Reviews
RokudaboPlug replacement
[How is it used?
Purchased with Plug as it is needed to replace Plug in CBR600RR PC40.
Was the one you received as per Image?
The quality of the plug wrench is good and the magnet in the plug wrench makes it easy to catch the plug.
How was your experience with it?
As a plug wrench, it does its job well and is highly rated for its texture.
However, since this was my first time replacing a 4-cylinder plug, I struggled with replacing #2 and #3 and eventually gave up and asked Motorcycle shop to do it for me.
We were told that a less thicker plug wrench would be more suitable.
I don't know if I will have to come back to it in the future, but it was good as a Plug wrenchSingle Body.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
Light and strong Tool
Expensive, but very light for carrying on rides. Easily put into a tool pack.Easy to adjust, very sturdy. A nice tool. more uses for these tools than just motorcycle riding.It serves two purposes, amateur and professional. It should be in your tool bag.Highly recommened View detail
For Ratchet driver
It is for Impact Driver, but I bought it for Ratchet Driver.
The length is just right and it is inexpensive, so it is very useful.
There is also a half-length No. 3, but I regret that I should have chosen the longer one.
View detail
I use it casually.
I use it for hand-tightening, and for quick ratchet, I use it as a "pusher-pusher".
The plus-ticky part is subtle, but it is a useful product if you have it.
View detail
Exhaust flange, etc.
It is used to remove the exhaust pipe or when the bolt nut is difficult to access due to obstructions, etc.
This is a useful item because there are times when it is not necessary to remove obstacles.
The texture is like KTC!
View detail
Confidence. Reassurance. Aha, overconfidence.
[How is it used?
I feel like I've probably been using it since the YZF-R25, maybe the R6 all along.
R25:Mileage is about over 20,000km
R6:Mileage of about 69,000 km
Of the above, I think I replaced it about 3,000 km and used KN-204 about once every 2 times, and I think I used KN-204 about 5 times out of the 2, so I probably used it roughly 10 times to attach and detach it.
Was the one you received as per Image?
It comes in a Simple box and the product is as per Image.
BlueWhite shining Gold, but not Gold like tools with a Gold feel mixed in.
How was your experience with it?
A sense of security because the tools are from a well-known manufacturer.
Oil filter used for connection and disconnection
1．YAMAHA OEM5GH-13440-50：https://www.webike.net/sd/25727395/Initial installation and one time thereafter
2．KIJIMA 105-833：https://www.webike.net/sd/20386956/Unless otherwise noted, all are here.
3.Vesrah I don't remember what it is, but I remember using it once.
Not a wide vehicle in Space, but can be used by fitting tightly into the Filter
I used it with a 9.5sq Ratchet and it didn't come off.
I'm not sure if it's a little forward or a little oblique, but it's a little good.:I tried to remove the Filter while it was still set and licked it to a large. 。 It is a solid tool, but it cannot be handled carelessly because of overconfidence.
[Points to note]
As mentioned above, even a good tool will fail if handled carelessly.
How did it compare to other products?
・KN-204：https://www.webike.net/sd/19861663/Although this is not a pure tool comparison, KN-204 is easier in terms of attaching and detaching filters. In terms of price, the KN-204 is the better choice for long-term use, and it is the only product that can handle with MagnetFilter.
It is a product of a well-known manufacturer, which makes maintenance fun just by owning it. The weight of the product also gives the impression of solidity. However, it does not allow for improper use, so I feel that it will lead to careful maintenance of my car.
View detail
Having trouble finding a use for it?
[How is it used?
I have been wanting to get a Gold Brush for a long time, as the tooth brushes are too yucky and useless for removing persistent dirt, rust, etc. I have been looking for a Gold Brush for a long time.
I bought it as a trial because it was inexpensive for KTC.
Was the one you received as per Image?
I thought it would be about one size larger than Tooth Brush, but it was much larger than I imagined.
The wooden handle is a cheap-looking material with a reasonable price tag and does not seem to be very durable.
How was your experience with it?
I bought Gold Brush for the first time, and the brushed part is softer than I imagined, and it seems to be scratch-resistant, but it cannot scrape off dirt as hard as I would like.
However, since it is a Gold Brush, I am not sure to what extent it will not scratch the surface.
[Points to note]
For a tool novice like me, it would be good to buy tools with the feeling that they are useful once in a while if you have them.
Do not expect too much (laughs).
In addition, since different materials have different uses, it is important to find out in advance what you want to use the material for and what it is suited for.
View detail
It is heavy and goes easily into the Screw hole.
I had an Allen Wrench made by a manufacturer at home for a long time, but it had rust on it extensively and the hexagonal screw was going to be damaged every time I used it on my motorcycle because of the sharp hexagonal point on the end of it.
[How is it used?
Various sizes of hex bars are available in Quantities:The set is widely compatible with Motorcycle's hexagon socket screws.
Was the one you received as per Image?
It has a high quality feel as shown in the image and looks scratch resistant due to its dull luster.
How was your experience with it?
There is almost no rattling even if the screw is moved after insertion, and it seems that the screw hole will not be violated. There is also a ball point on the screw that allows for quick turning of the screw once loosened.
[Points to note]
As mentioned in the manufacturer's note, it is better not to use it on the ball point where high torque is applied. When using it, it is recommended to use it for fast turning instead of tightening the screw.
