Reviews
Very handy to have.
If you don't know, you'll think it's a slotted screwdriver with a worn out tip.
The price of this will surprise you if you don't know what it is.
But it's so good.
It can be used without damaging the seal or its surroundings.
It feels so good, like a lie.
Reliability from an overwhelming sense of security.
It's true.
View detail
Used to sleep with High ace
I bought the Long one, which I use for hot summer nights when I need to keep it open a bit.
It's just right, or maybe I'd like to open it up a bit more.
I think Short would only open it a little bit much.
The price is too high for me for the frequency of use, so it's not a good cosmetic product. The texture is KTC.
View detail
Use different sizes for different tasks
Purchased at the same time as the Mechanic Matt from the same KTC
I purchased this product with the intention of working on my knees
It is just the right size for kneeling as shown in the picture It is also possible to sit on it, although it is a little small
You can easily change the Wheel of Car
The material is the BEET board itself, so it is thick enough that it can be used on uneven ground It is
I thought the Mechanic Matt would be better for working from the hip
Also, even if it's not as large as the Mechanic Matt, it's still a bit larger than the It's out of DAYTONA if the "MaintenanceMatte is Recommendation
View detail
Active in the narrow Garage
This would be so handy for a DIY maintenance job!
In the past, I've been working in the middle of the room or sitting on the ground with Dustcloth on the ground
I've been interested in this product for a while, but was hesitant to buy it because of the price tag Thanks to the points I've saved and Corona, I can't go out at all to GW for maintenance Purchase
It's very convenient to use
1.It doesn't hurt to sit on the ground
2.The length allows you to work on some areas without moving the Matte
3.It can be folded, and (Naturally it is) The front side is always clean because the front side does not make contact with the back side when it is folded
4.I can work from a low position lying down
Material is the old-fashioned BEET board itself
It's a little annoying that the part that folds up is also the same material, so I feel like it's going to be shredded sooner or later Where
It is a Recommendation to the person sitting on the ground working
View detail
good
Even cheap ones were able to successfully remove Fluid. Brake hose Fluid injection after replacement, bleeding takes a while, but it has been done. View detail
Drip prevention
Brake fluid is melted when it hangs on Tank or Body ... I do not want to be such a thing! Purchase to safely remove Fluid solution. Because it is a syringe, it is really easy to extract the Fluid solution. And I think that it is a product that plays a role in extracting Fluid solution troublesome. View detail
This is superb
Repair Parts of the previous MODEL will not appear and it is a substitute.
First of all, it is overwhelmingly different that Plate's press-fitting has become easier.
Former MODEL was difficult because Plate was easy to fall, but the fall with Z guide. Also devised to prevent excessive press fitting.
CutPin which was heavily damaged in the previous MODEL has been changed from the Screw expression to the insertion formula, and the Trouble that breaks from the root is gone.
Crimp pin also changes to a special shape thing, it is devised that it is not too much Crimp.
Anyway it's easy to use. Super Recommendation.
But Neck is price.
Although I am frequently used, there is no problem, but the general one is too expensive to buy.
I would like to lower the price as much as possible, apart from 60 series Parts.
View detail
It is only a syringe
Although it seems that various images are attached, the quotient ProductNo : ABX7 - S1 is only syringe.
I used it to exchange Fluid.
There is a possibility that you may swallow when you suck Hose,
It's safe, is not it? W
The price is as expected KTC. It is quite easy..
It seems to be long, so I am 3..
View detail
I think Cospa is good.
I think Cost performance is good.
Hose may be a bit longer to use.
I have not used a syringe to date
I tried it on a trial.
View detail
I used it for Fluid injection
I used Brake fluid to pour into reservoir tank and put Fluid from Caliper's Bleeder Bolt.
Since the attached Tube is short, I think that it can be used a lot if there is a longer Tube.
I think that you can use many other things if you have one.
