Reviews
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
Response revival of new cars
Installed on a YZF-R25 (8BK-RG74J).
It was installed without any problem, although there is no mention of a 22 or later MODEL in the compatible car models.
I didn't see any thin fuel reaction, and the amount of inhalation doesn't seem to have increased as described.
I feel like I'm getting a firm suck.
In OEM, if you use a lot of emblems and run for a long time, the oil in the blowback will give you a sluggish feeling.
With this less bellows high flow type, it is not so much of a concern.
I haven't driven the car that much since I replaced it, but so far the Response is the same as it was when it was new.
It seems like it's been going on forever. (It could just be my imagination.)
I think it's hard to see the effect for people who drive Main on flat streets.
I would recommend it to anyone who, like me, commutes daily on country roads with steep grades.
View detail
Easy air screw adjuster for 2-stroke carburetors
I'm using a 1995 Vespa px150 two-stroke. I replaced the bike's outdated carburetor with a Keihin pwk28 because it was too old. Due to the carburetor's confined location, it is quite challenging to adjust the fuel and air, particularly the air adjustment screw. The length of the screw body has increased since KN Aluminium CNC air screw was replaced, making adjustment considerably simpler. It's simple for me to manually change. In addition, KN's air adjustment screw is made of aluminum so it is very light, beautiful and has many colors to choose. So I might be thinking about using all the KN carburetor accessories to decorate mine. View detail
good price product
I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product.
I am very satisfied and intend to purchase again in the future.
I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. -------------------------------------------------- -------- I purchased it as a replacement for the genuine Benley 110. It's cheap, but you can't feel any difference from the genuine product. I am very satisfied and intend to purchase again in the future. I think it is advantageous to purchase multiple items. Thank you for selling a good product at a low price. Powered by Google Translator
View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
Cost-effective OEM alternative
When I bought a vehicle with about 50,000kn and maintained it, the powder that was Air cleaner was scattered in the box, and I bought it in a hurry.
I didn't care about Performance in a commuter car, so I bought this one which is superior in cosmetics.
Sponge Filter is a bit oily and should be touched with gloves.
The shape is also Exactly on V125S.
I don't know the effect since it is a regular replacement part, but both idling and blow off are smooth and I didn't feel any special effect on power.
It seems to have a long life if it is inspected occasionally and dust is blown off with air blow and oil is given.
View detail
Affordable price and usability!!
This is a great item for tuning while using a genuine air cleaner box. When additional air is needed while using the original filter, increase the air volume with a simple operation! It is useful when you purchase extras and make more detailed settings. View detail
Fits: YAMAHA JOG, YAMAHA JOG90, YAMAHA AXIS 90, YAMAHA VINO, YAMAHA SUPER JOG ZR, YAMAHA GRAND AXIS 100, YAMAHA SUPER JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA NITRO50, YAMAHA BWS100, YAMAHA AEROX50
The quality is excellent
I replaced it after using a Chinese product that was too cheap. I am satisfied with everything from packaging to product finishing and component performance. Detailed settings are also supported with the extra components included. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Used for SE461
[How is it used?
The MOS Crankcase Filter I had been using was very dirty and Timing was good and I was able to get a good price at Webike's OutletSale, so I decided to replace it. Thank you very much. The price range is just right for when you are one step closer to free shipping.
Was the one you received as per Image?
It is the same Gold Genus Mesh that we have been using.
The color is now gold and a little more shimmering.
Usually, it fits within the Case, so it is no different, but when it is bare, it may be a bit Fashion.
Was the installation difficult?
The pure Normal Thread Screw that is installed is a Plus screw, so it will be Large sturdy if you are careful not to lick it.
It is good to install the stopper by aligning the large hole in the middle with the small hole that serves as the stopper, so that it will not gap.
How was your experience with it?
Since it is not Sponge like OEM, it does not deteriorate and become tattered, and I prefer Gold Genus Type.
Since this is a part that gets a lot of heat, I thought that the Gold genus would be better in terms of durability.
The air duct was sucking in Sponge, but the filter is preventing foreign matter from getting into the Crankcase. The fine mesh is good.
