Reviews
TS125R.
This is the Hose of the 2-st Oil.
This is the transfer section from the oil pump to the carburetor.
When cleaning the carburetor, the existing hose was replaced because it had broken due to deterioration.
I.D. 2mm was not found in any homestore or supply store.
View detail
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
Stainless bolt
Exhaust System fixing parts are rust-resistant Material:Changed to Stainless Steel.
This makes it rust-resistant and looks good.
View detail
Prepare just in case
We prepared just in case this was the first time we had to replace a Tire. View detail
Attractive variety and low cost
Cost performance as a universal product is NO.1. View detail
Stop guessing and use this tool to set your oil level.
Easy to use, clear markings on the tube. My only complaint is that the tube and hosing can separate when attempting to push fluid out of the syringe back into the fork oil container too quickly and creates a mess. A small hose clamp might solve this. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Not always available.
Note that each GS has its own ideas about whether or not they will allow you to refuel.
If it is a store that will refuel you, you will probably have to show ID and sign a form.
It is a relief to have spare fuel at home, knowing the chaos that ensued during the earthquake.
However, storage space must be considered.
(I think you need a Seal, which is approved by the fire department, like a carry can. Some shopkeepers say
As long as it's posted, it's OK to the contrary.)
Complaint, the paint seems to be a little weak. It peels off when rubbed or bumped lightly.
Note, there will be a pressure difference, so you should put in a little less, even though it's clearly marked as 5L.
I thought it would be possible to avoid Gasoline spewing when the lid is opened, etc.
It is difficult to put Gasoline in the Fuel Tank, so you need to be creative not to spill it.
View detail
A wide variety of products and low cost!
It is highly universal, and its cost performance is No. 1. View detail
Fits: HONDA ZOOMER(Ruckus)
KN Planning Exclusive Tool for Disassembling of Drive System
I bought it because I thought it would be universal to some extent, although it was designed to be used with ZOOMER.
Exclusive Tool for Disassembling of Drive System". This is a straightforward Naming product, but it is a proper product name.
The common trade name is Universal holder.
As the name suggests, it is used to prevent parts from turning when removing the clutch or pulley face of the scooter.
I used it to service my ADDRESS V100, but I feel like I need to think carefully about where the force is applied to use it on the Pulley face side.
I use it with electric Impact wrench as a supplement.
View detail
difficult (e.g. customer, guest, child)
I bought this because it is so easy to use.
But after the first replacement, Wire was torn off.
I don't know if I put too much effort into it or if it's a trick...
I reported it to webike and they were able to replace it.
I will try again at my next Tire replacement!
So I'll give it a rating of 3 for now.
View detail
Easy to use.
I bought this for servicing an acquaintance's Address, but bought a 46mm usable one to use for servicing MAJESTY 250.
The clutch can be easily disassembled and is firm and thick enough to be used safely.
View detail
(something) better to have
[How is it used?
Used for Fork oil change
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use as it is a dedicated product.
The Measuring Cup sold at 100-yen stores has a wide spout that might overflow, so it would be less stressful to have a Measuring Cup.
[Points to note]
nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is better to have something like ForkSTAND so that you don't blunder the Oil that you have poured. Especially for those who work alone.
View detail
Considering Cost, there is enough.
I use Mitutoyo's Desginogi for my work.
Other Material:I have also used Plastic's Desginogi.
This is made of Gold genus, so the minimum Line is [Color] We believe that the material is clear.:Plastic's Desginogi felt like little more than a toy.
I am concerned about using the measurement tools on a work level because they are subject to periodic inspection, but I don't mind because I don't see them that severely in a private setting.
The display shows up to 0.01mm, but since it is Caliper, it should be considered only as a reference.
However, considering the Cost, it is enough.
View detail
Fits: HONDA Superdio, HONDA Dio (2 Cycles), HONDA livudio
Nice and high quality bolt
Very high build quality. The material also stainless steel and nice looking. Recommended for replacement and upgrade. Beautiful product for your great bolt and disc. View detail
Fits: HONDA ZOOMER(Ruckus)
Required for drivetrain maintenance.
This tool is indispensable for removing and installing pulleys and clutches. There are a variety of such tools sold by various companies, and we were not sure which one to purchase, but we chose KN Kikaku's tool this time because of its price and the fact that the company is a manufacturer that handles many ZOOMER parts. There are two types of ZOOMER parts:one is a hook type, like this one, and the other is a type that wraps around the circumference of the product, so you can choose the one you like best. I used the one shown in the photo by fixing it to the ground and had no problem using it. I think this is the most common way to use the Case when working alone. The torque for installation is large, so it is difficult to hold it down with the left hand and tighten it with the right hand. If you do not want to scratch the car body side, I think it will be a good idea to protect it with cloth to prevent wounds. View detail
For air venting
Air can be easily removed by maintenance of the brake.
Air can be released easily and efficiently.
Oil Resistant Hose is also included, which is helpful.
View detail
Can use
Convenient to use for a wide range of corresponding Size for tightening of Hose.
It can be used with confidence because it can be tightened securely and there is no worry about liquid leakage.
It does not rust easily and can be used for a long time.
View detail
Used to measure Fork oil level.
There are many ways to adjust the oil level in Fork, but this is the best way to get the most out of it.
It was easy to adjust by simply inhaling.
Syringe "Syringe" The durability of the "C" is a bit poor, and after about a year of use, cracking occurs.
Syringe itself is about 300 yen for a Single Item.
I think it is a good deal.
View detail
It can be used for motorcycles that are difficult to fill with engine oil!
This product can be used for motorcycles that are difficult to fill with engine oil. street triple has a narrow oil inlet area, so I use this product to fill it. View detail
ได้รับสินค้าตามรูปเลยครับสินค้ามีคุณภาพ View detail