Reviews
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Satisfied considering the price.
[How is it used?
I bought this to replace a Grip that had been falling apart since purchase.
The vehicle itself is still in Restore, but my hands were getting black every time I touched the Grip, so I decided to use this inexpensive product for now.
Was the one you received as per Image?
As you can see in the photo, it is only packaged in a Vinyl bag, but this is sufficient for Net mail order sales.
Was the installation difficult?
The work of replacing the grip itself is not particularly noteworthy compared to other grips.
If I may say so, I felt that the Throttle side was slightly looser than dominoGripetc.
Grip bond is used in conjunction with Grip bond, so there is no possibility of exiting.
How was your experience with it?
It is still before driving on public roads, but I am still a little concerned about the floating with the Throttle cone on the Throttle side.
Wiring might solve the problem, but I don't have it on hand, so I'll give up.
Well, I am satisfied with the price.
[Included Parts:were they on?
This is the only product. Grip bondetc. must be prepared separately.
[Was there anything that disappointed you?
Well, is this how it is? I think.
I am satisfied with the Fit of the Clutch Side, although the Throttle side is a bit of an issue.
【Review】
Although there may be some vehicle compatibility, the Throttle side is somewhat uncomfortable.
The price of the product is probably fair, but considering the price, it is probably acceptable.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Fluffy feeling is good
Used on XG250 TRICKER, replaced OEM after less than 20 years of use.
This was my first Grip replacement job, but it went easily.
The firmer grip is more comfortable than OEM.
I felt that it was not as effective in reducing vibration as I expected.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
How nice
It is a little thicker than I like. The length is short and it is easy to control the AxelControl.
The name is included for installation.
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
RossiGrip?
[How is it used?
I changed it for Enduro race with SEROW225.
How was your experience with it?
The RossiGrip is famous in the on road world (although it's a Honda OEM grip).
Is it the same shape as It is the Grip of the laugh.
Because of the price, I feel like I could replace it every month.
How did it compare to other products?
The real thing still looks cheap, but it looks like RossiGrip itself lol.
I don't think it's that bad, but it's pretty soft.
[Points to note]
It's cheap, so don't hesitate to use it and replace it.
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
If you are looking for a slightly thicker Grip, this is the one for you!
The design is very good and I like it. one pointYou can choose the color of your motorcycle.
To install, simply remove the original Grip, put on the Bond, spray with Parts cleaner, and screw in. It is not too hard or too soft, so you can install it smoothly.
The reason I chose this Grip was because my previous Grip sometimes made my hands numb from the vibration, so I decided to replace it to try it out. As for the impression that I tried to use it, there is no Direct feeling in Axel from the thickness. It is a mellow feeling. Because the grip is hard, it is not a strange feeling, but there was a little uncomfortable feeling at first. The vibration to the hand was about the same. If you are looking for a slightly thicker Grip, I recommend it.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
I like the way it's biting.
Used for XELVIS.
Universalism is high because of the general inner diameter.
The design is not often seen, but it is thick and soft and comfortable to grip.
It's also non-slip, so you won't get tired even if you hold it for a long time.
If you like the design, you should buy it.
View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
For Japan Model 5 CYGNUS
The downside is that it's a bit long and needs to be cut
If we had a choice of lengths..
The difference in thickness is obvious as the KITACO RACING GRIP was replaced by the KITACO RACING GRIP Absorption seems to have increased considerably
View detail
grip
I like the feel of the Sponge's unique grip, and it absorbs vibrations and shocks!
Because the Grip is a bit tough, when you install it on a SmallScooter etc The Grip may look like it's floating
I wore it on American before and it looked and felt perfect!
It sucks when it rains
View detail
Soft texture
We're replacing the normal grip!
The normal grip was hard and thin
This Grip has just the right amount of Cushion to make the grip more comfortable!
The grip width is thicker and easier to grip in my opinion
It was harder to install and remove than the Rubber
View detail
สวยงามวัสดุดูดีเหมาะสมกับราคา
สวยงามวัสดุดูดีเหมาะสมกับราคาผิวสัมผัสนุ่มสบายมือ สั่งของ 20/1/19 ได้รับ 31/1/19 View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
A bit short
I used this grip for the Motorcycle that I was riding in the past, now I am riding a motorcycle, but it is still a bit short.
I do not slide and cospa good so I love you.
Those who care about the gap need a Grip spacer.
