Reviews
Fits: YAMAHA BWS (Bewith), YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), SYM RX100, YAMAHA Majesty 125, YAMAHA Grand Axis
Rear brake, which has a reputation for being ineffective, works better.
I installed it on a MAJESTY125Fi.
This car model is Rear brake is not working well." I have always thought so, too, but when I replaced it with this Brake Shoe, it works wonderfully.
Moreover, it does not work with a bang, but smoothly, so there is no anxiety when breaking.
Brakes are the lifeline of safety when riding a motorcycle, and I would highly recommend them to anyone who rides the same type of vehicle.
This performance should give you such peace of mind that you honestly can't believe the price!
I have not felt any wear and tear on the Brake Shoe, but I have heard that a good-performing Brake Pads/Shoes are subject to severe wear, so I gave it a 4 star rating for that reason.
View detail
Fits: YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO, YAMAHA VINO
Expectations for corresponding products
I have received a response from Manufacturer, so I am adding this.
The defect was confirmed and returned Gold response.
It does not seem to be structurally designed to cause operational problems depending on the car model, so I am sure that this will be addressed when the product is next released.
I am attaching a photo for your reference.
View detail
For ScooterAir Filter
I used it on a Honda 50cc dunk. After the replacement, the engine sound is lighter and fuel consumption has improved by about 5 km. The price is low, so I will replace it regularly. View detail
OEM Product No. Due to Discontinuation
After warming up, start running and EngineStall.
The fire is not flying, so I replaced the CDI, but it does not hang Engine.
I did a fuel check and Gasoline was not coming.
I thought it was a fuel pump, so I replaced it.
When I re-button the Pump later, it catapulted.
When I saw the Filter when I was doing the Pump exchange.
Black with rust from Tank. perhaps a clogged Filter?
That's why I bought it. The middle one is the OEM Product that was replaced a year ago and has probably been without replacement for over 30 years (lol).
The one I used for the past year is not shown in the picture because I cleaned it and still use it since I didn't have any parts on hand (lol).
As you can see, it has the same shape as the OEM Product.
It is fastened with an elastic band, and the installation is secure.
OEM Product is probably discontinued, so thanks for the Large change.
By the way, a year ago, the fuel TubeQuantity:The Set also included a Filter, but it is already out of date.
I thought the rust on the tank was pretty much gone.
I had no idea it was still in Filter.
From now on, I'll be changing Filters regularly (laughs).
View detail
Not a problem at all!
Used for pcx jf81. I replaced the OEM Product that came with my pcx jf81 with the KN product since the car had already reached 20,000 km since it was new. It is cheaper than OEM and I would like to buy it again. View detail
Cute! That's all!
Durability is unknown as time has not yet passed. The color is cute. Nothing more, nothing less. View detail
PCX Air cleaner (Other Brand Product) for Repair
I am using a commercially available air cleaner for PCX on my ADV150.
Purchased for Repair.
Ignore the detailed dimensions as it was originally designed for the PCX and has been diverted to the ADV150.
However, I would like to mention one point of caution.
I couldn't tell because it's not in the picture, but it's only used for 90° bending.
I bought it but one side is twisted.
The twist could not be determined from the photo.
(Section is not vertical, about 85° and about 5° Up)
Please be careful when judging from the photo alone (although it can be used with some ingenuity).
View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
perfect fitting!
It was used to restore and refit mufflers I like the perfect fit. The material was good. I want to recommend it. thank you. View detail
Fits: YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO, YAMAHA VINO
Disappointing work.
Stop-lamp is malfunctioning.
The size of the slit through which the brake wire passes is 5mm longer than OEM, and the stop-lamp switch is stuck there and cannot be pressed properly.
As it is, it cannot be driven on public roads.
We are currently inquiring with the Manufacturer.
View detail
Defective item
The molding of the product is poor, and even when the lid of the box is closed, there is a gap, so the air intake leaks, making the product noisy and unusable. View detail
Fits: YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO, YAMAHA VINO
Completely self-serving lol.
To be frank, I don't know who would spend such Gold on Drum brake's APRIO, but I bought it on impulse.
Texture quality is very good.
That's all there is to it.
It is not different from OEMLever in terms of weight reduction or grip feel.
However, the product box is also luxurious and self-fulfilling.
That's all there is to it.
The cospa is the worst, but the custom feeling is meh!
View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
Used on Address, which had been abandoned for 2 years.
[How is it used?
I used it on an addressv125 (k5) that had been neglected for 2 years.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Simply remove the air cleaner box attached to the outside with the Driver.
How was your experience with it?
The Filter that was originally attached to the box was so tattered that it was almost Filter-less. The tube-like thing inside was also disconnected inside the box, and it was in a strange state of large. Maybe it was the tube or the air filter that made the acceleration so unstable, but after changing the filter, it was completely gone. I am satisfied.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Cheaper with OEM Equivalent Product!
I am purchasing Repeat for my PCX (JF56).
