Reviews
Thin and easy to use.
I used to use Home center, but this KTC is thin and easy to use. View detail
Easy to use and safe
I have used various Tire Lever and the handle and tip spatula are just right in bend and thickness.
Surprisingly, some large handles can cause palm pain, but this is a safe and easy-to-use product.
View detail
Keep one for now.
Easy to use, Basic and one of a kind Items to have.
It is as easy to use as DRC's heavy Tire Lever, KITACO's regular Tire Lever, and a domestic Tire Lever with a smooth tip whose name I forget.
View detail
I feel the threshold is not beginner friendly w Is it a tool for PRO?
[How is it used?
Currently in use, rarely used since it only comes into play when Chain is exchanged.
Was the one you received as per Image?
Image is correct. It has a sense of quality and rigidity.
How was your experience with it?
The Grip is easy to hold, the movement of the Outer and InnerBolt is smooth, there is no stress, and the accuracy is high.
Various Product Contents are made into attachments in order to be used for Chain size correspondence, Cut, and Crimp, and it is easy to use the point that the O-ring is attached to the attachment and the dropout prevention measure is given. Moreover, it is devised in the shape that can be checked so that it may not be tightened too much in the press fitting of the joint plate.
When crimping the Link Plate, there is no need to prepare any other tools by using the attached Handlebar, and I like the fact that it suppresses the input of an overly large Torque. This is an excellent tool that has a lot of ingenuity and can cut and crimp reliably.
There are some disappointing points such as the price, the surface coating peels off on the powder and sticks to your hand when you use it for the first time, the instruction manual does not specify the amount of crimp, and only the illustration of the crimp shape and notes are written.
[Points to note]
If you are not sure how much to crimp, we recommend you to check the specified value of ChainManufacturer.
The instruction manual instructed to use 52 press-fit plates for 525 size, but I used 50 press-fit plates (530 size) because I could not use them with DID 525ZVM-X which I replaced this time.
How did it compare to other products?
We compared the DID Chain tool, which has a low price and a good reputation, but we chose a reliable and first-class tool manufacturer because of its ease of use and the fact that the chain is an important security component.
Other items that would be helpful
Opinions and requests to Manufacturer:I would like to see the Crimp amount (diameter) for each Chain size listed in the Instruction Manual or on the web.
View detail
The best Tire Lever I've ever had!
First of all, the ease of use is the best compared to the Tire Lever I've had
It was easy to get into the gap between the rims, and when I put the Tire in after it was replaced, it went in without difficulty
I only bought 1 pc as a trial, so next time I order, I'll be able to get more Quantity:I would like to have about 2pc
The one drawback is the high price I don't know if it's cheaper in terms of TotalCost without just canning the tube and making it puncture Okay?
View detail
One of the easiest levers to use
At first we used a cheap Tire Lever from Straight and Daytona etc I was there, but Race's seniors and friends at the supply store
I bought TSK and this KTC Lever after hearing about it from
It is true that the tip is thinner than that of the less expensive competitors, but the strength is also ensured, and this thinness, shape and Grip's Thanks to this, it became easy to work on the Large change
View detail
It is easy to use
I bought this forged Tire Lever because the tip of the Chinese Tire Lever purchased in the jungle broke The thickness and shape of the tip are exquisite and the feeling of use is also good View detail
It became easier to work
As others say differently, the tip of Lever is thinning. Therefore, it can be placed in a narrow gap, making the work very easy. The thickness of the tip is about 1 mm slightly. What I have from the past is 2 mm. It is nearly half the thinness. Quantity : I bought 2 pc, but I thought that I can buy another pc.
View detail
Lightweight, Compact, somewhat usable
Basically it is not a stationary tool but a carrying tool.
Light, short, flat shape so it's bulky.
The performance as a key Tire Lever is not compatible with a thin Spoon type.
Compared to that, it is still short, so I need power, somewhat thick dish surface is difficult to hook and hard to turn.
