Reviews
It was used as a replacement from OEM.
I have no complaints with the OEM BURGMAN 200, but when I installed the support plate for the Gold attribute of the Brake Pads, I felt the brake dragging at first, and I was concerned, so I contacted the manufacturer. The answer was that they could not say that it is OK to install without using OEM parts. It gets better after a little driving, but at first I was a little worried because the Rear tire did not rotate when idling.
This is the second time I have purchased this product, but I feel it is not as durable as the OEM because the pad has almost no remaining pad after 6,000 km since the last time I replaced it.
I think DAYTONA's RedPad is more durable and Control is better. I think I will probably not use it for the third time.
View detail
Fits: HONDA CB250F, HONDA CB250F, HONDA CB250F <ABS>., HONDA CB250F <ABS>., HONDA CBR250R, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., HONDA CBR250R <ABS>., SUZUKI GLADIUS 400 ABS (GLADIUS650), SUZUKI GLADIUS 650 (GLADIUS650), SUZUKI SV650 ABS, SUZUKI SV650 ABS, SUZUKI SV650X ABS, SUZUKI SV650X ABS
SV650Rear Brake Pads replacement
Rear Brake Pads on a 2022 SV650 were replaced.
I have driven about 100 km since the replacement and will post my impressions.
The OEM had about 9,000 km and it was time to replace the Rear Brake Pads, so we chose NTB for its good cost performance.
Operability is gentler than the OEM, and I felt that if I did not consciously step on it hard enough, it would not work as well as the OEM.
For those who prefer a gusto effect from the beginning, I think it will be less satisfying.
View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
I understand it can handle up to sports driving...
Due to late delivery of my regular Pad.
The selection caught my eye because of how brembo's SACompound.
The product had a Level look and feel, which frankly is not good.
I thought at the time that it was okay because Red looks great when mounted on Caliper.
After the Circuit run, I looked at Caliper and saw that the Red, which had been so prominent, was missing.
I disassembled it and checked it and found that the painted parts were burnt and blackened after an hour's run.
The place used is Motegi, but this is with the body acclimated and not used harshly.
As for the appearance, a little Hard driving is a disappointment.
The performance of the Brake is in line with the price, the durability is not that great, and the cost performance is not so good.
I don't think there will be any problem if you are touring normally, but I don't think I will choose brembo pads in the future.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000 F, SUZUKI GSX-S1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, KAWASAKI ZX-14R, KAWASAKI ZX-10RR, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1300 HAYABUSA, SUZUKI GSX-S1000, DUCATI 848EVO, DUCATI 1198, DUCATI 1198 SP, DUCATI 1198 S, DUCATI 1198 R, DUCATI 1098, DUCATI 1098 S, DUCATI 1098 S TRICOLORE
price-performance
The effectiveness is only slightly better than For Street, and the durability is not good.
5Quantity in 1Season:Set consumed.
I was attracted by the price and tried it, but as a result, it was not cosmetic considering the frequency of replacement and maintenance.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z1000, KAWASAKI 1400GTR, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR, KAWASAKI Z1000, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Pad replacement
Normal. Good cosmetics. Large inventory. View detail
Fits: SUZUKI V-STROM1050, SUZUKI V-STROM1050 XT, SUZUKI V-STROM1000, SUZUKI V-STROM1000, SUZUKI V-STROM1000 X, SUZUKI V-STROM1000 XT, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000, KAWASAKI ZX-10R, SUZUKI GSX-R1000, KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000
Public road0Circuit×.
Used for 1 hour on Circuit for several hundred kilometers on public roads.
There is no problem with sufficient braking power on public roads.
In Circuit, I felt that the Control property is good, but the touch is slippery and the effect is sweet compared to a certain Golden.
When we disassembled the unit, we found that the red paint was burned black and splattered.
There may be no problem with functionality, but if it is going to be like this, why not just paint it from the start?
The thickness has also decreased by about 1 to 1.5mm just from the above use, and the performance is not particularly good, but the decrease is fast.
There is no Repeat because there is no better place for performance and price compared to Golden.
