Reviews
Fast turn support, rigid enough to be the best
The 3715SLK is equipped with an idle grip for fast turning, although the data on the Webig product data is not completely clear. The handlebar is equipped with a ball point that can be locked at the center.
I think this is the best product for those who are looking for a 3/8Size THandlebar, but it would be impossible to purchase from this product Data. I think it's a lost opportunity, but since it's a well-known product, everyone buys it from FACTORYGEAR or Amazon, so I guess it's not inconvenient?
View detail
A must have for working in your bike!!!
This tool helps a lot when you need fast screwing. Sometimes you do not need carry many tools, the simple is the best... :-) View detail
Easy to use
Grip with non-slip surface is easy to grip and work with.
It is convenient to remove the Clip without exerting force.
View detail
Basic Tools
As expected from Kohken.
The quality is reliable with a good balance between price and quality.
It is easy to use because it is easy to apply force and has a good feel.
Balance is also good so it spins around.
The fit with Bolt is also very precise and does not lick.
View detail
Required for special vehicles.
The Axle Nut can only be removed by turning the rear wheel of AGUSTA with this spinner handle with great force.
I tried it with a short-handled Handlebar at first, but it didn't freak me out.
It's a necessity for those who remove the rear wheel.
View detail
Flailing Torque is light
It is a 1/2 size Ratchet Handlebar
There's not much to do in the maintenance of a Motorcycle, but
There are occasional opportunities to loosen up the Axle and so on
It is convenient to have
Ko-Ken's Ratchet is good but the flailing Torque is light
A small number of GEAR is a drawback
There are a lot of situations where Ratchet can swing Large in 1/2 Size
You don't have to be a mainstream GEAR to use it these days
It is robust enough that it is not likely to be broken even if you hang a large torque on it because of the small number of GEAR measure
And Ko-Ken's unique Knurl process with a slippery handle that was cut into a groove seems to be a favorite But it's so great that I think it's the only one that fits
View detail
Easy to use
As expected it is easy to use koken.
Balance with price is also good, it is a quality that can be relieved.
Because Head does not become obstructive and disturbing like Ratchet Handlebar,
Spinner handle is useful for Quick work.
View detail
It is a Spinner Handle of 1/2-inch angle corresponding to the place used by high torque rather than 3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ke
It is a Spinner Handle of
1/2-inch angle corresponding to the place used by high torque rather than
3/8-inch angle which is a general Socket size as a tool of a motorcycle. -- individual -- good -- everybody -- although it is a product by Cau Ken, it is an agreeable impression which the Socket-joint portion at the tip of
moves with a Snap.although the photograph is in the state equipped with the Socket for Bolts with a big width across flat used for a car body --
-- it turns also around the Bolt which adhered to firmly snappily.Only by
, however this, if work is impossible and a 1/2-inch angle Socket is not newly purchased, it is die length as seen with the
photograph, and will be a literal useless thing.
View detail
[Webike Monitor] By a in-vehicle tool, since 2 and having are inconvenient, a Driver is corresponded with a Socket. The Handle which can use , therefore a Socket was purchased. Since it can use even if it bends, even when it is straigh
[Webike Monitor] By a
in-vehicle tool, since 2 and having are inconvenient, a Driver is corresponded with a Socket.
The Handle which can use
, therefore a Socket was purchased.
Since it can use even if it bends, even when it is straight, I think that user-friendliness is good as an in-vehicle tool.
When you buy it as a tool for daily use, in order that there may be no Ratchet function, it seems that it is inconvenient.
View detail
even if there is also die length moderately and it seldom puts in power, it is closed firmly -- -- if the place which is used for a long time is good -- ♪
even if there is also die length moderately and it seldom puts in power, it is closed firmly -- -- if the place which is used for a long time is good -- ♪ View detail
It uses for removing the Rear-wheel Nut of Ducati748. The power applied although about 300-mm L character Handle was used before is in a completely different class. the accuracy of each part is high and a Head and a Socket suit -- Locke -- and dust is c
It uses for removing the Rear-wheel Nut of Ducati748.
The power applied although about 300-mm L character Handle was used before is in a completely different class.
the accuracy of each part is high and a Head and a Socket suit -- Locke -- and dust is carried out.
Moreover, since the height in the state where the Head was pushed down as compared with other Manufacturers is stopped, power can be applied correctly.
Although
one chose the MODEL of the Knurl, there are a resin grip and other Mirrors.
Mr. Cau Ken who prepares a choice by people since it is various which is easy-to-use is true.