However, it can be used normally. Maintenance is easy as well as rugged because it has a simple shape without a grip portion etc..
It is a Material of smooth texture, but it does not slip even with oil, so that point is safe.
However, since there is not much smoothness, careful work will scratch the Rim and be afraid to attach the Wound so be careful.
It was not bone but quality was like good atmosphere that I wanted to touch without any meaning.
However, if you are using at home, if it's Main, we recommend a thin SpoonType with Grip with long handle, you can hold it firmly.
View detail
Since the Tire lever of a DAYTONA had dissatisfaction a little, it purchases as a Tire lever to three flat knots. The photographs are a DAYTONA Long tire lever from a top, a DAYTONA Tire lever, and KTC260. It is easy to put in the tip of KTC260
Since the Tire lever of a DAYTONA had dissatisfaction a little, it purchases as a Tire lever to three flat knots.
The
photographs are a DAYTONA Long tire lever from a top, a DAYTONA Tire lever, and KTC260.
It is easy to put in the tip of
KTC260 between a rim and a Tire most thinly.
Although individual user-friendliness tends to put in a DAYTONA Long tire lever and KTC260 equally, when using the Lever after it, a DAYTONA Long tire lever is easy-to-use.
It is although this is unavoidable since it is a problem of die length.
View detail
As what is called a Spoon Type of a Tire lever, it is a time-tested product.It is more convenient for there to be two in Tire clearing work.Although there is also a cheap imitation these days [ ], this product is clearly a little superior well [
As what is called a Spoon Type of a Tire lever, it is a time-tested product.It is more convenient for there to be two in Tire clearing work.Although there is also a cheap imitation these days [
], this product is clearly a little superior well [ of tip form (condition of thinness and an R), and Plating finishing ].Although it cannot say truly that he has no Rim protector, it is easy to insert and difficult to give a crack.The Rubber grip of a Lever end is also kind to a hand.Since
die length is 260 mm, it may not go to the reason for calling it omnipotent, but the turn of the 500 mm of last Class may surely come, but general work is managed satisfactorily.
View detail
Although the product of the other manufacturer of off-road system was used before, since it was broken when used several times, I replaced. Good point: Among tools, it is a famous manufacturer. Supply of components etc. are easy. Structure is solid and it
Although the product of the other manufacturer of off-road system was used before, since it was broken when used several times, I replaced. Good point: Among tools, it is a famous manufacturer. Supply of components etc. are easy. Structure is solid and it is safe. If it gets used, I think that it is easy-to-use. (I'm not used yet) Bad: The frequency in use of 1 time a year and privater are considered, it is a little expensive. I cope with a description until I get used. View detail
Three kinds of tire levers were prepared by this tire change. One of them is this KTC tire lever 260. Friction with the wheel at the time of exchange did not peel off surface plating treatment, either. Moreover, since the surface is carrying o
Three kinds of tire levers were prepared by this tire change.
One of them is this KTC tire lever 260.
Friction with the wheel at the time of exchange did not peel off surface plating treatment, either.
Moreover, since the surface is carrying out the vine vine, there is an effect of beat wax, and it was easy to do work, and felt.
Although the tip is processed thinly, even the sign of bending is not felt in this work.
A good tool is user-friendly! He admired.
I think that it is a tool I want just the person unfamiliar to a tire change to use.
Although it is a little expensive, tool helps work. He has such a feeling.
View detail
Since it suffered troubles although the last tire change was working by the tire lever and slotted screwdriver of the daytona, it purchased this tire lever. Although the form of die length or the point is almost the same as the product made from a day
Since it suffered troubles although the last tire change was working by the tire lever and slotted screwdriver of the daytona, it purchased this tire lever.
Although the form of die length or the point is almost the same as the product made from a daytona, surface plating treatment has that smooth in the direction of this lever.
Since it does not feel rough, it seems to be gentle to a tire.
It will be easy to work if there are two.
View detail