Reviews
It becomes more KATANA-like.
The OEM screen is small, but if you install YOSHIMURA's WINDArmour, it will improve the parenthesis even more.
The production is also as expected of YOSHIMURA, and is so matched that it would be fine if it were OEM.
I also feel that the wind is not affected by it.
View detail
Reliable Manufacturer
I have installed this screen on a different motorcycle, and it is a good screen in terms of both fitting and quality. View detail
![Windshield [Corsa]](https://img.webike-cdn.net/catalogue/images/82256/CORSA_TS.jpg)
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
ZEROGRAVITY CORSA
I have two of them with Sports touring, but I think Long touring is Sports and CORSA is close by & looks good (lol). View detail
I am very happy with the installation and the effectiveness of Wind Screen!
[Color] I couldn't decide whether to use Smoke or Transparent.
Point of Selection I did not want to change the original image of the Eliminator to a large size by adding the Screen, and I considered the windproof effect of the Screen first and foremost, [Color] I made it a little taller and more transparent than Smoke.
Impressions before and after installation The screen looks very small, and before installation, I had doubts about the windproofing effect, but I experienced a windproofing effect that was larger than expected. Especially when driving at high speeds, the wind that used to hit my body directly became considerably softer, and I feel that stability and fatigue during driving were drastically reduced.
[… So, in a nutshell. I installed it and it was”great” to the best…. This is my current opinion….
Installation work When I purchased the bike, I read the instruction manual on the Internet and initially thought I would install it myself, but as a novice at removing the bikini cowl and headlight, I felt it would be too complicated and I was worried about failure, so I had it installed at a shop. However, I was worried that it would be too difficult for me, a novice, to remove the bikini cowl and headlight, etc., and I was worried that I might fail to do it.
Photo after installation.
Since it is a transparent Screen, I don't think the photo will do it justice, but please take a closer look at it, such as by zooming in Larger. It is not noticeable and you can feel the effect, and I think it looks very nice.
View detail
Fits: KAWASAKI NINJA650R, KAWASAKI ER-6f, KAWASAKI NINJA400R
For NINJA400R
I installed it on my NINJA400R.
It has a solid windproof effect.
The product is well made and I am satisfied with it.
View detail
![Screen [AeroTouring]](https://img.webike-cdn.net/catalogue/images/46705/2331601_TS.JPG)
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R
Zero gravity Screen (AeroTouring)
Wind resistance is easier when driving on the highway. View detail
Perfect for XSR125
Mounted on XSR125
Smoked color is a nice touch!
Good wind protection effect.
Even a headwind will not hit your body and make you less tired.
I would recommend it to anyone who is beginning to think the wind is a bit harsh.
View detail
Item well packed!
Webike is one stop accessories shop for Motorcycle product. Especially the Magical Racing carbon! Ordered a Puig windshield for Gen 3 busa. Very fast shipment and product is authentic. View detail
![Screen [SR Type]](https://img.webike-cdn.net/catalogue/images/30991/007_zerogravity_TS.jpg)
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Screen
I used the OEM screws as they are, but the rubber was too stiff and the removal and installation was too large, so I would recommend getting a screen bolt. View detail
Asahi windshield windproof under repair crow model
"If you are a sports fan, you can enter your favorite sports name in the comments section below. If you are a sports fan, you can enter your favorite product name in the comments section below. It's hard..
This screen is unique and has a good appearance. Also, the picture of a small monkey on the transparent glass is very impressive. It seems to be a very good product as it has the advantage of being equipped with or without a windbreak cover.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
The thick Frame is useful!
Since it is a Small Shield, I wonder how effective the windshield is. However, in my opinion, the Level is better than no Level.
The advantage of the Large is that a Smartphone Holder, DriveRecorder, and Drink Holder can be attached to the thick and sturdy frame, making it possible to configure a cockpit on a motorcycle. Even with all of these things attached, there is no shaking at all.
It's really useful. 。 I'm glad I bought it 。 My Kok Pit is now complete.
View detail
Cool!
I think it is the coolest of all Screen's products.
Easy to install.
Since the Cover area would be left open, I plugged it with thin plastic sheeting from Black.
The windproof effect is about as good as the bottom of the Helmet, so high speeds are now easier.
View detail
UrbanGSParis-Dakarization
It's a standard Custom, Parenthesis is good. I don't know the effect of wind protection yet, but I think there is some because NORMAL is not there. The main thing is the appearance design. View detail
Added photo of the bracket portion of the installation.
I didn't have a picture of the Bracket part of the installation when I posted last time, so I added a picture anyway. Just for reference. View detail
Fits: DUCATI PANIGALE 899, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199
Standard Custom
About 5 cm higher than OEMScreen? It's about 5 cm taller than the OEMScreen, so it's more effective Large on the highway and looks better. I'm not a CircuitUser, but I'm satisfied with Large. View detail
I devised a way to install it.
First, I had installed Endurance's LongShield, but due to my high seat height (176 cm tall, 80 kg), even on ordinary roads, I was exposed to wind on my face and had to drive with my head low and back rounded on the highway in winter.
I saw the feedback from people who have installed it so far on U-Tube and other places, and they had a lot of trouble with it.
So I attached UpperPlate and UnderPlate to the reverse side of the BodyBodyAdjuster with double-sided tape before attaching the ScreenBody, and when I attached the ScreenBody, it took less than 30 minutes. It took me less than 30 minutes to install the ScreenBody.
Even on the highway, the wind does not hit my face at all, and I regret that I should have chosen this Long Screen with Asahi Windshield from the beginning, but I think I will replace it with Endurance in the summer and enjoy it.
View detail
Virago
Nice windshield! It was hard to find it but webike had) Fine quality, installation took some time and efforts... used a hole pincher to make holes in apron. View detail
As expected of MRA.
As expected from MRA, which is also used in MotoGP, the precision is perfect. It took a little bit of effort to re-fit the rubber, but even a beginner should have no problem installing it. View detail
I think this is the only choice at the moment.
I was considering installing a screen and saw that MRA and ODAX had screens for sale. (Since it is stated in the product description that it cannot be used in combination with the genuine USB socket.) However, the installation stay was different from the picture of the person who installed it, and the USB socket could only be installed with the cover of the rubber cover of the USB socket open. I was using it as it was for a while, but I was wondering whether I should remove it or not because I thought the terminal would eventually be damaged if the cover was left open, when Yoshimura released Wind Armor. I saw the product image and the mounting stay, and it did not seem to interfere with the genuine USB socket, so I bought it and installed it. Now I can safely close the cover lid of the USB socket and use the socket. The screen design also matches the distinctive front mask of the 8S, so I would recommend it to anyone who uses the stock USB socket and wants a screen as well. View detail
TSRSports Clean
cbr600rr (2bl-pc40) Used for
Every time I change Motorcycle, I change Screen, but usually it is a certain foreign product. [Color] I used to use Smoke, but this time I decided to go with TSR on the recommendation of a friend! Moreover... [Color] Clear! At first I was only worried, but when I put it on and looked through the Screen, it was amazing! [Color] It's great to see it in Clear!
Also, parts to attach to Screen (Guard?) I was happy and impressed that WW is just the right length to use without having to cut the
I think the Body is well made!
View detail