View detail
It's neither good nor bad
Although it is an ordinary Handlebar Grip, I think that the feeling of grasp is good. Because it is cheap, I felt Cost performance is also good. After ordering, I noticed that Handlebar End is not a type that is Penetrating, I processed it myself. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Attached to cb 400 sb
Compared with OEM, the diameter is large and it gets easier to grip. Feelingly, it is tough but firm feeling. One star deduction is that where the Axel side's Length is insufficient and a little gap is left. If I wrote it at the beginning, I could prepare a spacer, but after attaching it, the adhesive gets peeled off and it will be redone, so there's a shame.
But, it looks better, and the Accelerator operation got light, so I suppose it was OK.
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Although it is a good Grip, it seems that the wall thickness is a little thin
For Handlebar with diameter 22 mm, Quantity : 2pcs. (for Left and Right) , For Right corresponds to Throttle sleeve so the inside diameter is about 24 mm. Grip inner length is about 125 mm.
Because it is a Rubber integrated type, feeling peeling in hands held by a plurality of Rubber molded products, - There is no turning feeling. In addition, the surface is slippery and easy to operate Grip.
However, it seems that the feeling of grasping was a little slimmer because the wall thickness was slightly thin. Also, I feel that I wanted Cushion and softness for vibration a bit more, but I think that the area around this is a place where evaluation can be divided depending on personal preference.
Still from a very cheap point, it is a good Grip over the price.
View detail
Satisfied with this price
【What made you decide the purchase?】 TODAY 's Grip decided to exchange for curing and sliding.
【How was it actually used?】 The pattern similar to OEM and Rubber gently grips feel very good.
【Was it difficult to install? (Hard parts case)】 Quantity : Pair (for Left and Right) Large dress is also nearly best so removing the old Grip is easier to remove.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Bond puts a small amount on the Grip side and pushes it, it spreads to the whole. If you attach Bond to Handlebar it is easy to protrude.
[Is there anything I was disappointed about?] Nothing in particular.
【Hope for Manufacturer - Please let me know if there are any improvement points】 I want other colors to come out.
【Have you compared items?】 Compared with other company's products and OEM Product. This product was the lowest price in Design near OEM.
[Others] Rubber is soft and easy to install, and Grip feeling is good, but deterioration seems to be early. I think that it is better to exchange immediately as this price deteriorates.
that's all
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Excellent COSPA!
Along with Bar handle of 4stjog, I chose this Grip because I wanted to keep the shape good and cheap by Penetrating formula, but I am satisfied with the goodness of Cost performance attached!
It feels thin but easy to grasp with a feeling softer than jogOEM The standard shape seems easy to fit with any Bar End.
I did not use a special adhesive, but it seems that it got securely.
Also, because OEMThrottle pipe has a step or Decoration Boko for slip prevention, it is thin because it is attached as it is, so it got bogged down and it was possible to install it normally by scraping down the Decoration Boko of Throttle pipe. I think that those who are troublesome to process can be purchased with High Throttle Pipe.
Because it is cheap, I thought that it was a Grip that seems to be able to respond with early Repeat as it gets dirty.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Large satisfied with this price?
NINJA 1000 had a slight vibration, the arms became numb in long distances and I was considering exchanging Normal grip, I saw this Impression of Grip and decided to try it. My hand is Large, the thickness of the Grip that everyone else is exactly good, the micro vibration is suppressed along with the exchange of the Grip end, I would like to repeat this price.
Reduced by one star, because it smells ruby.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Thick
It is used for BMW 1150 RS. From the OEM's Yoreyore Grip, I changed to Domino, it seems to be holding a steel stick as if I was holding it, and my hands hurt in touring use. I bought it because it is a thick Grip. The result has become easier to make a mistake.
I think that it is exactly right for Motorcycle of forward tilted posture type. It will be much easier to walk around. It is not absolute when it comes to Sports use. Grip is natural, but it is quite. I think whether to use a lot for using.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Street Image
Buy OEMGrip because it is breaking. It is not very flashy, but Red at One point is a good feeling.
Although it was slightly long, the Axel side needed processing, but the installation itself had no problem.
As in other people's evaluation, the touch with bare hands is quite good.
There is a little dissatisfaction in making details, but it is not at Level which is worrisome if you consider the price.
View detail
Fits: YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX600, SUZUKI GSX400, SUZUKI GSX250S Katana, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Look nice, good grip, feels good in the hands. BUT they feels little bit cheap. great product for the price. fast shipping. recommended+++
Look nice, good grip, feels good in the hands. BUT they feels little bit cheap. great product for the price. fast shipping. recommended+++ View detail