Reviews
Excellent Ratchet
This Ratchet has a high quality luxurious feel. I have used twice since recieveing more than a week ago and find myself reaching for it between projects just to appreciate the feeling of it in my hand. This tool is very useful in tight spaces working on the back of the engine block between the block and firewall, or underneath the windshield cowl. The swivel provides a favorable angle, and the ratchet offers low backdrag and lots of leverage. I am on the east coast of the USA and DHL delivered this package in only 36 hours. Webike is an excellent vendor. View detail
It's still good
I think it is indeed KTC. I have never used SwivelRatchet before.
The head part is small, and the swivel can be adjusted to your liking, making it easy to use.
The Knurl on the Grip is just right for my middle finger, and it is easy to apply force.
The surface finish is also beautiful, and although it is not as good as Nepros, the shine of the Plating is good and satisfies the sense of ownership.
View detail
Is good
The quality and performance are well worth the price.
GEAR is also very easy to use because it is delicate, easy to swing around and easy to apply force even in places where there are no angles.
View detail
The switching lever may be difficult to turn…
I bought the KTCSwivelRatchet because it was the right length.
The total length is 180mm.
Overall, it's good, but Quantity:Pair (for Left and Right) The height of the switching lever is too low to turn it quickly.
It might be a little annoying…
Quantity:I have to turn it like I'm pushing the toes of my 2pc fingers to switch it.
Is it just a matter of getting used to it?
I can turn the Straight SwivelRatchet quickly, though.
However, I haven't used Straight's SwivelRatchet because its length is too short.
View detail
It's a DIY must!
I've been working on this one for quite a while!
It's made by KTC, so you can be sure the thing will work!
It's pretty much Recommendation's tool.
View detail
I thought the cheap ones would suffice.
I was using another cheap Tool, but compared to this one...
The notch is light and has little play, making it easy to tighten in tight spaces.
The Push button on the Socket doesn't stick out, so it doesn't get in the way.
This is the only thing that makes a difference, but it makes a huge difference in workability.
View detail
It comes in handy when you need to loosen up.
[How is it used?
When you loosen it. "Torque to a degree. This is useful in situations where you need to
How was your experience with it?
It is long enough and the handle is easy to grip and gives the impression of being easy to use.
How did it compare to other products?
I'm an amateur worker. It's a good tool. thinking "KTC Products I chose the
[Points to note]
"Not every Bolt & Nut can be loosened. Please pay attention to this.
[ITEMS TO BUY TOGETHER
Hex Socket. And etc. "KTC" The following is a recommendation to align with
It's the amateur workers. "Good tools. I think you should use
View detail
KtcParenthesis good
The insert is Button style and looks high quality. I recommend it. View detail
Easy to use even in hard-to-reach places
This is advantageous in tight spaces, where there is not enough space to turn the Ratchet, and adding Extension to it is a good solution for large areas. I don't use it in places where I need a very strong Torque. View detail
You can use this to loosen hard bolts under 22mm.
Aside from WR250X and R, which are loosened by special big Nut of 27mm, Bolt of 22mm or less is loosened by this. So, I used the large size 12, 7 spinner, ratchet and Torx wrench only for 27mm. View detail
It's my buddy who loosens the Axle Nut.
The WR250X has a high torque of 12.5kg on the rear axle, and the Yamaha has a particularly strong torque on the axle nut. Anyway, as with any other bike, if you have a high torque bolt, use the spinner handlebar to firmly apply pressure to the socket perpendicular to the bolt to remove it, it's easier and you don't have to worry about licking the bolt! View detail
It's only Ratchet, but it's still Ratchet
Do you think a cheap Ratchet is enough? Please use a proper tool once. Don't lick the screw or bolt head, or put the power in a strange direction, and you will end up destroying your car. View detail
It's beyond the price.
The GEAR is also very solidly built and the quality and performance is well worth the price, with a handle that is easy to use and force, even in sensitive and non-angled areas. View detail
Best for Motorcycle maintenance.
I was using a Spinner Handlebar for working on the car which can be used for WheelAxle Nutetc. But I'm a little worried because I use Glasses Wrench to loosen the narrow place where I can't use it. I want to loosen it by using a hexagonal Socket as much as possible. I bought it on impulse after watching a YouTube video that I often watch. It's so comfortable to use - Kyoto Tool! View detail
KTC is a safe bet.
9.I have been using a 5sq. 25?Spinner Handlebar, but I have a Bolt that I can't seem to loosen, so I bought this 40?Spinner Handlebar in 12.7sq.
This is a high quality tool with a Smooth grip, easy to apply force, and no rattle in the docket area.
It's a bit expensive compared to other manufacturers, but considering that it's a tool that will last almost a lifetime, I'd choose KTC for the price difference of about $1,000.
If you're wondering what to do with the tool to loosen the Axle Shaft on your big bike, you can't go wrong with the Handlebar.
View detail
A definite product.
The quality is very good and the performance is perfect. It does a great job of loosening and tightening the well with the fine GEAR, even when there is no angle. I think it is the tool I use most often with a 9.5 slot. View detail
It's cheap and convenient.
It is a very useful and convenient tool that you must have if you have an air compressor. View detail
KTC for peace of mind
When you buy from We-Big, you'll get a discount and points back
I got a great deal on it I use it at work and it's a good product
With this, you can do a whole range of maintenance work
View detail
Easy to use
Purchased for de-installation and removal of the large-textured Hexagon Bolt
The Grip was easy to grip and remove the hard Bolt with ease
I feel that it is a little heavy, but if there is 1 pc, it seems to be convenient afterwards
View detail
Large Easy to use
Familiar with Size being appropriate. It is reliable use feeling. It's safe because Socket will not fall. I am loading in Box in Motorcycle. View detail