Reviews
Fits: SUZUKI CARNA, SUZUKI Shot, SUZUKI high-R, SUZUKI Address50, SUZUKI AddressWAY, SUZUKI High, SUZUKI LETS II-L, SUZUKI AddressEX, SUZUKI LETS II-S, SUZUKI LETS II, SUZUKI LETS II-Combination brakes, SUZUKI LETS-DX, SUZUKI LETS-L, SUZUKI LETS II, SUZUKI LETS II, SUZUKI LETS-G, SUZUKI ZZ(ZZ), SUZUKI LETS, SUZUKI VERDE, SUZUKI LETS4 Palette
Some older Suzuki scooters that are included in the list of compatible models may not be able to be used.
I have a SEA BASS ScooterLOVE and ordered this as a replacement part because the rear brake shoe is worn out.
However, when I lined up the delivered item with the removed shoe, it was clearly unusable because it was almost 1.5 times larger than the original.
This is not an evaluation of the performance of the Brake Shoe itself, but it is a review for all users of this type of older Scooter.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NS50F, HONDA MBX50, HONDA CRM50, HONDA CRM80, HONDA MONKEY, HONDA GORILLA, HONDA Monkey Baja, HONDA MONKEY R, HONDA MONKEY RT, HONDA DAX50, HONDA DAX70, HONDA JAZZ, HONDA MAGNA50, HONDA CHALY 50
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
Fits: HONDA BENLY50AA03, HONDA BENLY110JA09, HONDA LEAD110
OEM Product and Size are different
The size is larger than the OEM Product, and it cannot be installed without modification. I cut the plastic frame part by 5mm with a cutter knife and re-drilled the screw holes. View detail
Fits: SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI VECSTAR150
Could not be used (not available for evaluation)
Purchased with the intention of installing on a VECSTAR 150, which is a compatible model.
However, when this product is installed, Tire cannot be installed,
We had no choice but to revert to OEM.
I have not been able to use it, so I can't say for sure, but I will write my impressions.
Perhaps, but I wondered if it was necessary to shave a few millimeters off.
It may be something to shave off a little first,
Is it possible that the lid will not close without shaving? Is it possible that the lid will not fit?
Compared to the OEM, I thought the Size was a bit Large.
I should have taken a comparison photo with the OEM, but I forgot to do so.
I would like to compare them next time I change Tire. (It will be a few years later)
Also, Spring is so much stronger than OEM.
The Level is such that it cannot be extended by hand. (Sorry for my inability.)
Does the strength of this Spring lead to the braking power of Brake?
Simply put, I found Spring to be twice as strong as OEM.
View detail
Fits: YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO, YAMAHA VINO
Disappointing work.
Stop-lamp is malfunctioning.
The size of the slit through which the brake wire passes is 5mm longer than OEM, and the stop-lamp switch is stuck there and cannot be pressed properly.
As it is, it cannot be driven on public roads.
We are currently inquiring with the Manufacturer.
View detail
Defective item
The molding of the product is poor, and even when the lid of the box is closed, there is a gap, so the air intake leaks, making the product noisy and unusable. View detail
in two equal parts
I tried to fit the air filter into the FilterBOX.
The air filter I purchased was deflected, and when I fixed the deflection by hand, the air filter I purchased broke in half. (Angry) 。
I realized that cheap products are Red if you buy them.
View detail
Fits: HONDA LEAD 50, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOSR, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC, HONDA DIO CHESTA
Size does not fit, the inner diameter of 28mm is Quantity:2pc. It was in Set.
The Size doesn't match, and the reply to the inquiry email is slow and troublesome.
I still think you should buy OEM Parts! I think.
View detail
Fits: HONDA Lead 50, HONDA CL50, HONDA LEAD 50, HONDA LEAD 50, HONDA LEAD 50, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOZX, HONDA LIVE DIOSR, HONDA LIVE DIOSR, HONDA BENLY50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA BENLY50S, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA SUPER DIO, HONDA SUPER DIO
Will not fit NPS50 Ruckus
Does not fit the Ruckus, and is not an OEM replacement. North American buyers please be careful. The bottom lever shown in the image is the KN Planning lever, and the top lever is the original which I was trying to replace as it is broken. The width of the lever is incorrect, and as a result the brake light switch does not get turned on/off correctly. This will cause your brake lights to be on at all times, which is a safety hazard to say the least. View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
exhausting and wasteful
Gasket into Manifold, but obviously the thickness is not enough to prevent exhaust leaks.. With a bad feeling, I installed the gasket and started the engine, but as I expected, there was an exhaust leak I had no choice but to use the OEM gasket and start the engine again I've purchased KN Planning's products several times and was rather relieved, but this Gasket was the worst View detail
Fits: SUZUKI OB50E, SUZUKI love, YAMAHA Axis 50, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA Excel, YAMAHA gear, YAMAHA gear, YAMAHA gear, YAMAHA champ, YAMAHA try, YAMAHA Grand Axis, YAMAHA Super Jog ZR, SUZUKI GN50E, SUZUKI RG50γ, SUZUKI TS50HUSTLER, SUZUKI ADDRESSV125, SUZUKI WOLF50, SUZUKI CARNA, SUZUKI Shot
Not for Address V125G
It has a very small height in comparison with the OEM gasket. Due to the poor sealing exhaust gases are pulled outwardly. View detail
Ideas are good, but
As a result.1pc. nor did it complete the work. the TireValve was moved directly up (vertically) I'm not going to be successful with the quality of this tool because I can't pull it If you don't increase the rigidity of the tool, there is a risk of injury from the recoil If you can increase the rigidity of the tool by yourself, you can use this Ideas tool View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
It is used for the address V100. Although it is two layers, coarse Sakka and fine Sakka, similarly and expected that it was pure comparatively [ with a cheap price ] ... Although it may be individual specificity, a size is [ more than round ] large, a
It is used for the address V100.
Although it is two layers, coarse Sakka and fine Sakka, similarly and expected that it was pure comparatively [ with a cheap price ] ... Although it may be individual specificity, a size is [ more than round ] large, and it will be distorted if it puts in.
It is the shin without liking to use for its own motorcycle, although it can use.
It is wonderful in why a size is different like this.
Probably, it is not cutting manually.
Although the construction material of an element is a thing which does not seem to be so bad, since a size difference is decisive, it is the minimum evaluation.
View detail