View detail
Fits: KAWASAKI 400SS S3 Mach III, KAWASAKI 750RS Z2, KAWASAKI H1 500SS ( Mach III ), KAWASAKI H1 500SS ( Mach III ), KAWASAKI H1 500SS ( Mach III ), KAWASAKI H1 500SS ( Mach III ), KAWASAKI H2 750SS Mach IV, KAWASAKI W3, KAWASAKI Z1 900 Super Four, KAWASAKI Z1A, KAWASAKI Z1B, KAWASAKI Z2, KAWASAKI Z750 Four Z2, KAWASAKI Z750D
SD-401 should be called the old one.
Using it as it is, it is like that to begin with, but even the double disk on the 650RS W3 only works vaguely.
Especially with Solid's Rotor without Slit, it is the worst in the rain, it doesn't work as well as it should.
This is an area where I would like to ask manufacturers if they can do something about the friction material.
We are working very hard to stop squeaking and increase braking power, but the methodology is a secret.
To increase braking force with the old Tokico Caliper, the Caliper design philosophy must be revised.
Also, the Package was changed from the one I purchased this time, and the Pad has a groove, but the inside of the Pad is not the same as the one I purchased this time. (Fixed side) the groove is in the radial direction of Rotor, but the outer (Piston side) But unbelievably, the grooves are circumferential.
I would like to ask Vesla what he is thinking on this point.
View detail
Fits: KAWASAKI Z250, KAWASAKI Ninja250, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZM50R, YAMAHA TZ50, TRIUMPH TIGER1050, SUZUKI BURGMAN400, SUZUKI BURGMAN400, SUZUKI BURGMAN200, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman SS, SUZUKI DR800S, KAWASAKI ELIMINATOR 125, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250SL
Used for VERSYS-X
No complaints about the price if it holds up.
4,000 kilometers and I'm down to less than half of that.
Cost will be high because it decreases quickly.
View detail
Fits: SUZUKI Bandid 400 Limited V, SUZUKI Bandid 400VZ, SUZUKI Bandid 400 Limited, SUZUKI Bandit 400, SUZUKI Bandid 400V, SUZUKI Bandit 250VZ, SUZUKI Bandit 250 Limited, SUZUKI Bandit 250, SUZUKI Bandit 250, SUZUKI Bandit 1200, SUZUKI Bandit 250 V, SUZUKI Bandit 1200 S, SUZUKI Goose 250, SUZUKI Goose 350, SUZUKI Inazuma 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400, SUZUKI Impulse 400 Type S, SUZUKI TL1000S
Cheaper than OEM, but less effective
OEMPad has gone up in price considerably, so I bought this one.
I feel it doesn't work as well as OEM (need to step harder).
View detail
Standard Pad
Crab type Brembo standard Pad
I can't rely on the comparison of the effectiveness of the pads with MotorcycleManufacturerOEM's Caliper, but the effectiveness is definitely lower.
Compared to the OEM, brembo's area is about 60% of that of the OEM.
Well, if you step on it, it works for textiles,
But! Dust is great, and I guess it's the difference in abrasive materials that makes up the difference in area to make that textile work.
After only about 100 km of driving after washing, the wheels are covered with dust. This has never happened with the manufacturer OEM Caliper and Pad.
The pad itself also squeaks, although it was beveled, but I don't mind the squeak of the Brake itself, so that is not a problem.
I think the people who switch to brembo's Crab caliper are 90% of the people who are focused on the appearance of the product and think that it is fine as long as it works well without regard to performance.
I'm like that myself, but I don't like the Dust that goes out to Sheng Large in exchange for that even if it works for Texans.
I drive on mountain roads with Touring, but I don't drive in a aggressive way and I don't use Rear that much.
So I quickly replaced it with a low DustPad.
The result is a Pad that does not Recommend to TouringMotorcycle or BonsaiMotorcycle, which are only for looks.
View detail
Is it a problem with the lot at the time of purchase?
I used to like the cosmetics in other cars.
Is it a problem with the lot, or was this Pad purchased in the fall of 2021, prepared for BirdCity?
