due to the fact that Dealer is far away Timing often can not be exchanged, so this time purchasing Filter wrench I took it. Reliable Since it is a product of KTC, you can exchange work at all with Torque wrench as long as you manage Torque. It's a little expensive, but once you buy it is a tool of one creature.
View detail
[Webike Monitor] expected passage. Truly, it is KTC. It was shopping satisfactory also in price.
[Webike Monitor]
expected passage.
Truly, it is KTC.
It was shopping satisfactory also in price.
View detail