Reviews
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA SMAX, YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA Majesty S, YAMAHA BWS125 (Bewith), YAMAHA SMAX, YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA Majesty S
Cospa is expensive!
Used for '07 SE44J.
I was thinking that it was for setting in terms of price but at 2 to 3000 km there was no abrasion like wear.
Although I used various weights, it is surprisingly practical, even if it is not as good as OEM.
It is essential to take BALI before assembly, but I think Cost performance is high.
But 6. Only 5 g, using about 100 km to disassemble
There was a thing that the press-inserted Gold genus part is coming out.
It was in contact with Pulley, worn out and covered with powder ... but as soon as I realized it, Pulley's Damage was the smallest limit.
This Roller is the lightest 6. Even at 5 g, Gold Material is the same, resulting in extreme thinning.
I am not sure whether it was relaxed because of that ... but because I am afraid of Pulley's Damage
We are using other WR's weight.
View detail
It is Repeat ♪
Previously used for 3KJJOG, the opening was wider than NORMAL and some power up was made, so purchase this time as you purchased AXIS 90.
Although it is not yet installed, I am expecting some power up this time together with 3 KJ intake manifold and Turbo filter ♪
View detail
![[Repair / Optional Parts]Clutch Outer](https://img.webike-cdn.net/catalogue/14762/02050216_510fed097e454_TS.jpg)
Fits: YAMAHA Majesty 250C, YAMAHA Majesty 250 ABS, YAMAHA Majesty 250, YAMAHA Majesty 250, YAMAHA Majesty 250
I received another thing that I asked for.
When I ordered and went to Motorcycle shop for installation, I was not addicted to Large as well as Clutch Shoe I asked at the same time.
I received a thing of 4 HC in a small round.
After that the exchange correspondence is very quick and we are satisfied with the correspondence, but I expect to not have this kind of thing.
View detail
Fits: HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOSR
KN project 26 Pie Big cabSet has - - (AF35)
(71cc - Compression pressure 10. 5ber - Does not stall at full throttle Limit Air-fuel ratio adjustment -
Also adjust the diameter of JN - I tried with Air cleanerCase processing and direct carburetor)
"NM -> before regulation Exhaust System - BK 26 → Big cab "
"KN project 26 Pie carburetor Set → BK 26 - KN project ZX03 Exhaust System → ZX 03 "
Empty space at BK 26 + NM and beat about 7500 revolutions - 70 km running
Bakugan with 846 spinning sky with BK 26 + ZX 03 - 80 km running
Because it turned out to be the result, KN project 26carburetorSet lacked high rotation.
It should be good to come out as the number of revolutions rises, but the sound became higher with bean.
It was SJ 38 at NM but AS returned by half turn in ZX 03.
Idling gets higher as you are traveling, even if it matches to a certain extent
The current time will always stabilize because I stalled after returning Chalk at startup
I made it to SJ 42. If we focus on this area, we will lower SJ but not Race.
PWK 28 carburetor was also short of high rev.
It may be good to have a pure position carburetor.
WR adjustment has a preference for running, so I can not say it
Apart from this Exhaust System alone - - -
(The regulation before exhaustion exhaust system has no clogging etc.)
The recommendation column for friends is Spec. It depends
View detail
![Live DIO Series Late 3 Hole Manifold [AF34, 35] Big Carburetor Set 26mm Carb](https://img.webike-cdn.net/catalogue/14762/06101620_51b57e243bc6c_TS.jpg)
Fits: HONDA LIVE DIO, HONDA LIVE DIOZX
Well normal - LIVE DIOAF 35 reform 71cc
The stall at the step which I wrote last time was improved by oil level adjustment.
I used the ClearFloat chamber to lower the oil level.
(Improve near Clear's Gauge 80)
Although running normally, although it is TorqueUP
Normal cab and acceleration do not change.
(Probably because the flow rate is falling)
NORMALAir cleaner processing - Add two holes
SJ42 - Adjust with MJ 115 (Winter) (Plug a little dark color)
40 - 50 - Chica La is getting stronger with Axel opening from 60 kilometers
Acceleration feel is the same as Normal cab
It is 10 km uphill on the uphill slope.
It will not be a comparison with PWK 28, but it will be this level of thing
View detail
It is cheap but has difficulty in durability?
We are using it for water cooling of GRAND AXIS.
When purchasing MechanicalPump use attached Seal for about 3 years. Although it was used as a spill by water leakage or fitting, when Seal was also exchanged when changing the bearing Bearing, water leakage occurred exactly one year. Water leaks even after the water temperature exceeds 100 ° C or even after warming at subzero temperature.
However, there are times when it does not leak, so it is probably a part to be replaced regularly.
It's easy to install, but it is Parts I do not want to exchange frequently as much work that comes with such as Parts to be removed and bleeding of cooling water etc..
Also, since it will be scrapped when it becomes out of stock, please supply parts for a long time.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA Lead 50, HONDA Lead 50, HONDA CABINA, HONDA JOKER Helmet, HONDA BROAD
Good acceleration but unnecessarily small, meaning top speed is limited. I see no reason for making it with a smaller diameter than the stock variator and drive face.
Good acceleration but unnecessarily small, meaning top speed is limited. I see no reason for making it with a smaller diameter than the stock variator and drive face. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
Cospa, appearance, functionality is good.
I attached it to ADDRESS V 125S.
Drill, use Thunder, also remove Helmet in
I installed it.. It was a big thing..
of course, "125 S" It is purchase, installation, knowing that it is not conforming.
Attached is attached, but considerable time and effort
Let's prepare.
But,
There was a hard time, "Burn" And Helmet in opening
It looks convenient to use.