I can't recommend it enough.
Dry is Well, well, well, that's about it. I'm convinced that it works at least as well as it should.
In Wet. Zip until the film of water between the Pad and the Plate is gone. half-effect
I'm honestly afraid of Brake right after departure on a rainy day or after waiting at a traffic light.
I suspected an installation error, but there was no abnormality, and the inspection and maintenance at the store also showed no abnormality.
I have no impression that the company's Pad used in other cars was this ineffective.
I guess it must have been an outlier lot, and sayonara...
View detail
Fits: HONDA 400X, HONDA CBR650R, HONDA CB650R, HONDA CBR650F, HONDA CBR650F, HONDA CB650F, HONDA CB650F, HONDA REBLE500, HONDA REBLE500, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CB250F, HONDA CB250F, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R
It's a little better, but ….
I bought a new GSX250R with both front and rear brake pads because the brake was not working well. After replacing the brake pads, the brake works better than OEM, but I still feel that the braking force is not enough. Personally, I feel that the GSX250R works better on the rear than on the front, so I think that the choice of pads for the rear is even more important. My impression after changing to this KITACO pad is that it works better than the OEM pad, but it is not controllable, and I feel it is difficult to use in winding. When the color changes from Blue to Yellow at intersections, even if there is a 30-meter margin, it will go over the stop line. My personal impression is that I made a mistake in choosing this Pad. View detail
Fits: DERBI TERRA125, DERBI MULHACEN125, DERBI TERRA ADVENTURE125, HONDA PCX125(TAI), HONDA SUPER CUB110-PRO, HONDA PCX HYBRID(JAPAN), HONDA ADV160, HONDA PCX150(JAPAN), HONDA CRF250L SPECIAL EDITION, HONDA CRF250L, HONDA CRF250M, HONDA CRF250M, HONDA CRF250L TYPE LD, HONDA CRF250L, HONDA PCX160(JAPAN), HONDA ADV150, HONDA PCX(JAPAN), HONDA CROSS CUB110, HONDA CRF250RALLY, HONDA CRF250RALLY TYPE LD
declining rapidly
After the replacement, the car was used 90% for commuting on paved roads and 10% for touring on paved roads, with no off-road use.
Perhaps it is natural since it is marketed for use on forest roads, but under my usage conditions, it only lasted about 3000 km.
The OEMPad has lasted about 15,000 km with 70% paved road commuting, 20% paved road touring, and 10% off-road touring, so we judge that this decrease is somewhat problematic.
However, it may be due to the heavy weight of the vehicle body and myself. I think it may not have suited my usage situation, so perhaps it should be used in Situation, where this Pad can demonstrate its superiority.
Certainly, I think it works well, but I have not found it to be dramatically better than OEM.
As others have written, there is a high level of aggression towards DISC and my DISC is in a very hurtful situation.
I was a little disappointed with the results this time around, as SBS's Brake Pads have made a good impression on other Motorcycles I have owned.
The Rear brake of the same type that was replaced at the same time is still in good shape, so I will continue to use it as it is, but I am going to return the Front to OEM again.
View detail
Sunshine is normal Rain is X
Sunny is not a problem. Rain is not.
Since the initial braking is lower than in sunny conditions, those who are Touring and Winding runs in the rain should avoid it.
For those who only ride in sunny weather, the Pad is easy to use with no problems.
