Reviews
Defective item
The molding of the product is poor, and even when the lid of the box is closed, there is a gap, so the air intake leaks, making the product noisy and unusable. View detail
Fits: HONDA Superdio, HONDA Dio (2 Cycles), HONDA livudio
Nice and high quality bolt
Very high build quality. The material also stainless steel and nice looking. Recommended for replacement and upgrade. Beautiful product for your great bolt and disc. View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
Used on Address, which had been abandoned for 2 years.
[How is it used?
I used it on an addressv125 (k5) that had been neglected for 2 years.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Simply remove the air cleaner box attached to the outside with the Driver.
How was your experience with it?
The Filter that was originally attached to the box was so tattered that it was almost Filter-less. The tube-like thing inside was also disconnected inside the box, and it was in a strange state of large. Maybe it was the tube or the air filter that made the acceleration so unstable, but after changing the filter, it was completely gone. I am satisfied.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
View detail
Fits: YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO, YAMAHA VINO
Completely self-serving lol.
To be frank, I don't know who would spend such Gold on Drum brake's APRIO, but I bought it on impulse.
Texture quality is very good.
That's all there is to it.
It is not different from OEMLever in terms of weight reduction or grip feel.
However, the product box is also luxurious and self-fulfilling.
That's all there is to it.
The cospa is the worst, but the custom feeling is meh!
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Cheaper with OEM Equivalent Product!
I am purchasing Repeat for my PCX (JF56).
This time, it was replaced together with an overhaul of the drive train (total replacement) as it had reached 50,000 km.
The last time it was replaced was around 25,000 km, so it was replaced at 25,000 km.
It was cheaper than OEM, and even after running 25,000 km, I had no problem at all in starting, acceleration, fuel consumption, etc. (I did maintenance by opening the cleaner box and blowing out the filter's garbage with air every 5,000 km). (Maintenance was done by opening the cleaner box and blowing out the filter's garbage etc. with air when changing the oil every 5,000 km.)
Cost performance is very good and we recommend it.
View detail
Fits: SUZUKI Address 50, YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog Deluxe, YAMAHA Jog Deluxe, YAMAHA Remote control jog, YAMAHA Grand Axis, YAMAHA Jog ZR, SUZUKI Address 110, SUZUKI Address V50 (4-stroke), SUZUKI Let's 2 (2-stroke), SUZUKI RM80, YAMAHA Remote control jog, SUZUKI Address V100, SUZUKI Address 50, SUZUKI RM85, SUZUKI RM80, SUZUKI zzz, SUZUKI address V125, SUZUKI Vexter 150.
This is good again.
It seems to be better than OEM? I think it might be better than OEM, but it is a reliable manufacturer, so I could install it with confidence. It works perfectly. View detail
You can replace it once a year. I'll get my change." Good cosmetics that seem to be
I am wearing YOSHIMURAR77 on my Z125. On single-digit national highways and main roads, the car is virtually running at full throttle. The plug is just right with MOTODX #8. It is a cosmetic and performance filter that can be replaced once every 6 months. View detail
Fits: YAMAHA Cygnus X Model 5 Taiwan Spec B2J, YAMAHA Cygnus X Model 5 Domestic spec B8S, YAMAHA Cygnus X Model 4 Taiwan Spec 2UB, YAMAHA Cygnus X model 4 domestic spec BF9, YAMAHA Cygnus X Model 5 Taiwan Spec B2J, YAMAHA Cygnus X Model 5 Domestic spec B8S, YAMAHA Cygnus X Model 4 Taiwan Spec 2UB, YAMAHA Cygnus X model 4 domestic spec BF9
Good and inexpensive price
I was going to buy OEM because the Throttle was not working well, but I found this product a little longer and less expensive and bought it.
I was worried about the quality because of the low price, but I am glad that it moves well and is well made.
I had to rosette it quite a bit to replace it, but I was able to install it with no problems.
By the way, the vehicle we installed it on is a bws125 type 2.
I had changed my High Solo for CYGNUS and the OEM was a little short, but I replaced it with this and it is just the right length.
for your reference
View detail
Fits: Others Universal
EssentialItems when Big carburetor is installed on ZOOMER
When we installed the Big carburetor from Other Brand Product on our ZOOMER, we needed to replace the Throttle Wire as well. I measured the required length and found it to be close to 170 cm.