Even if it should damage a
head part, a repair Parts is obtained at a low price.
He was actually helped by Colet.
But it seems that a Torque or kicking are wrong and it hardly breaks in anticipated use until it breaks.
Although the frequency to be used may be low, by a good tool, the work which requires big power is done rightly and cooked.
View detail
Although which goods are chosen apparently, it is the same goods, but the point considered that this product of Ko-Ken gets across to a Socket exactly, without power escaping since the Shaft has an ellipse instead of a round head thinks that it wo
Although which goods are chosen apparently, it is the same goods, but the point considered that this product of
Ko-Ken gets across to a Socket exactly, without
power escaping since the Shaft has an ellipse instead of a round head thinks that it won compared with the product of
other company.
View detail
[a Webike Monitor] -- in-vehicle -- business and a tool for daily use -- purchase. The feel of die length or a Handle is also good. I think that it can use also for the place which needs a Torque to some extent since it can slide. Suc
[a Webike Monitor] --
in-vehicle -- business and a tool for daily use -- purchase.
The feel of
die length or a Handle is also good.
I think that it can use also for the place which needs a Torque to some extent since it can slide.
Such a device is numbed again as the Shaft has an elliptical form.
I think that less than the PRO that does easy maintenance has value over which it passes enough even if it is not a highest-class tool.
He is wonderful Brando who can trust it.
View detail
[Webike Monitor] It purchased in order to loosen the Rear-axle Nut of Ducati848. Although it remained unmoved by the Spinner Handle of 50-cm length, it can loosen now easily and is large satisfaction! It is and structure was solid as ex
[Webike Monitor] It purchased in order to loosen the Rear-axle Nut of
Ducati848.
Although it remained unmoved by the Spinner Handle of
50-cm length, it can loosen now easily and is large satisfaction!
It is and structure was solid as expensive, but since the honest structure so far did not have undue importance to itself, when there was a low-priced edition, I thought that it was good.
View detail
Looking for the spinner handle of [Webike-monitor] 12.7sq, this product was decided on. If it is called a spinner, KTC is major, but it is a prejudice of a product made into Cau Ken. [ as opposed to / if it decides / the low price of a price ] Alt
Looking for the spinner handle of [Webike-monitor] 12.7sq, this product was decided on.
If it is called a spinner, KTC is major, but it is a prejudice of a product made into Cau Ken. [ as opposed to / if it decides / the low price of a price ]
Although there was die length with 380 mm, 450 mm, and 600 mm, 450 mm which is settled in a tool box and can impose sufficient torque was chosen.
It is trenched [ which locks a point at 90 degrees ].
Since a handle does not move at the time of use, it is easy to apply power.
A grip is three kinds.
If it chooses by appearance, it will be polish, but it is a knurl grip on which it is hard to slide even if it will be stained with the resin grip which is not cold, and oil also in winter, if practicality is thought as important.
Since recommendation can be semipermanently used as compared with resin, it is a knurl grip.
Even if stained with oil, it can grasp firmly and is visible to free knurling apparently, but if actually had, the firmly feeling beyond anticipation will be felt.
Furthermore, the inside of a grip part has a hollow configuration, and only the grip part is welded and made later.
Moreover, a shaft cross section is the first time in [ by which the weight saving is carried out to a limit ] thoroughness, having elliptical to the direction which requires power and securing sufficient rigidity.
In spite of being scrupulous so far and being made, the price is about [ the same as KTC or slightly cheap ].
Considering cost performance, there is no hand of not choosing this product.
View detail
It is found useful although a hard bolt is loosened. Since torque starts easily when fastening, you have to warn against turning off the screw thread.
It is found useful although a hard bolt is loosened.
Since torque starts easily when fastening, you have to warn against turning off the screw thread.
View detail
It purchased in order to exchange the rear tire of DUCATI 1198. Although removed with a 55-mm socket, since bolting torque is 230 Nm, the axle nut of RIA of 1198 is rather strong. By 60-cm L handle on hand, since it remained unmoved, this product
It purchased in order to exchange the rear tire of DUCATI 1198.
Although removed with a 55-mm socket, since bolting torque is 230 Nm, the axle nut of RIA of 1198 is rather strong.
By 60-cm L handle on hand, since it remained unmoved, this product is purchased.
When trying, that which remained unmoved till then turned very simply.
truly, the difference between 100 cm and this torque clear-came out, and it carried out it.
User-friendliness is also good.
He had no complaint.
View detail