Reviews
TS125R.
This is the Hose of the 2-st Oil.
This is the transfer section from the oil pump to the carburetor.
When cleaning the carburetor, the existing hose was replaced because it had broken due to deterioration.
I.D. 2mm was not found in any homestore or supply store.
View detail
For DIYCustom.
This is an unusual Size and will be useful for DIYCustomers. View detail
Attractive variety and low cost
Cost performance as a universal product is NO.1. View detail
Stop guessing and use this tool to set your oil level.
Easy to use, clear markings on the tube. My only complaint is that the tube and hosing can separate when attempting to push fluid out of the syringe back into the fork oil container too quickly and creates a mess. A small hose clamp might solve this. Another one of those tools you don't really need but makes the job of adjusting fork oil levels a no brainer. Between the dirt bikes and mountain bikes this will pay for itself and allow making adjustments much easier. And, if you can let your buddies borrow it if they buy the beer, it is a win win. View detail
Easy to use.
I bought this for servicing an acquaintance's Address, but bought a 46mm usable one to use for servicing MAJESTY 250.
The clutch can be easily disassembled and is firm and thick enough to be used safely.
View detail
(something) better to have
[How is it used?
Used for Fork oil change
Was the one you received as per Image?
Street Image
How was your experience with it?
Easy to use as it is a dedicated product.
The Measuring Cup sold at 100-yen stores has a wide spout that might overflow, so it would be less stressful to have a Measuring Cup.
[Points to note]
nothing special
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
It is better to have something like ForkSTAND so that you don't blunder the Oil that you have poured. Especially for those who work alone.
View detail
Fits: HONDA Superdio, HONDA Dio (2 Cycles), HONDA livudio
Nice and high quality bolt
Very high build quality. The material also stainless steel and nice looking. Recommended for replacement and upgrade. Beautiful product for your great bolt and disc. View detail
For air venting
Air can be easily removed by maintenance of the brake.
Air can be released easily and efficiently.
Oil Resistant Hose is also included, which is helpful.
View detail
It can be used for motorcycles that are difficult to fill with engine oil!
This product can be used for motorcycles that are difficult to fill with engine oil. street triple has a narrow oil inlet area, so I use this product to fill it. View detail
ได้รับสินค้าตามรูปเลยครับสินค้ามีคุณภาพ View detail
No problems
Used for GEAROil cap, normal use. View detail
Use of different tools
This Torque is available in a variety of sizes.
You can turn even the tightest places that cannot be turned.
It also supports Torque with the middle of the Bolt sticking out.
The Band at the base of the AXIS Labs Slip-on Silencer can be turned without removing the Cowl.
View detail
I'm just saying it's easier to do without.
I used it on a Clutch Wire that had become reluctant. I'm not sure if it's a good idea, but I think it's a good idea. It's a must have for me because I'm a bit of a pain in the ass. It is a must have for me as it is very cost effective. View detail
Suitable for a wide range of sizes
It is convenient to use for a wide range of sizes for the Hose of WaterLine and Fuel line. It can be tightened firmly and can be used without worrying about liquid leakage. It is easy to tighten and loosen the Hose Band with its excellent workability. View detail
It's easy to use, but you'll start sweating from the Hose part soon.
Purchased in conjunction to get in tune.
It was easy to use, but it makes me sweat right out of the hose area.
I'm not sure if the Hose is properly Gasoline resistant.
It's not a problem, though, because I don't use it often.
View detail
It keeps the work area clean.
There are two types of Axel warmer, one to pull and one to put back, and by all accounts there's no gap to point the Nozzle through, so I think this is now a necessity, whether it's WAKOS, CRC, or whatever it is, it's a necessity for a motorcycle that's out in the field. View detail
Weight roller replacement
I used it to change the weight roller and it was my first time to do so, but it was done
However, I won't be using it for the time being
As a Sunday mechanic, this is good enough for me
View detail
Knkikaku
Yes, simple work can do many measurements. Yes many versions Meet the needs of people who are not comfortable to work hard. View detail
Jungle
Yes, it is easy to do many measurements, with precision, can easily find fit. Can measure cc Mm can be measured inexpensive, yes, many jobs. View detail
KN Mikuni
Yes, it is easy to do many measurements, with precision, can easily find fit. Can measure cc Mm can be measured inexpensive, yes, many jobs. View detail