Reviews
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125S
Size is Exactly but
I ordered this to replace an Air cleanerFilter that was falling apart due to hydrolysis without my knowledge.
I wasn't sure how much filter oil (sold separately) to apply, so I applied the oil as I usually do on off-road motorcycles, but it seemed to be too much, and air cleaner oil spit out from the silencer for a while.
There is no way to go wrong with the installation.
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Air filter replacement
The product was full of dust and considering the application, I will still go with OEM Parts next time. View detail
I replace it every 20,000 km.
Reached 20,000 km since the last replacement. I bought this one again after the last time because it is the lowest price among the Net purchases according to my own research. I bought this one again, but this time the area of the filter was a little smaller than the previous one, which may be due to cost reduction. The installation was smooth and the precision of the others was good. View detail
It's neither good nor bad
Ordinary Sponge type Air Filter
However, the price is lower than OEM parts, and since it is a dedicated product, it comes on properly without any defects.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125SF, HONDA MSX125, HONDA MSX125SF, HONDA MSX125
Chosen to match the situation.
This is the second replacement at 36,000 km.
I was hesitant to try the high flow type, which is more expensive but has better inhalation efficiency and removes garbages, etc., but in the end I chose the NORMAL paper filter.
The reason.
● Removing the Filter cover is quite a hassle (the method of removing the Horn, which is in the way, made the work progress).
● If you have removed the Cover, replacing it is faster and more convenient than cleaning it.
● Since it's a Touring Main, don't we need to be particularly concerned about intake efficiency, etc.?
And so on.
If you want to accelerate quickly in city driving, etc., you can use the High flow type I had chosen the
View detail
Good cosmetics, but the quality is not as good as the price.
OEM has a texture like ShopTowel, KN has a texture like a vacuum cleaner paper pack.
Compared to OEM, the wire diameter of WireMesh on the reverse side is very thin and I am concerned that it may be damaged by vibration or corrosion during driving.
It is safer to use OEM Product, especially if you ride in the rain.
View detail
PCX Air cleaner (Other Brand Product) for Repair
I am using a commercially available air cleaner for PCX on my ADV150.
Purchased for Repair.
Ignore the detailed dimensions as it was originally designed for the PCX and has been diverted to the ADV150.
However, I would like to mention one point of caution.
I couldn't tell because it's not in the picture, but it's only used for 90° bending.
I bought it but one side is twisted.
The twist could not be determined from the photo.
(Section is not vertical, about 85° and about 5° Up)
Please be careful when judging from the photo alone (although it can be used with some ingenuity).
View detail
Fits: HONDA BENLY50AA03, HONDA BENLY110JA09, HONDA LEAD110
The screw hole position is out of alignment with the OEM Product.
LEAD110 It was purchased with the mileage of 10,000 km, and Cleaner did not Check especially because it was said that it had been maintained.
I bought the Belt and Air Cleaner before replacing the Belt at almost 20,000km.
You have to remove the lid around the Rear Footpeg to open the Air cleaner, otherwise you can't turn the screw.
When I took it off, it was dirty, so I decided to replace it without cleaning it.
When the OEM Product is removed and this product is inserted, all of the screw holes underneath are only about half full.
I couldn't see it, but I just tightened it up.
I've driven about 300km and don't seem to have any problems.
View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX 300, YAMAHA XMAX300, YAMAHA XMAX300
If they're going to claim OEM compatibility, they should make it so it fits properly.
I bought this one because it's a high flow type, but unlike the OEM, it doesn't fit properly. It was supposed to be a 5 minute job, but it took quite a while. If you want to be OEM compatible, you need to calculate the dimensions properly. View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Buy it on the side
Before installation Ordered at the same time as the other parts No need to go to the motorcycle shop
I don't know the price difference with OEMs, but at this price, I'm sure it would be the same with a Large
View detail
Fits: SUZUKI address V125, SUZUKI address V125
It's a yellow color, so..
It seems to be almost the same as the OEM product in terms of price and performance..
The good thing about this product is that you can see how dirty it is at a glance because it is yellow in color Ugh
However, if you wash and reuse it, you may have to use the yellow color, which is a characteristic of the color yellow
You may be a little concerned about the remaining stains that didn't get removed
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
Cospa is preeminent
I exchanged the Air cleaner as well as changing the V100 Insulator.
When I tried putting it in, I got a bigger Large than the Air cleaner Box, and it got installed in a slightly pushed shape.
Since there is not much problem with the mounting itself, it was installed as it was.
I can not complain because it is cheap, but nervous people should buy OEM.
View detail
Although it usually thought that the raised face was an open air side, the raised face was a CARBURETOR side that I purchased. It is reverse?
Although it usually thought that the raised face was an open air side, the raised face was a CARBURETOR side that I purchased. It is reverse? View detail
Fits: YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
It is 1-time throwing away in case of a pure dry type filter. It could wash, when it was this filter, and it could consider that a belt is carried out using 3 or 4 times, and purchased. It can wash, although an aim is bingo and the four corners of
It is 1-time throwing away in case of a pure dry type filter.
It could wash, when it was this filter, and it could consider that a belt is carried out using 3 or 4 times, and purchased.
It can wash, although an aim is bingo and the four corners of yellow sponge are pasted up firmly.
Since washing may not be assumed, it becomes self-responsibility.
If sponge worsens, it will also be possible to cut and divert the tabular filter sponge of a general-purpose article.
Although it is with a power up type, probably, a physical feeling is a range with error.
View detail