Reviews
Cushioning Outclassing for easier maintenance
I happened to see this product mentioned in an article when I wanted to do something about kneeling or sitting straight on the floor when servicing the lower part of the vehicle body, such as the Engine underbody and undercarriage at Garage.
I bought it because I liked the way the matte was thick and yet compact when folded.
When I used it, it was as easy to use as I expected, and I could kneel and lie down, as well as sit on the folded part to do maintenance work in a really comfortable position.
The cushioning of the thick matte is also comfortable, so much so that I wonder if this could be used as a matte for overnight stays in the car. I think it could be used as a matte for overnight stay in a car.
Considering all the groundwork I have had to do, I wish I had used this product earlier.
View detail
I feel the threshold is not beginner friendly w Is it a tool for PRO?
[How is it used?
Currently in use, rarely used since it only comes into play when Chain is exchanged.
Was the one you received as per Image?
Image is correct. It has a sense of quality and rigidity.
How was your experience with it?
The Grip is easy to hold, the movement of the Outer and InnerBolt is smooth, there is no stress, and the accuracy is high.
Various Product Contents are made into attachments in order to be used for Chain size correspondence, Cut, and Crimp, and it is easy to use the point that the O-ring is attached to the attachment and the dropout prevention measure is given. Moreover, it is devised in the shape that can be checked so that it may not be tightened too much in the press fitting of the joint plate.
When crimping the Link Plate, there is no need to prepare any other tools by using the attached Handlebar, and I like the fact that it suppresses the input of an overly large Torque. This is an excellent tool that has a lot of ingenuity and can cut and crimp reliably.
There are some disappointing points such as the price, the surface coating peels off on the powder and sticks to your hand when you use it for the first time, the instruction manual does not specify the amount of crimp, and only the illustration of the crimp shape and notes are written.
[Points to note]
If you are not sure how much to crimp, we recommend you to check the specified value of ChainManufacturer.
The instruction manual instructed to use 52 press-fit plates for 525 size, but I used 50 press-fit plates (530 size) because I could not use them with DID 525ZVM-X which I replaced this time.
How did it compare to other products?
We compared the DID Chain tool, which has a low price and a good reputation, but we chose a reliable and first-class tool manufacturer because of its ease of use and the fact that the chain is an important security component.
Other items that would be helpful
Opinions and requests to Manufacturer:I would like to see the Crimp amount (diameter) for each Chain size listed in the Instruction Manual or on the web.
View detail
It is useful for panel polishing.
It can be used on almost any vehicle and is very useful for polishing the tailgate, as it allows the tailgate to be opened at an angle, making it easy to check the condition of the paint and to turn the polisher. View detail
It is easy to remove and hard to damage.
Convenient for removing the drainage molding. When painting, the drainage braid must be removed or replaced as the BALI will come out. The Grip is easy to handle and the tip is easy to hang on, so you can remove the drainage braid without damaging it. View detail
Improving work efficiency
This is a must-have tool for overhauling the Brake Caliper and it is effective for removing the Seal of the Caliper. View detail
Versatile for removing seals
I bought the Brake Caliper Seal to pry out of it, but it didn't work for that purpose.
This is because the blade is surprisingly thick and does not catch Seal easily.
However, it can be used for other purposes, such as removing the O-ring, and it is definitely a reliable tool to have.
View detail
It has excellent Cushion properties.
It can be used as a kneeling board when working in a low position or as a sleeping board when crawling underneath. It can be folded up into a Compact for easy transportation. It is very useful if you have one in your workshop. View detail
You can use it in many ways.
Foldable CushionMatte can be used as a sleeping board if it is unfolded, or it can be folded to become a chair. It's very useful for kneeling or low maintenance and doesn't take up much space. View detail
Perfect for garage maintenance.