View detail
I am handy ♪
I bought it because it can store small parts that are deeply received and will not catch on Magnet. Actually using it, it is very helpful to keep parts not sticking. Color is also beautiful Red so it looks nice. View detail
I am handy ♪
If you do not use it by multiplying Width of commonly used Size, we will fold the Holder part and it will not get in the way. There is KTCLogo which looks great and it is cool. It is very useful. View detail
It is only a Syringe (injector) in three-point Set ? of a goods photograph.If Colet has, the part which is only a Pumping of the Lever and as for which a grade returns can be compulsorily sucked out in the case of exchange of a Fluid.Bring to tim
It is only a Syringe (injector) in three-point Set ? of a goods photograph.If Colet has, the part which is only a Pumping of the
Lever and as for which a grade returns can be compulsorily sucked out in the case of exchange of a Fluid.Bring to
time reduction.
exhaust air omission work not only becomes easy ordinarily, but sends back towards a Master cylinder from
bottom, it fills a Fluid (exhaust air escapes easily upwards), and also has a Merit of being able to restore a Brake line to
comfort. one bought one more for fine adjustment of the Fork oil.There is how to use many things for
etc., that is right, and it may buy and place up to three flat knots, and there may be no loss.
View detail
It is used for Fluid exchange of Ninja250R.Since the injector possessed before was smallish and there was little quantity of the Fluid which can be attracted at once, it purchases also here in passing at the time of this Maintenance-set purchase.
It is used for Fluid exchange of Ninja250R.Since the injector possessed before
was smallish and there was little quantity of the Fluid which can be attracted at once, it purchases also here in passing at the time of this Maintenance-set purchase.
There were many amounts of Fluids which are actually used, and can be once attracted by Stroke since there is much ??
Cylinder capacity, and exhaust air omission work also progressed.
Although it inserted in the Nipple since the attached Hose was more elastic than a general thing again, it has equipped firmly, without separating by pressure.Since the
price is also cheap and easy-to-use, it is very an agreeable impression.
View detail
[Webike Monitor] It is purchase in order to extract Brake-fluid exchange and an old Oil. It is a free injector. Although I think that it is convenience ?? to extract, I think ... with the price not being a little cheaper.
[Webike Monitor] It is purchase in order to extract
Brake-fluid exchange and an old Oil.
It is a free injector.
Although I think that it is convenience ?? to extract, I think ... with the
price not being a little cheaper.
View detail
As compared with the former MODEL, it is very easy-to-use. -- a cheap tool -- since [, such as a system, ] it is high -- with few Crimp mistakes -- since there is a Repair parts finely, it is found useful. Although DIY can be carried
As compared with the former MODEL, it is very easy-to-use.
-- a cheap tool -- since [, such as a system, ] it is high --
with few Crimp mistakes -- since there is a Repair parts finely, it is found useful.
Although DIY can be carried out, origin is not taken by one Motorcycle (being too expensive).
View detail
Such an easy-to-use Tool like this is not in attachment and detachment of the Dust-seal Oil seal of a Caliper.It is the ease of use of taking its hat off.R form at the tip of , thickness, the die length of a Shank, etc. are optimized by the above
Such an easy-to-use Tool like this is not in attachment and detachment of the Dust-seal Oil seal of a Caliper.It is the ease of use of taking its hat off.R form at the tip of
, thickness, the die length of a Shank, etc. are optimized by the above-mentioned work.Especially finishing at a tip is good and difficult to damage a cylinder wall and a Groove.moreover, a Rubber is damaged to Boots attachment and detachment of a Master-cylinder Cup in addition to the Dust seal of a Caliper -- it can work, feeling easy reliable.
Although there is also turn of the more sharp Pick tool, it is a Tool to have in maintenance of the circumference of a Brake one very much.
View detail
Although the product of the other manufacturer of off-road system was used before, since it was broken when used several times, I replaced. Good point: Among tools, it is a famous manufacturer. Supply of components etc. are easy. Structure is solid and it
Although the product of the other manufacturer of off-road system was used before, since it was broken when used several times, I replaced. Good point: Among tools, it is a famous manufacturer. Supply of components etc. are easy. Structure is solid and it is safe. If it gets used, I think that it is easy-to-use. (I'm not used yet) Bad: The frequency in use of 1 time a year and privater are considered, it is a little expensive. I cope with a description until I get used. View detail
The bottom is Mr. KTC truly in structure firmly anyhow in a user friendly manner.
The bottom is Mr. KTC truly in structure firmly anyhow in a user friendly manner. View detail