Reviews
Fits: HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA joker, HONDA Johno., HONDA Julio., HONDA Dio XR Baja, HONDA cabina, HONDA Cabina 90, HONDA Joker90, HONDA Dio AF18, HONDA Super Cub 90, HONDA broadcloth
Chamber replacement
I used it with LEAD 90.
It worked fine with no exhaust leaks.
I don't need three but bought them because they were cheap.
View detail
Cost-effective and easy to work with OEM Type!
[How is it used?
・ I used it for the first exchange.
How was your experience with it?
・ Response might have improved.
How did it compare to other products?
・ Low cost, but looks the same, so you can exchange it as soon as possible!
[Points to note]
・ During the replacement, the Blowby inspection and the cleaning of the Air cleanerBoX must be carried out at the same time!
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
No problems
Used for GEAROil cap, normal use. View detail
Fits: YAMAHA BWS (Bewith), YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA Majesty 125, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith)
Works fine. Durability is also good.
The feel of the product is the same as the OEM. View detail
You can't usually see it.
I don't know if the Filter is more effective than the OEM, but it seems to do a good job. It has a large hole and a small hole, but I think the small hole will prevent it from gapping and the filter cover will hold it in place. View detail
Scooter's Filter is not washable.
This type of Element cannot be washed and reused due to its structure.
I don't mind because it's cheap at all.
[How is it used?
I'm using it on my PCX125, it's a 2012 model with about 18,000km on the odometer. It's not that it's in bad shape, but I decided to replace all the consumable parts once, so I replaced the other parts along with the drive train. I did it for the first time and it was very easy.
How was your experience with it?
Carburetor Vehicles can make a difference, but I didn't feel that much of a difference, perhaps because it was an injection vehicle.
Well, I guess it's the peace of mind that comes from knowing that the car is being properly maintained.
How did it compare to other products?
The difference is obvious when compared to other products, but not the old ones.
You're disgusting.
[Points to note]
I know this is Element in general, but it's a pain to throw away the old Element that you replaced, because the Gold genus part is completely integrated and it looks like you can't disassemble it without destroying it.
While you're at it, clean the inside of the Air cleanerBox as well.
My PCX was full of soot in Blowby?
View detail
Fits: HONDA LEAD 50, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOSR, HONDA TOPIC, HONDA TOPIC, HONDA TOPIC, HONDA DIO CHESTA
Size does not fit, the inner diameter of 28mm is Quantity:2pc. It was in Set.
The Size doesn't match, and the reply to the inquiry email is slow and troublesome.
I still think you should buy OEM Parts! I think.
View detail
Attractive price, can be installed as well as OEM Product
Purchased because it is the lowest price.
It can be installed without any problem as same as OEM Product.
It is a consumable item so this price is very helpful.
View detail
PVAccelerator cable
I used it on my '93 NA12A EPO50.
Because Throttle Wire and Oil pump wire are divided into two halves in the middle, it is difficult to make Wire by oneself, so I really wanted to use EPO50 OEM Parts, but it seems to be discontinued, so I had no choice but to use it.
I thought that Throttle and Oil pump could be turned at the same time with this because it was delivered and it was two-way, and I was relieved, but the Pitch of the carburetor side of the Throttle Wire of the photograph did not match and it was unavoidable. I assembled it.
And now, since the part is for TS50 HUSTLER, it is too long for EPO50, so I thought what to do, and I had to choose whether I should turn it around or cut it. After fitting the Oil pump wire and Throttle wire, I turned the bottom of Seat, and put Handlebar to Quantity:Pair (for Left and Right) I assembled it so that the pulling condition would not be bad by cutting it into
I was able to integrate it for now.
Then I started the engine and Idling was good and Axel opening and closing was good, but it looked a little worse.
Now you can shop at EPO50 again.
The result is not so bad, but if you want to imitate my work, please do it at your own risk.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125S
It's cosmetic.
It's a consumable item, so it's nice to be able to replace it easily without thinking about the cost. View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125S
It's cosy.
I chose this product because it is a consumable item and I can replace it easily and cosmetically. I think it is necessary and sufficient. View detail
Fits: HONDA GROM, HONDA GROM, HONDA GROM
สินค้าส่งใด้รวดเร็ว คุณภาพดี ตรงตามที่ ที่สั่งไปงานสวย View detail
Fits: HONDA BENLY50AA03, HONDA BENLY110JA09, HONDA LEAD110
The screw hole position is out of alignment with the OEM Product.
LEAD110 It was purchased with the mileage of 10,000 km, and Cleaner did not Check especially because it was said that it had been maintained.
I bought the Belt and Air Cleaner before replacing the Belt at almost 20,000km.
You have to remove the lid around the Rear Footpeg to open the Air cleaner, otherwise you can't turn the screw.
When I took it off, it was dirty, so I decided to replace it without cleaning it.
When the OEM Product is removed and this product is inserted, all of the screw holes underneath are only about half full.
I couldn't see it, but I just tightened it up.
I've driven about 300km and don't seem to have any problems.
View detail
Fits: SUZUKI Address 50, YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog Deluxe, YAMAHA Jog Deluxe, YAMAHA Remote control jog, YAMAHA Grand Axis, YAMAHA Jog ZR, SUZUKI Address 110, SUZUKI Address V50 (4-stroke), SUZUKI Let's 2 (2-stroke), YAMAHA Remote control jog, SUZUKI Address 50, SUZUKI zzz, SUZUKI RM85, SUZUKI Address V100, SUZUKI RM80, SUZUKI RM80, SUZUKI Vexter 150., SUZUKI Vexter 125
Reliable Braking Power
The quality and braking power is the same as NORMAL Brake Pads, easy to handle and safe to use. Extremely cheap Brake Pads are not usable because they affect the braking power like Large, but the price is not so high and there is a sense of security over OEM and the same etc. products. View detail
Suitable for a wide range of sizes
It is convenient to use for a wide range of sizes for the Hose of WaterLine and Fuel line. It can be tightened firmly and can be used without worrying about liquid leakage. It is easy to tighten and loosen the Hose Band with its excellent workability. View detail
It's essential for air extraction.
This air bleeding tool is essential for the maintenance of hydraulic brakes and hydraulic clutches. It is easy to use with Oil Resistant Hose. View detail
No problem at all
Replaced OEM with this product this time.
It's inexpensive and I haven't had any problems using it at all.
View detail
Fits: YAMAHA CYGNUS X1 5UAFOR JAPAN MODEL, YAMAHA CYGNUS X1 Type 5TY Taiwan, YAMAHA kygnus x2 type 28sfor japan model, YAMAHA CYGNUS X2 Type 4C6 Taiwan, YAMAHA CYGNUS X2 Type 1CJ Taiwan
It's a pain in the ass to replace.
With the OEM Equivalent Product, there is no sense of discomfort at all in the feeling of use.
Replacement is a hassle, but it's cheap and can be done at an early Cycle.
View detail
Universal Air Element Sponge
It is convenient because it can Cut freely. View detail
I thought it was from the KN project …
I wanted to get a Mesh filter from Taiwan MOS.
Not in Webig.
Buy this one.
But when I received it and looked at it, it was a Filter made by MOS?
It looks like it's being sold as a KN project.
I wish the images in the product listing had been posted by Package.
View detail