Reviews
KTC Slotted screwdriver
It felt good in my grip and I was able to apply force well.
I was able to successfully remove the screw that I could not remove using a cheap tool.
View detail
It is a useful tool when one is in a tool box. Quality is also a problem pear if it is KTC!!
It is a useful tool when one is in a tool box.
Quality is also a problem pear if it is KTC!!
View detail
I've been using it for years.
The handle is large, so it is not suitable for light turning.
The precision is outstanding, and I guess KTC is made in Japan.
The part to turn with force is also secure, and it is hard to use other cheap tools.
View detail
Minus to match Plus.
Since I already had a Phillips screwdriver, I wanted a slotted screwdriver as well.
Like Plus, the handle is large, so it is not suitable for light turning, but in the case of Minus, it is used when applying a lot of force, so it is not MinusPoint.
View detail
For removal of Air cleanerBox.
It was a Plus screw on the Air cleanerBox, so I bought it to turn there.
The Grip is also shaped for easy grasping and use.
I thought it might be a little expensive compared to another Manufacturer, such as Home center.
We chose KTC because it is a reliable tool that can be used for several years.
Minus is also a Quantity:I thought it was a Set and bought it together.
View detail
Easy to grip, though.
It is not suitable for twirling.
The accuracy etc. is preeminent, and it is as if it is KTC.
You can turn the part with force without worry.
However, it is a little large pattern to use for motorcycle maintenance.
I'd like to see a small one in the line up too.
View detail
Purchased to match the Plus
Purchased to match my Plus Driver.
Square Type is easy to grip and easy to apply force.
It's a good shape for the Minus, which is prone to nicks.
But! Because the pattern is large, it is not suitable for tightening the exhaust band etc.
It might be a little disturbing.
View detail
It is a useful tool.
I don't think there is another driver that is as easy to use as this one, and as the name implies, the Ratchet driver is easy to use with no complaints about screw tightening and loosening. View detail
It is efficient for working in tight spaces.
Effective for tightening and loosening Screw in tight spaces. It is recommended to use it in places where you don't need a strong torque. I think it can be used with only finger pressure and is suitable for the installation of the Mud Guard of the car. View detail
In times of emergency
It has been used for 20 years, but recently it is a Driver whose turn has become less frequent. Easily loosening Screw is easy to use Vessel's Grip is Ball type, so here is fixed and active in Vessel when it seems to be licking. Penetrating Driver Overwhelming Large's Screw by turning it while shocking. View detail
Sturdy
Although I purchased it in 20 years, I can still use it on the active side. Penetrating Driver also sometimes used pretty rough usage, but it is Tough that can not be cheap. View detail
Driver of count 1 has few scenes that can be used
Since I purchased Penetrating type Driver of the same series, I tried to purchase this product with the first count by trying to arrange it in one place, but now I can not find a place to use in our Motorcycle.
So I tried using it for purposes other than Motorcycle, but again I choose Screw for automatic for Vehicle.
Although I can turn it without licking firmly, I can not turn Screw which can be turned by No. 1 Driver which is not Automatic for Vehicle of other Manufacturer.
If you put it in a tool box it may be useful time someday because it is a Penetrating expression, but I think that it is not necessary to forcibly buy a person who is not necessary so much.
(Since it is heavier than Non-Penetrating one, it will increase the weight of the tool box... )
View detail
We do not recommend regularly, but where we need power ○
Not to mention Japan Manufacturer, but more than anything, price is cheap for Specifications.
Although it is an impression of using it, I do not recommend regularly because Driver itself is heavy.
I think that there are individual differences, but the handle is not cylindrical and it is square "Hold firmly and put your strength" It is very easy to use for minutes, but it is so tightened so strongly (removal) It is hard to use for the part that you do not need.
Also, as mentioned earlier, the Driver itself is heavy, so to handle lightly it needs to be strong so it gets tired when used continuously.
It is a bit disappointing that it was heavier than other Manufacturer's Penetrating formula, but it seems that the strength is so high.
View detail
Super Long Driver
I would like to tighten ZXR's intake maneuver, but in ordinary Driver Frame and Head cover do not get in well and do not go well (T_T)
This KTC Driver has been tightened from 1st to 4th from One Side! Moreover, as expected, Magnet is also strong with KTC, Screw does not fall! It is convenient for a motorcycle rider who has a narrow, deep place Screw It is!
View detail
Easy to use
It is easy to have a sense of rough feeling of Rubber rubber and a square of Grip part and to put in force. When Screw is stiff, it requires pushing force and twisting power, but it is easy to put in force. I like it more than a round hand. Because it is a Penetrating formula, you can knock on the head of the handle. I can recommend it.. View detail
It purchased for maintenance of a CARBURETOR.Although it is a tool without a use besides , maintenance will be impossible if there is this [ no ]. It may be close to a certain semantic special tool.Since it was purchased after the Driver itse
It purchased for maintenance of a CARBURETOR.Although it is a tool without a use besides , maintenance will be impossible if there is this [ no ].
It may be close to a certain semantic special tool.Since it was purchased after the
Driver itself investigated the Size, it was an Exactly at the use.It is called good weight with
die length, and is ordinarily easy-to-use.
View detail
I think that the Grip which , especially the Slotted screwdriver which have only KTC which is a classic case of a domestic tool Manufacturer, and can perform positive conclusion turn, and it is thick and can be firmly grasped since it is hot is very e
I think that the Grip which
, especially the Slotted screwdriver which have only KTC which is a classic case of a domestic tool Manufacturer, and can perform positive conclusion turn, and it is thick and can be firmly grasped since it is hot is very effective.
View detail
The Driver of safe KTC was chosen. since it is penetration Type and a Hammer can strike the back of a handle -- -- I regard many things as probably user-friendliness being good. -- the time of however, being purchased, since it is sho
The Driver of safe KTC was chosen.
since it is
penetration Type and a Hammer can strike the back of a handle --
-- I regard many things as probably user-friendliness being good.
-- the time of however, being purchased, since it is short more than it imagined --
-- I consider that it is better somewhat to choose slight length.
(it is hard to use a bad point is Colet (although it is whether to be in - -;
explanation, since the tip of the Driver is the
magnet, there are no
worries about a screw thread which are attached, are removed and are sometimes dropped!))
View detail
The Driver of safe KTC was chosen. -- since the phillips screwdriver was purchased together -- a Review -- -- Although it is together ... since it is penetration Type and a Hammer can strike the back of a handle -- -- I regard man
The Driver of safe KTC was chosen.
-- since the phillips screwdriver was purchased together -- a Review --
-- Although it is together ... since it is
penetration Type and a Hammer can strike the back of a handle --
-- I regard many things as probably user-friendliness being good.
-- the time of being purchased since it is unusually short at which it merely imagined --
-- I consider that it is better somewhat to choose slight length.
(it is hard to use a bad point is Colet (although it is whether to be in - -;
explanation))
Since the tip of the Driver is the
magnet, there are no
worries about a screw thread which are attached, are removed and are sometimes dropped! The color of a Grip calls
green the difference from the
phillips screwdriver.
(it is as seeing a goods picture)
View detail
Probably, it just called it KTC truly. It cannot compare with the one-set tool purchased in a vicinity Home center etc. a fasten lump of a Screw -- removing -- compared with a cheap tool, the credit condition of power is different. already --
Probably, it just called it KTC truly.
It cannot compare with the one-set tool purchased in a vicinity Home center etc.
a fasten lump of a Screw -- removing -- compared with a cheap tool, the credit condition of power is different.
already -- I think that he also wants large one three Sizes.
View detail