Reviews
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
It is a good item
No fuel leaks and very pleasant, it is painted in color and has a nice texture. View detail
OEM Product No. Due to Discontinuation
After warming up, start running and EngineStall.
The fire is not flying, so I replaced the CDI, but it does not hang Engine.
I did a fuel check and Gasoline was not coming.
I thought it was a fuel pump, so I replaced it.
When I re-button the Pump later, it catapulted.
When I saw the Filter when I was doing the Pump exchange.
Black with rust from Tank. perhaps a clogged Filter?
That's why I bought it. The middle one is the OEM Product that was replaced a year ago and has probably been without replacement for over 30 years (lol).
The one I used for the past year is not shown in the picture because I cleaned it and still use it since I didn't have any parts on hand (lol).
As you can see, it has the same shape as the OEM Product.
It is fastened with an elastic band, and the installation is secure.
OEM Product is probably discontinued, so thanks for the Large change.
By the way, a year ago, the fuel TubeQuantity:The Set also included a Filter, but it is already out of date.
I thought the rust on the tank was pretty much gone.
I had no idea it was still in Filter.
From now on, I'll be changing Filters regularly (laughs).
View detail
Securing flow rate
Used for TMR; Tank is PinGelSingle Silencer with Quantity:This is the best hose I've ever used because it's reasonable. View detail
Safe feeling of the same etc. as HondaOEM Product
This is the Fuel Hose! This is the best choice. View detail
KN Planning Fuel Filter 6mm
Great little filter, I prefer the paper filter because I think they filter finer material better than the screen type. Has a 6mm ID for small capacity fuel lines. Fits nicely because it is quite small - see the picture with a spark plug for scale. View detail
As the secondary side of the fuel Pump Hoose
Purchased as a Hoose pumping Gasoline from Fuel Pump to Carburetor He Gasoline and The OEMHose has cured and partially unraveled cracks and meshes, and also has been damaged by Yamaha's We were having trouble finding OEM parts for this product This product has a moderate flexibility, and as a pressure resistant gasoline hose, it has the thickness and It was installed with no problems It is very flexible, and even if it is bent a little, the cross-sectional area of the hose can be secured, so the fuel passage can be secured It was only 20cm long, but it is long enough to be about 1m long I think I will replace it with the rest of the hose as soon as possible As for the durability, I will see how it works View detail
Two-stage installation on Fuel Cock that won't stop leaking fuel
It is BETAtechno which was given by a relative, but packing of Fuel Cock deteriorates and the packing of the Fuel Cock is Fuel seems to flow to the cylinder even if the cylinder is turned off When the fuel doesn't stop, it is difficult to run the engine So I installed the Fuel Cock from KN Planning by Inline is not available
? What made you decide to buy? The price is low
? How was your experience with it? Definitely fuel stopping; the KICK is heavy, but it starts great
? Was it difficult to install? (In the case of hard parts) Just let them interrupt you with Inline
? What is the point or hang of installation (for hard parts)? It has a screw on it, but it was out of the groove when I bought it It needs to be checked
? How does it feel when you wear it and what is your height, weight, etc. (in the case of Apparel)? Any
? [Was there anything that disappointed you? Make sure the threads are in the grooves, otherwise they will not perform as they should
? Do you have any wishes or improvements you would like to make for the Manufacturer? None in particular
? [Do you have any products to compare it to? None
? [Others] Any
View detail
Used in 690DUKE (2012- )
It's a man-pole because it's not dedicated, but I tried to substitute it because the KTM OEM is more than 5,000 yen and expensive, but it's a problem None
I think I'll just buy this one in the future
Note that even after 2012, the filters are different for 6mm and 8mm by Timing
I had a 6mm, but I replaced it with an 8mm Pipe, so that's OK
View detail
How about durability?
Used for CRM 250 RK. OEM Standard 5. It is 3 × 125 and only 5 mm is Small diameter, but it is more secure than loose. Is installation severe or no problem. There is also a sufficient length even if you add the Filter and take Hose in a position where it can be fixed. View detail
To the maintenance of Injection car
Injection cars require Fuel Hose withstand pressure, but the means of obtaining it is surprisingly limited. It is very appreciated to be able to purchase easily in 1 m increments. Quality is enough and there is no problem with use for now. View detail
Is pleased
Fuel Hose is a product to be aged by all means year after year, Fuel Hose of My Motorcycle is now strong because it's a lifetime so it will be a little refined when Hose installs, so if you are looking for a good item
KN project Fuel Hose withstanding pressure Type φ 8 mm - 1000 mm I have found and used it, it is durable against pressure and I use a little refraction without problems, recommended one item
View detail