Motorcycle maintenance is often done in a low position, so I have to kneel down. With this product, I don't have to worry about dirt on my clothes. You can put power into your knees even if you are in an unreasonable posture. View detail
good
Even cheap ones were able to successfully remove Fluid. Brake hose Fluid injection after replacement, bleeding takes a while, but it has been done. View detail
I used it for Fluid injection
I used Brake fluid to pour into reservoir tank and put Fluid from Caliper's Bleeder Bolt.
Since the attached Tube is short, I think that it can be used a lot if there is a longer Tube.
I think that you can use many other things if you have one.
View detail
It is only a Syringe (injector) in three-point Set ? of a goods photograph.If Colet has, the part which is only a Pumping of the Lever and as for which a grade returns can be compulsorily sucked out in the case of exchange of a Fluid.Bring to tim
It is only a Syringe (injector) in three-point Set ? of a goods photograph.If Colet has, the part which is only a Pumping of the
Lever and as for which a grade returns can be compulsorily sucked out in the case of exchange of a Fluid.Bring to
time reduction.
exhaust air omission work not only becomes easy ordinarily, but sends back towards a Master cylinder from
bottom, it fills a Fluid (exhaust air escapes easily upwards), and also has a Merit of being able to restore a Brake line to
comfort. one bought one more for fine adjustment of the Fork oil.There is how to use many things for
etc., that is right, and it may buy and place up to three flat knots, and there may be no loss.
View detail
It is used for Fluid exchange of Ninja250R.Since the injector possessed before was smallish and there was little quantity of the Fluid which can be attracted at once, it purchases also here in passing at the time of this Maintenance-set purchase.
It is used for Fluid exchange of Ninja250R.Since the injector possessed before
was smallish and there was little quantity of the Fluid which can be attracted at once, it purchases also here in passing at the time of this Maintenance-set purchase.
There were many amounts of Fluids which are actually used, and can be once attracted by Stroke since there is much ??
Cylinder capacity, and exhaust air omission work also progressed.
Although it inserted in the Nipple since the attached Hose was more elastic than a general thing again, it has equipped firmly, without separating by pressure.Since the
price is also cheap and easy-to-use, it is very an agreeable impression.
View detail
[Webike Monitor] It is purchase in order to extract Brake-fluid exchange and an old Oil. It is a free injector. Although I think that it is convenience ?? to extract, I think ... with the price not being a little cheaper.
[Webike Monitor] It is purchase in order to extract
Brake-fluid exchange and an old Oil.
It is a free injector.
Although I think that it is convenience ?? to extract, I think ... with the
price not being a little cheaper.
View detail
Such an easy-to-use Tool like this is not in attachment and detachment of the Dust-seal Oil seal of a Caliper.It is the ease of use of taking its hat off.R form at the tip of , thickness, the die length of a Shank, etc. are optimized by the above
Such an easy-to-use Tool like this is not in attachment and detachment of the Dust-seal Oil seal of a Caliper.It is the ease of use of taking its hat off.R form at the tip of
, thickness, the die length of a Shank, etc. are optimized by the above-mentioned work.Especially finishing at a tip is good and difficult to damage a cylinder wall and a Groove.moreover, a Rubber is damaged to Boots attachment and detachment of a Master-cylinder Cup in addition to the Dust seal of a Caliper -- it can work, feeling easy reliable.
Although there is also turn of the more sharp Pick tool, it is a Tool to have in maintenance of the circumference of a Brake one very much.
View detail
Although the product of the other manufacturer of off-road system was used before, since it was broken when used several times, I replaced. Good point: Among tools, it is a famous manufacturer. Supply of components etc. are easy. Structure is solid and it
Although the product of the other manufacturer of off-road system was used before, since it was broken when used several times, I replaced. Good point: Among tools, it is a famous manufacturer. Supply of components etc. are easy. Structure is solid and it is safe. If it gets used, I think that it is easy-to-use. (I'm not used yet) Bad: The frequency in use of 1 time a year and privater are considered, it is a little expensive. I cope with a description until I get used. View detail