Reviews
Fits: HONDA ADV150, HONDA PCX125, HONDA PCX150, HONDA Click125, HONDA Spacy125, HONDA LEAD125, KYMCO GRAND DINK125, KYMCO GRAND DINK150, SUZUKI ADDRESSV125, SUZUKI Avenisu, SUZUKI swish, SYM RV125, SYM RV150
0.WR in 5g increments
KN Project Dasan Only Round TypeWeight roller (WR) Weight is set in 0.5g increments (And then there's the oddly shaped Dr. Pulley) 。
The same is true for all WRs, but since there is BALI, just remove the BALI with sandpaper, etc. and the rotation will be smooth.
WR weight matching is possible down to 0.1g, and the same number of grams is placed diagonally for smoother rotation loss. (without eccentricity) The WR of KN project had an error of ±0.1g, which is a normal accuracy.
Durability is normal.
The price is half that of a well-known manufacturer.
No Grease required for WR (It will be a resistance, and it will also lure in Beltkus, which will also be a resistance). Axel full open highest speed to full closed/full Brake to full open (Re-acceleration) When the stickiness is a little bit by Grease etc. at the time of (resistance) Response is delayed if there is a
View detail
Large carrying capacity which makes it perfect for loading up the Monkey for a weekend away
About quality and texture, I can confirm that the quality is good and that the material used is steel tubing and finished with a black painted coating before I had the chrome plated finish added to better suit the styling of the Monkey. About the feeling of use, This rear rack has a large carrying capacity which makes it perfect for loading up the Monkey for a weekend away . Products to buy together, To get the most use out of the rear rack if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear rack was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the rack with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a rear rack with a great carrying capacity but the finish was not to my liking. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Air filter replacement
The product was full of dust and considering the application, I will still go with OEM Parts next time. View detail
Fits: YAMAHA SUPER JOGZ, YAMAHA SUPER JOGZ
Mouth Gold.
It looks the same as OEM Product and Large, but the slit at the mouth of Valve's Gold part is too thin to put Valve and Socket together.
Hard work.
View detail
Fits: YAMAHA Axis 50, YAMAHA Jog Aprio Type 2, YAMAHA JOG EX 7PS, YAMAHA JOG EX 7PS, YAMAHA JOG Z, YAMAHA Super Jog ZR, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA JOG EX APRIO (All models), YAMAHA jogpochet, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Vino (2-stroke), YAMAHA Remote control jog
It is a great Kit for the high price. I can recommend it.
The finish is very beautiful as it is very expensive, and even though I assembled it without BALI and rode it without careful breaking in, it didn't seize up.
The clearance of Cylinder and Piston is no problem at all, but it might be better for your mental health to at least brush the corners of the Piston with Paper. The supplied clips are easily deformed and are very difficult to assemble.
Oil is separated by 3kjPump before regulation. The oil is still in the same condition as it was before the regulation.
View detail
Fits: YAMAHA SMAX, YAMAHA MAJESTYS
I think I'll enjoy Setting.
Removal and installation was easy.
The bolt that the suspension is attached to is so clean that it is hard to believe that it belongs to a motorcycle that has been used for 7 years.
Spring is a different thickness and length than Manufacturer's...
I'm sure they're making the ride more comfortable here, and it looks like the sag is adjustable.
I thought it was pretty good, but it doesn't come with Manual... What are the factory standard values? It was.
My impression of the actual ride is...
Seat height was raised just a little bit (Spring length was adjusted and installed, so it is almost the same as NORMAL).
When you ride up on the Gap, there is still a Shock, no difference between Normal and Large.
Rising up and launching Zero. They push you forward." It's fun to have a sense of what's going on.
It's my first day on board, so here's what I have to say.
I have to sag out and I don't know the standard value...
The only way to do this is by setting it up based on the feeling of the ride, but that could be fun too.
It may take a long time, but it may be the only way.
The colors seemed to be moving toward manufacturing convergence and only Blue remained.
Orange would have been nice, but oh well.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Used for SE461
[How is it used?
The MOS Crankcase Filter I had been using was very dirty and Timing was good and I was able to get a good price at Webike's OutletSale, so I decided to replace it. Thank you very much. The price range is just right for when you are one step closer to free shipping.
Was the one you received as per Image?
It is the same Gold Genus Mesh that we have been using.
The color is now gold and a little more shimmering.
Usually, it fits within the Case, so it is no different, but when it is bare, it may be a bit Fashion.
Was the installation difficult?
The pure Normal Thread Screw that is installed is a Plus screw, so it will be Large sturdy if you are careful not to lick it.
It is good to install the stopper by aligning the large hole in the middle with the small hole that serves as the stopper, so that it will not gap.
How was your experience with it?
Since it is not Sponge like OEM, it does not deteriorate and become tattered, and I prefer Gold Genus Type.
Since this is a part that gets a lot of heat, I thought that the Gold genus would be better in terms of durability.
The air duct was sucking in Sponge, but the filter is preventing foreign matter from getting into the Crankcase. The fine mesh is good.
[Included Parts:were they on?
Not particularly
The Package was double packed and carefully packaged.
View detail
I replace it every 20,000 km.
Reached 20,000 km since the last replacement. I bought this one again after the last time because it is the lowest price among the Net purchases according to my own research. I bought this one again, but this time the area of the filter was a little smaller than the previous one, which may be due to cost reduction. The installation was smooth and the precision of the others was good. View detail
Required for Fender Eliminator vehicles.