This time, it was replaced together with an overhaul of the drive train (total replacement) as it had reached 50,000 km.
The last time it was replaced was around 25,000 km, so it was replaced at 25,000 km.
It was cheaper than OEM, and even after running 25,000 km, I had no problem at all in starting, acceleration, fuel consumption, etc. (I did maintenance by opening the cleaner box and blowing out the filter's garbage with air every 5,000 km). (Maintenance was done by opening the cleaner box and blowing out the filter's garbage etc. with air when changing the oil every 5,000 km.)
Cost performance is very good and we recommend it.
View detail
Fits: SUZUKI Address 50, YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog Deluxe, YAMAHA Jog Deluxe, YAMAHA Remote control jog, YAMAHA Grand Axis, YAMAHA Jog ZR, SUZUKI Address 110, SUZUKI Address V50 (4-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI RM80, YAMAHA Remote control jog, SUZUKI Address V100, SUZUKI Address 50, SUZUKI RM85, SUZUKI RM80, SUZUKI zzz, SUZUKI address V125, SUZUKI Vexter 150.
This is good again.
It seems to be better than OEM? I think it might be better than OEM, but it is a reliable manufacturer, so I could install it with confidence. It works perfectly. View detail
You can replace it once a year. I'll get my change." Good cosmetics that seem to be
I am wearing YOSHIMURAR77 on my Z125. On single-digit national highways and main roads, the car is virtually running at full throttle. The plug is just right with MOTODX #8. It is a cosmetic and performance filter that can be replaced once every 6 months. View detail
Fits: YAMAHA Cygnus X Model 5 Taiwan Spec B2J, YAMAHA Cygnus X Model 5 Domestic spec B8S, YAMAHA Cygnus X Model 4 Taiwan Spec 2UB, YAMAHA Cygnus X model 4 domestic spec BF9, YAMAHA Cygnus X Model 5 Taiwan Spec B2J, YAMAHA Cygnus X Model 5 Domestic spec B8S, YAMAHA Cygnus X Model 4 Taiwan Spec 2UB, YAMAHA Cygnus X model 4 domestic spec BF9
Good and inexpensive price
I was going to buy OEM because the Throttle was not working well, but I found this product a little longer and less expensive and bought it.
I was worried about the quality because of the low price, but I am glad that it moves well and is well made.
I had to rosette it quite a bit to replace it, but I was able to install it with no problems.
By the way, the vehicle we installed it on is a bws125 type 2.
I had changed my High Solo for CYGNUS and the OEM was a little short, but I replaced it with this and it is just the right length.
for your reference
View detail
Fits: Others Universal
EssentialItems when Big carburetor is installed on ZOOMER
When we installed the Big carburetor from Other Brand Product on our ZOOMER, we needed to replace the Throttle Wire as well. I measured the required length and found it to be close to 170 cm.
First of all, no matter how much information you have, there are many cases where you can't know about this kind of Items without checking the actual vehicle. In my case, I was not sure what to do because I had an extra Cable if I used the same arrangement as the OEM Cable. As a result, I rerouted the cable to the Right Side at the Neck of the Frame (the side in front of the Fuel Tank) and used the opposite cable routing from the OEM, and the length was about right. If the Cable is too tight, it may cause stress on the Cable and prevent it from operating smoothly, so I think it is better to have a little extra room.
View detail
Fits: SUZUKI Address V100CE11A, SUZUKI Address V100CE13A
Because it is boring for OEMs.
I knew about Cost performance and Quality as I have used them in my own LIVE DIO, so I bought them.
It is a little more expensive than OEM, but I am satisfied with the teased look.
The OEM Product that was originally attached had deteriorated and was falling apart at the touch of a hand.
Power upetc. I can't experience it, but I will buy it again next time.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Purchase Repeat
I originally used Shoe from KN Planning.
I remember that the product worked much better when I changed from OEM Product, so I decided to change it this time as well.
I did the same KN project.
As you can see in the second, the sLid has changed a lot.
The third has been used for about 22,000 km and has not decreased nearly as much.
However, the adjustment screw had to be tightened quite a bit to get it to work, so I had to replace it.
The efficacy is still quite good.
The Rear brake alone can slow down the car considerably, although I have not yet locked it.
It is a Type that applies a lot of basic Rear.
I don't know about other Manufacturers, but I recommend this Shoe.
View detail
Cospa best
[How is it used?
Purchased for maintenance of ADV150 purchased used (approx. 6,000 km).
The back Gold mesh is removed and installed to increase inhalation efficiency.
At the same time, the air intake Hose was replaced for PCX150 (KF30). Aiming for high speed extension.
Was the one you received as per Image?
No difference from OEM Product. Durability will be verified in the future.
How was your experience with it?
No problems. The OEM (originally attached) is kept for sale, as I want to do some processing on it.
[Points to note]
nothing special
How did it compare to other products?
Cost-effective because it is the same as OEM (1/3 of the price OEM)
View detail