How did it compare to other products?
Compared to the non-Manufacturer products we have had in our house for a long time, the precision, weight, and ease of use of these products are all far superior.
Although the regular Allen Wrench without ball point is also available, we recommend this product because it is more convenient and can be turned quickly, even if you have to spend a little more money.
View detail
Castings, good stuff (cold! (Gobble!)
I was heartbroken by the DAYTONA product, so I hung on to KTC.
Although the company is an expensive Image, we were able to purchase the product at a reasonable price, perhaps benefiting from the Large volume production.
The DAYTONA-made steel plates were thin and expanded when Torque was applied, but the KTC-made plates were made of heavy cast metal.
It fit tightly into the OEMFilter and loosened easily.
I had a terrible prejudice against cast metal as cheap, but my view has changed 180 degrees.
Quality and Rigidity. Come to think of it, Wheel was Casting too....
View detail
Unusual thin Combination wrench
This is a thin Combination wrench from KTC, the Japanese Standard for tools.
As the name suggests, it is MAJORItems for bicyclists, and Amaz*n or something like that, there are a lot of reviews that seem to be cyclist-list.
Basically, it is a Spanner that can access areas that are too thick for normal Spanner to access.
It was 10mm wide on two sides and the thickness of the Spanner section was 3mm.
Generally, this type of thin-walled item is simply lineuped as a Spanner, but this product is a Combination wrench.
Note that the Glasses side is not thin-lipped.
For this reason, I think it is not impossible to use it as an alternative to the normal Combination wrench if you pay attention to the concerns when using it on high Torque areas.
Also, many Thin Open Wrenches have a rough finish due to the base punched out of the plate gold, but this product, as one would expect from KTC, has a normal finish on the spanner section. It is not particularly excellent, but it is not bad at all.
The only thing that I personally think is not good enough, although it is just a preference, is the design of the cherry blossoms.
It doesn't make any functional sense. (It's more likely that dirt will accumulate in the hollows.) I was not attracted to Design.
I want my tools to have functional beauty. It is completely my personal taste.
It is a rare combination wrench as a Thin Open Wrench, so it is the best candidate if you are particular about Glasses.
It is also a product that can be recommended in general because it is definitely a thing.
View detail
Solid Filter wrench
Used in GSX-R1000R 2019
Size66.5 corresponds to SEA BASSOEM's Cup type Oil filter.
SEA BASS cars, in general, have oil filters that are specified to be tightened stiffly.
It is 720 degrees from seating, not Torque indication.
If you use a filter wrench that is not accurate enough, you will get a "slippery" result.
Once it is wet, it is no longer good.
You will have to struggle to remove it with that kind of parpray.
I have been using SEA BASSOEM's Filter wrench for about 8 years now.
Some overuse over the years. (?) I guess my addiction has become too much for me, but the other day I finally got it.
When it came to removing the naff Oil Filter, it was a Large strange thought.
So, we purchased this product instead.
Compared to SEA BASSOEM, the range of the surface is deeper, or perhaps the Fit feeling when fitted to the Filter is better here.
The thickness of the wrench is also thicker, and the inner shape is more precise, so I think it will last longer.
Note that the hexagonal part that pops out has a two-sided width of 24mm and SEA BASSOEM (17mm) The size is considerably larger than the
Basically, the drain bolt on SEA BASS cars is 17mm wide on two sides, so the OEM product is very easy to work with in terms of its wrench.
However, this product is not exclusive to SEA BASS, so it cannot be helped.
Ratchetetc. will require ridiculously large Glasses when used with models that are strictly height-oriented, so be prepared for that.
If not, a 9.5sq Ratchet can be used.
In addition, it is necessary to carefully examine the oil filter to be used and to observe the torque for tightening.
The wide range of size lineups makes it a good choice for those who want a filter wrench.
View detail
You could have at least one.
I thought that all Ratchet Handlebars are not that great, but KTC's Ratchet moves smoothly.
I would say it has more of a muffled or muffled feeling.
I bought it because I thought the quality was worth the price and that I could have at least one in this price range, and I'm glad I did.
I knew that Home center tools are different from a good brand. (Don't mention that they are sold at Home center, too...)
View detail
Convenient for Oil replacement
It is helpful in tight places such as Oil change.
The feed angle is small, and the machine is well made and highly accurate, so it can be tightened tightly.
Compact and thin, it can be used for the same purposes as ordinary Glasses.
View detail
KTC Slotted screwdriver
It felt good in my grip and I was able to apply force well.
I was able to successfully remove the screw that I could not remove using a cheap tool.
View detail
It is a useful tool when one is in a tool box. Quality is also a problem pear if it is KTC!!
It is a useful tool when one is in a tool box.
Quality is also a problem pear if it is KTC!!
View detail
It is found useful in the place into which it does not go in a narrow place straight with a ball point.
It is found useful in the place into which it does not go in a narrow place straight with a ball point. View detail
Six KTC spanner set. There is only KTC and a thing is good.
Six KTC spanner set.
There is only KTC and a thing is good.
View detail
Tiny and cute.
I bought it thinking I would eventually use it.
Good to use, easy to turn with moderate resistance.
View detail
At the back of the toolbox.
This one is always in the back of the tool box. w
I don't get a chance to use it very often, but it is in the back of my tool box, wondering when I will use it.
The handle is easy to use and easy to apply force.
View detail