View detail
Fits: YAMAHA JOG Z, YAMAHA AXIS 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Super Jog Z, YAMAHA Super Jog Z, YAMAHA Jog (2 cycle), YAMAHA BWS100 (Bewith), YAMAHA JOG-EX (3YK1-5), YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA JOG-EX (3YK1-5), YAMAHA Grand Axis
More than OEM
As I got inquired I was able to install it on the GRAND AXIS 100, so I bought 3-Clutch, a cheaper KN project than OEM! (^^) ! View detail
Fits: YAMAHA Remote control jog, YAMAHA Vino (2-stroke), YAMAHA Remote control jog, YAMAHA Remote control jog, YAMAHA Jog ZR, YAMAHA Jog C, YAMAHA Super Jog ZR, YAMAHA Jog Aprio Type 2, YAMAHA Grand Axis, YAMAHA Axis 90, YAMAHA JO90, YAMAHA BWS100 (Bewith), YAMAHA Super Jog ZR, YAMAHA Jog Aprio Type 2, YAMAHA Grand Axis, YAMAHA Axis 90, YAMAHA JO90, YAMAHA BWS100 (Bewith)
Acceleration etc. Expected by Large
acceleration - I think that it can be expected to be intermediate high speed, but since Instruction Manual is not enclosed, how to attach it is not good (-_-) / ~~~ kN Planning (Wei Big) I am asking for an instruction of the Instruction Manual. I will also imprint after installation. View detail
Somewhat difficulty with accuracy
Screw on Air cleaner side changed to Stainless because there was some rust from the beginning.
Because the position of the hole was slightly misaligned on the Brake hose side, it was scraped by File and installed.
I was prepared for these two places because other people were also pointed out.
View detail
Excellent Cost performance
It was not possible to purchase because the inside diameter of Handlebar made in China is different.
But it was a thing that I liked
I tried hard by processing Rubber but it was impossible.
I got angry so I could force it in with Hammer and fit it snugly.
Conclusion, it is useless for Chinese Handlebar.
Chinese handlebar is useless.
Handlebar is useless.
View detail
Disappointing!
I bought it because I wanted Mirror of a round shape of old style and the price is cheap.
I never saw the contents after purchasing, found Wound on one Mirror at the time of installation.
There is no problem even if there is a Wound in Cover, but Wound is useless for Mirror.
Unfortunately, there is no evaluation of visibility. Wound disturbs.
Cost performance is awfully bad due to Wound.
The shape is good, the back can be seen properly, it is a good item if it is decent.
I use Opposite Thread Screw Adapter to install Right Side.
View detail
Fits: YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith)
Dress-up effect preeminent!
Although it is a place not conscious much, when Fan cover is colorful and made of Skeleton, it becomes a powerful appearance because not only the color but also inside can be seen through.
Material is easy to break, so it is safe to do installation carefully.
Because my engine is crispy, the vibration is also strong, and Items of this hand are fragile and are the third purchase.
It is cheap, but if the rigidity is a bit stronger - - -
View detail
Well made product. Is only about 5mm longer than standard. Red anodising is more of a pinky colour. There was no hole for the side stand switch for the 2017 model grom, easy to mark and drill one. otherwise fitted perfectly.
Well made product. Is only about 5mm longer than standard. Red anodising is more of a pinky colour. There was no hole for the side stand switch for the 2017 model grom, easy to mark and drill one. otherwise fitted perfectly. View detail
Fits: SUZUKI address V125
The effect is - - -
Pulley alone did not understand the effect at once.
Those who are planning to purchase should also exchange Clutch.
It might be a cheap Pulley (lol
View detail
Fits: SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125G LIMITED, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G LIMITED, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
To suppress water splashes
Especially it is not a Fender cut, but OEM's Inner fender (Small things you can not call) I tried installing it because it does not depend on.
Although it ran for a while after being attached with a pon attachment, there was a trace of interference at the time of Bottom at two places, a part inside the Air cleaner and Inner at the bottom of the Fuel Tank, so we made a Cut. Since I had interfered even when I was on a rider, I wondered if I had further interfered with the riding of two people. By the way, 1 of DAYTONA. It is time to use Rear suspension of 5 cm long..
View detail
Ideal for Touring
There were people who were wearing well when I went to Hokkaido three years ago. I said that it is best for Long touring,
The first time I bought it with Napps. Because I did not know Wa Big. I became a member and purchased it.
It was half of Nappus. You can also use it with the feeling that you use it lightly hanging on the palm of the Right hand.
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis
Mounting on MAJESTY 125 FI's Rear brake
Exchanging the exhaust system but replacing it → Loosen Wheel nut 24 mm and remove Wheel. Loosen or remove Brake Washer. I need hang in the direction of force and pulling, but I will remove the wheel and exchange it.
In the reverse procedure.
Impression of goods, but with RACINGBrake, but until about lock it did not work.
Of course the area around Drum etc. I polished and degreased and cleaned before installing.
It is somewhat better than OEM.
View detail
Fits: YAMAHA Horizontal TypeEngine system before regulation, YAMAHA JOG (2Cycle)
Mudguard prevention
Mudguard prevention and design priority attached.
This VINO is Rear tire size "3. I am wearing 50-10, but I can manage it somehow. Clearance 10mm is it?.
Is it a problem of the product itself or my VINO car body problem?...
Fixing method is ClutchCase's ScrewQuantity : It is 2 pc, (Method to fix with one side) I did not match the position with Tire by all means, I adjusted the position by hitting Bracket with Hammer.
Preventing Mudguard is a craze, but when it is attached Plating paint peels off and sticks to the hands...
Will it peel off when I paint my home?.
View detail