First of all, no matter how much information you have, there are many cases where you can't know about this kind of Items without checking the actual vehicle. In my case, I was not sure what to do because I had an extra Cable if I used the same arrangement as the OEM Cable. As a result, I rerouted the cable to the Right Side at the Neck of the Frame (the side in front of the Fuel Tank) and used the opposite cable routing from the OEM, and the length was about right. If the Cable is too tight, it may cause stress on the Cable and prevent it from operating smoothly, so I think it is better to have a little extra room.
View detail
Fits: SUZUKI Address V100CE11A, SUZUKI Address V100CE13A
Because it is boring for OEMs.
I knew about Cost performance and Quality as I have used them in my own LIVE DIO, so I bought them.
It is a little more expensive than OEM, but I am satisfied with the teased look.
The OEM Product that was originally attached had deteriorated and was falling apart at the touch of a hand.
Power upetc. I can't experience it, but I will buy it again next time.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Purchase Repeat
I originally used Shoe from KN Planning.
I remember that the product worked much better when I changed from OEM Product, so I decided to change it this time as well.
I did the same KN project.
As you can see in the second, the sLid has changed a lot.
The third has been used for about 22,000 km and has not decreased nearly as much.
However, the adjustment screw had to be tightened quite a bit to get it to work, so I had to replace it.
The efficacy is still quite good.
The Rear brake alone can slow down the car considerably, although I have not yet locked it.
It is a Type that applies a lot of basic Rear.
I don't know about other Manufacturers, but I recommend this Shoe.
View detail
Cospa best
[How is it used?
Purchased for maintenance of ADV150 purchased used (approx. 6,000 km).
The back Gold mesh is removed and installed to increase inhalation efficiency.
At the same time, the air intake Hose was replaced for PCX150 (KF30). Aiming for high speed extension.
Was the one you received as per Image?
No difference from OEM Product. Durability will be verified in the future.
How was your experience with it?
No problems. The OEM (originally attached) is kept for sale, as I want to do some processing on it.
[Points to note]
nothing special
How did it compare to other products?
Cost-effective because it is the same as OEM (1/3 of the price OEM)
View detail
For air venting
Air can be easily removed by maintenance of the brake.
Air can be released easily and efficiently.
Oil Resistant Hose is also included, which is helpful.
View detail
Can use
Convenient to use for a wide range of corresponding Size for tightening of Hose.
It can be used with confidence because it can be tightened securely and there is no worry about liquid leakage.
It does not rust easily and can be used for a long time.
View detail
It can be used for motorcycles that are difficult to fill with engine oil!
This product can be used for motorcycles that are difficult to fill with engine oil. street triple has a narrow oil inlet area, so I use this product to fill it. View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125SF, HONDA MSX125, HONDA MSX125SF, HONDA MSX125
OEM Equivalent Product
Installed on a Grom JC61 early model.
OEM Equivalent Product, no problem.
View detail
in two equal parts
I tried to fit the air filter into the FilterBOX.
The air filter I purchased was deflected, and when I fixed the deflection by hand, the air filter I purchased broke in half. (Angry) 。
I realized that cheap products are Red if you buy them.
View detail
Securing flow rate
Used for TMR; Tank is PinGelSingle Silencer with Quantity:This is the best hose I've ever used because it's reasonable. View detail
Why are they wrapped in oil?
Is it more expensive because it is oil-resistant Sponge?
I didn't think it was already packaged with oil on it. I wonder if it's sturdy enough to be attached as is?
In the meantime, I re-dipped the oil for the air filter.
I applied the original FilterSponge and cut it into a slightly larger outline.
View detail
Fits: HONDA baton, HONDA baton, HONDA baton, HONDA baton, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA joker, HONDA Johno., HONDA Julio., HONDA Dio XR Baja, HONDA cabina, HONDA Cabina 90, HONDA Joker90, HONDA Dio AF18, HONDA Super Cub 90, HONDA broadcloth
Chamber replacement
I used it with LEAD 90.
It worked fine with no exhaust leaks.
I don't need three but bought them because they were cheap.
View detail