Reviews
Quantity:Cover Honda vehicles with the OEMSpecial Tool from Set
OEMSpecial Tool so you can service it with confidence! View detail
It is a self-sufficient tool.
These tools are from KOWA, which was the distributor of Honda OEM accessory tools.
(Current OEM accessory tools are not JAPAN)
It is a 6P and 12P Glasses Wrench.
It says HONDA on it, so if you like Honda, you can buy it.
There are plenty of other tools that are cheaper and better.
There is no need to dare to buy this.
It is for Tool Mania.
View detail
A must for Valve clearance
I purchased this for Valve clearance adjustment.
The part requiring Thickness Gauge is essential because it is not possible to measure it with other measuring tools such as Caliperetc.
Kowa Seiki is a company that I had not heard much about, but it is a very long-established tool manufacturer established in 1952, and it seems to be a company that manufactures not hand tools that we ordinary users use, but special tools and equipment that motorcycle and automobile factories install as equipment. It seems to be a company that manufactures not hand tools for us ordinary users, but special tools and equipment that are installed as equipment in motorcycle and automobile factories.
Unlike Dial gauge and Micro meter, Thickness Gauge does not deviate so much.
However, if rusting occurs, the thickness can easily change with rust, so only that point should be noted.
Since it is not a tool that is used so routinely, it is better to store it in Vinyl after use with a rust inhibitor, or if not available, a lubricant smeared all over it.
It has been about 10 years since I purchased it and it still remains rust-free.
View detail
it uses for parts washing -- it is cheap and convenient.
it uses for parts washing -- it is cheap and convenient. View detail
Easy to use
Even the tip of the pliers is elaborately made with an easy-to-hold, non-slip Grip.
Quality is high for the price.
It is useful because it is easy to use for everyone and is a standard type of radio pliers.
View detail
Torque wrench at last!
[How is it used?
I have been tightening the brake disc, caliper, and other important parts by hand for a long time, but I finally purchased a new one.
Was the one you received as per Image?
Yes
How was your experience with it?
You will want to Torque wrench everywhere.
[Points to note]
When storing, store at a lower level than the low value estimate.
Spring, etc., so that Torque settings do not go haywire.
How did it compare to other products?
Compared to KTC and others, the same.
It costs a few thousand dollars and is rarely active, but it is fun to work with. It's safe and you can learn the Torque sensation.
View detail
For Tappet adjustment.
The price and comfort are good. It is easy to rust, so it is good to apply Oil when storing. View detail
Standard shape and easy to use
These Radio pliers are affordable, easy to use and are a classic type for anyone. This is the best radio pliers for beginners to veteran mechanics. View detail
A must have in CVcarburetorRestore
The CVKcarburetor, which is commonly used on kawasaki vehicles, has a press-fit Valve seat and cannot be replaced by the SeatSingle Body.
However, it is too stupid to replace the body just for that purpose, but once the tank is rusted, the motorcycle will be damaged by the rust powder and the seat will be damaged.
I used to cry myself to sleep, but when I found out about this product, it changed my world. It actually polishes well and looks like new.
The hang should be of the right size. The large size will not fit in the valve seat and the small size will hit the slant and distort the seat.
View detail
I purchased it because it is necessary at work.
I bought it in 2016, but now it is double the price - - -
Analog is also used, but initial adjustment from Gauge set is necessary, the fluctuation of the pointer changes according to the adjustment, so doubt arises in accuracy, but Digital has no room to doubt the number unless it treats roughly.
Since I was using it for many years in my old work place, there is no doubt about handling.
The feeling of matching exhaust pressure and Engine sound with the number of revolutions is also Large thing, but equipment is necessary after all at work.
Purchased and correct answer.
View detail
It is easy to ♪
Bolt which I licked a bit with MONKEY before, was able to be removed comfortably.
We reduced the scrap of ☆ by ease of use considering the storage surface.
After all the work is easy if the tools are good.
View detail
To the tool Mania
Simultaneous purchase when Rear suspension is exchanged for Other Company Product.
There is no cheapness, the making is solid and the feeling of use is very good.
There is no use scene after setting Rear suspension (My situation) , I did not like cheesy tools, so I selected this product.
View detail
This price in made in japan.
Purchased for SR 400's Valve clearance. (0 in SR. 1 / 0. Only 15 is necessary)
Japan This price with quality. I feel sorry for my craftsmen.
However, in Web images Quantity : 1 Set of 7pcs. It seems to be, but in fact it is 0. 3 / 0. 04 / 0. 05 / 0. 06 / / 0. 07 / 0. 08 / 0. 1 / 0. 15 / 0. 2 (Stacking order) Quantity of : 1 Set of 9pcs. is.
View detail
Steering stem nutWrench
Stem bearing purchased for replacement, because the service manual tightened Torque was stated, it was found that Torque wrench could be used somehow and found this product.
How to use Torque wrench to Spanner to 90-degrees and tighten it can apply the prescribed Torque.
The product of DAYTONA chose this product also because it is used as Torque wrench impossible and Honda OEM.
Usability was satisfied as I expected but satisfied Stem Nut It was too light as I closed it with Torque, so I adjusted it several times by hand tightening.
Cost performance is a bit bad so we have four stars.
View detail
With this, the sound will be lost.
I used it for GORILLA, MONKEY. Bore upetc. It uses Engine for budding Tappet since we finished the assembly. Thickness Gauge had heard from seniors from old days, but I used the Thickness Gauge that I had been tightened several times with a stingy but I had an affordable KOWA Thickness Gauge So I bought it.
The ease of use of the product is not much different from the previous Thickness Gauge, but I thought it would be better if there was a little more length. Anyway, the price is cheap and it will be saved.
View detail
KOWA Kowa Seiki Analog Vacuum Gauge
I bought it for synchronization adjustment of CB 750 carburetor.
Making details is also easy to use.
However, because there is no exclusive case for exclusive use of expensive tools, I think that those who bought Case can safely store after separately measuring Size.
View detail
It is good to make it for the price. Attention to storage method
Case is also included
I think that there is no problem with accuracy.
This was bad treatment of me
Once it got wet in the rain so let it dry
When folded and kept, it got rust lightly when looking next. I think that drying should be insufficient, rust prevention ingredients flowed, Oil should be applied, etc. I think that I should have taken care..
View detail
Although he had been thinking from before that it wanted, it was not able to plunge from it being expensive.However, purchase since CR carburetor purchase is carried out and it adjusts with attachment.Unless operation is also broken simply and legible, it
Although he had been thinking from before that it wanted, it was not able to plunge from it being expensive.However, purchase since CR carburetor purchase is carried out and it adjusts with attachment.Unless operation is also broken simply and legible, it uses for a long time.It is kind, if it checks and tampers with using it also at
famous Shop and one person has it some between good one.
View detail
since it is an Adjustment Type -- -- -- although it was worried, it is solid and can fully use.Is there only what the maker specifies as the pure tool?
since it is an Adjustment Type -- -- -- although it was worried, it is solid and can fully use.Is there only what the maker specifies as the pure tool? View detail
In individual use, since it does not use frequently, I think that durability is not much unnecessary.We can use it satisfactorily at all and it is recommended.
In individual use, since it does not use frequently, I think that durability is not much unnecessary.We can use it satisfactorily at all and it is recommended. View detail