[Included Parts:were they on?
Not particularly
The Package was double packed and carefully packaged.
View detail
Fits: YAMAHA BW'S125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BW'S R
I'm glad I bought it LargeSatisfied ^^.
After all, Brand is reliable. "KOSO !
The mani was also, but the production is outstanding!
The OEM's Throttle position sensor hole position is also Exactly "Scauper." It was added as follows.
The test ride felt like a fat Torque in the mid-speed range.
On the other hand, the start of the song seems to be a little mousy...
I think 32 pie is a little too large for Standard Bore, but I have a plan to bore up in the future, so I'll take it as a good thing ^^.
The maximum speed has not been tested yet and will be in the future.
And one thing I noticed is that the Axel opening seems to be larger than NORMAL...
Maybe it's just my imagination ^^;.
I was extremely satisfied with the product in any case ^^.
View detail
To Restore.
Used for MAJESTY 125 Restore.
Many used co-MAJESTY vehicles have been driven around and have never been replaced since they were new,
My vehicle was also quite dirty and the Level was likely to adversely affect the intake air, so I replaced it.
There is not much difference in the physical experience, but there is no harm in thinking that you have bought peace of mind.
View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 G, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125 Limited, SUZUKI Address V125S
jancarlo
very good service and excellent parts..Thanks to Kitaco for making a very good quality strap. I recommend it to all those who love good products from the Kitaco brand. And ...also thank the kn brand for the quality of their product very good filter sponge to cover the dust View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA AIRBLADE125, HONDA SHMODE, HONDA PCX125, HONDA PCX125, HONDA Click125I
Good thing I switched!
[How is it used?
Bought this for my PCX125. I had not replaced the air cleaner since I bought it used, so I decided to change it.
How was your experience with it?
The replacement itself was very easy, just remove the 7 bolt cover where the air cleaner is and replace it as is. I ran the car after the replacement and I can't tell the difference as a layman, but I feel like the PCX is more energetic now.
It looks rather good, and although you can't see it once you put the Cover on, I like it.
The price is not that much different from OEM, so I am glad I replaced it.
Please feel cheated and see if you can change it.
How did it compare to other products?
I think it has a little more power than OEM. I don't know much about it.
[Points to note]
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Cospa is nice.
I bought this one because it was cheaper than OEM Product, but it is a very good product because it can be used normally! View detail
Fits: YAMAHA jog, YAMAHA vino, YAMAHA vino, YAMAHA JOG Injection Vehicles
Air Element
My Vino is a 50cc 2007 model the KN Planning 4st JOG / NEW VINO Air Element (Stock Type) I bought is perfectly fit and looks good. View detail
Used in PWK28
The OEM PWK28 is hard to turn and looks bad with plastic, so we used this one.
I am satisfied that it turns easily by hand.
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Totally comparable to OEMParts
Used on PCX125 (JF56). It is a great product for a small student who regularly replaces the parts after 10,000Km. View detail
Fits: その他 , YAMAHA GRAND AXIS, YAMAHA BWS100(BWS)
Good Upgrade Filter Box
Good Tuning Air Filter when you drive Racing Cylinder and bigger Carb. I could fit a bit better but more important is that you get more air and its not to loud View detail
No problem even with the lowest priced product.
It is used for PCX150KF30.
I bought this one last time and was able to install it with no problems, so I Repeat it for Stock.
The replacement is done every 10,000 km or so, but since it is a consumable item, the low price is a big help.
The photo shows the same object from the previous work.
View detail
If you want to buy one, this is the one!
Motorcycle bought used2,801 km
It is a replacement from OEM that has probably never been replaced.
It's a coarse-feeling dishwashing Sponge, but I think it airs out pretty well.
Above all, the Cost performance is so great that I will Repeat again.
View detail
When out of print.
The OEM was discontinued, so we substituted it.
It has been used normally with no change.
View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX 300, YAMAHA XMAX300, YAMAHA XMAX300
Cheaper and better than charging
I had just been recommended a replacement at the Shop, and since it was less expensive than OEM, I purchased it. View detail