To increase the rigidity, I used Cemedine's METAL LOCK to fix the License Plate Holder firmly and attached it to the Reflector Bracket. View detail
Fits: HONDA CHALY, HONDA SMART DIO Z4, HONDA LIVE DIO, HONDA LIVE DIOJ, HONDA LIVE DIOS, HONDA LIVE DIOSR, HONDA LIVE DIOZX, HONDA SUPER DIO, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA PCX125, HONDA PCX150, HONDA Spacy100, HONDA TODAYTODAY, HONDA DIO DIO, HONDA DIO DIO CHESTA, HONDA Giorno
Looks cool.
Anyway, since it is a race ish, it is similar to KITACO's discontinued product, but if you put it on CHALY and start off on a slope, high-octane gasoline will leak just a little bit, but I forgive it because it looks cool! View detail
GYRO's Bore up
I bought this for a GYRO Bore up. The bolt holes are a little off. The bolt holes are a little off, but I think it would be better to cut them a little. View detail
Fits: YAMAHA BW'S125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BW'S R
I'm glad I bought it LargeSatisfied ^^.
After all, Brand is reliable. "KOSO !
The mani was also, but the production is outstanding!
The OEM's Throttle position sensor hole position is also Exactly "Scauper." It was added as follows.
The test ride felt like a fat Torque in the mid-speed range.
On the other hand, the start of the song seems to be a little mousy...
I think 32 pie is a little too large for Standard Bore, but I have a plan to bore up in the future, so I'll take it as a good thing ^^.
The maximum speed has not been tested yet and will be in the future.
And one thing I noticed is that the Axel opening seems to be larger than NORMAL...
Maybe it's just my imagination ^^;.
I was extremely satisfied with the product in any case ^^.
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125ABS, YAMAHA NMAX150, YAMAHA NMAX155ABS, YAMAHA NMAX155, YAMAHA NMAX155
Cheap but not high quality impression
I purchased this product as an OEM replacement. Unfortunately, rust was floating on the surface at the time of purchase new….
The plating itself was not floating, so I polished it and used it. The Pulley boss was already worn out, so I replaced it with a Smooth gear shift.
If you are concerned about rust, OEM is better because they take measures by wrapping rust-proof paper to prevent rust from occurring.
View detail
Use as a cargo hook Size is also unobtrusive and fashionable dress-up!
Quantity attached to the Main pipeCover of CROSS CUB110 (JA60):Pair (for Left and Right) Remove the screws at three locations each,
I changed to License bolt to use it for Carco Hook.
The size is just right for hooking Cargo Net or Elastic band.
I am concerned that the Center cover may be damaged, but I would like to find something to protect it.
Main pipeCover Screws are available in M5 and M6.
M5 screws have a gap of about 10mm, while M6 screws have a gap of about 5mm,
NylonSpacer and NylonBush are available.
This will hold it firmly in place without any rattling.
View detail
Parenthesis good!
Parenthesis is good. I replaced Mirror of Takekawa, but it is hard to see as I expected. [Color] It is not clear, so it may be difficult to distinguish fat cars and White Motorcycles… You have to be careful about tracking.
The Mirror and Bracket are operated by the ball, but it has a screw so that it can be re-tightened if it gets loose.
View detail
Use with Bush Face's License Plate Holder.
I combined it with PolishFace's License Plate Holder. I use Cemedine's METAL Lock to fix the Holder and Bracket tightly. It has a good feeling of rigidity. View detail
To Restore.
I used it on a MAJESTY 125 Restore that I purchased used.
The oil leak from the cylinder head, which is a pre-existing condition of this vehicle, was so severe that we decided to replace it because it was in a very scary condition to drive.
The work went smoothly and the leak was stopped without incident.
I have no problems with the quality and I would repeat it again because it is inexpensive.
View detail
Looks GOOD!
I purchased it at the same time as the Front Blinker part.
To install, simply attach it to the Body with Double-sided Tape and affix it to the vehicle body.
Front Blinker is the same, but the Fit is not quite right; Wobble is not, but there is a gap.
It looks GOOD, but the Fit feeling was not so good.
View detail
It looks good
[How is it used?
Town ride
Was the one you received as per Image?
It is not too dark at night on Image Street.
It looks better.
Was the installation difficult?
We used double-sided tape to affix it, but since there were no instructions on where to affix it, we affixed it where it would adhere best.
Additional double-sided tape was also applied.
[Included Parts:were they on?
Double-sided tape only, no Instruction Manualetc.
[Was there anything that disappointed you?
It's not so much that I need an instruction manual, but at least explain where to put the double-sided tape.
Also, the fitting is not good. It does not fit snugly and seems to float a little.
I guess I can't help it since I'm so focused on appearance.
View detail
For a little Accent
[How is it used?
The bolts that hold up the exterior of my long-owned motorcycle have become rusted over the years, If we're going to replace the Bolt anyway, let's put some Accent in it." This product was purchased to match the Cap bolt with the
The several color variations are useful because they allow Spacer to be used in accordance with the color of the car body.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
None
2 piecesQuantity:The price for the set is 880 yen, and I would appreciate it even more if it were a little cheaper, but the product is out of season, so I guess I should be glad that it is on the market.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 9 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, please purchase a cap bolt of each material & length that you want to install.
[Opinions and requests to Manufacturer
It is easy to purchase large quantities if the price is a little lower, so a quantity of 10 pieces is 10% cheaper.:A Set would be even more appreciated, please.
View detail