View detail
Fits: HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA X-11, HONDA XL1000V VARADERO, HONDA VTX1800, HONDA XL1000V VARADERO, HONDA VFR800, HONDA VFR800, HONDA VFR800, HONDA GOLD WING1800, HONDA GOLD WING1800 US PACKAGE, HONDA XL1000V VARADERO TRAVEL, HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA GOLD WING1800, HONDA GOLD WING F6C
Incorrect brake pads sent to me
I wanted to order rear brake pads for my 2016 Honda Goldwing. These brake pads were on the Honda Goldwing parts page but they are not for my motorcycle. They are for other Honda motorcycle models. I could have returned them but had to pay the return shipping, which from the U.S. would have been too costly. They'll probably be thrown in the garbage or I can donate them to a motorcycle repair shop. I can't order parts from Webike Japan anymore because it's too risky. They sell a lot of very good parts and their selection of products is very good, however, a customer in the U.S. would take a big chance ordering from them. If the wrong item is sent, as in my case, returning it would be expensive. View detail
Fits: KAWASAKI Z800, SUZUKI SV650 S, SUZUKI SV650, SUZUKI GLADIUS650400ABS, SUZUKI SV650, SUZUKI SV650X, SUZUKI SV650 S, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI SFV650, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI GSR250S, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI DL250 V-STROM250, SUZUKI DL250 V-STROM250, KAWASAKI Z900, KAWASAKI Z900, HONDA X-ADV
Average quality of brake pads
I had certain expectations for the brand Brembo, but when the goods arrived, I saw that the quality of the brake pads was not good, showing the feeling of oxidative discoloration and deterioration. However, in terms of delivery time, the delivery time is also fast, probably within a few working days, and the efficiency and service of the delivery staff are also very high, which is generally acceptable, but the quality of the products really needs to be improved. -------------------------------------------------- -------- It has some expectations for the Brembo brand, but when the goods come, the quality of the brake pads is not good, and the performance of oxidation and discoloration and deterioration will be seen. However, the time for delivery is also fast, and it is about a few days of working days, and the efficiency and service of the delivery staff are also very high. The overall quality is possible, but the quality of the product needs to be improved. Powered by Google Translator View detail
Fits: YAMAHA FZ1, YAMAHA FZ1-N, YAMAHA MT07, YAMAHA MT07A, YAMAHA MT07A, YAMAHA MT09, YAMAHA MT09A, YAMAHA MT09TRA, YAMAHA MT09TRA, YAMAHA MT-07A, YAMAHA MT-09 SP, YAMAHA MT-09A, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA TRACER900 GT (ToRacer), YAMAHA TRACER900 (ToRacer), YAMAHA XSR700, YAMAHA XSR900, YAMAHA XSR900, YAMAHA YZF-R1
It's not working at all
I replaced the DAYTONARed pad with NTB because I thought the rear brake should be less effective.
I was not aware of any special ineffectiveness in go-stop on the street, but I lined up the panylon at a sneak peek place.
When I started practicing, I could not control the posture at all. Even if I stepped on the rear brake to trigger the load shift, there was no response.
I had trouble with my Red Pad because it ran out in 4 days, so I went with NTB, but this one looks like it will work for about 2 years. w
View detail
wash-compatible products
OEM Product compatible NTBs were selected. The front and rear were replaced at the same time.
Brake's effectiveness is normal. I personally prefer a more Paris-like effect, so I give it 2 stars. Next time I will choose another Manufacturer and compare the taste.
View detail
OEM Compatible Products
OEM Product compatible NTBs were selected. The front and rear were replaced at the same time.
Brake's effectiveness is normal. I personally prefer a more Paris-like effect, so I give it 2 stars. Next time I will choose another Manufacturer and compare the taste.
View detail
Fits: GILERA Fuoco 500 ie, GILERA Runner 125 FX (Grimeca Cal), GILERA Runner 125 FX (Hengtong Cal), GILERA Runner 125 SP (Grimeca Cal), GILERA Runner 125 SP (Hengtong Cal), GILERA Runner 180 FXR (Grimeca Cal), GILERA Runner 180 FXR (Hengtong Cal), GILERA Runner 180 SP (Grimeca Cal), GILERA Runner 180 SP (Hengtong Cal), GILERA Runner 200 FX, GILERA Runner 50 SP, GILERA Runner 50 SP, GILERA Stalker 50, PIAGGIO 125 MP3, PIAGGIO 250 MP3, PIAGGIO 300 MP3, PIAGGIO 400 MP3, PIAGGIO 500 MP3, PIAGGIO ET2 50 Vespa, PIAGGIO ET4 125 Vespa
for some reason
Quantity:I ordered 2 sets and received one with and one without grooving.
I wish they would have sent one or the other of the same.
View detail