Reviews
![Main jet set 6 piecesQuantity:Set[Mikuni Maru Small]](https://img.webike-cdn.net/catalogue/images/124968/08082320_64d24f1dd25d5_TS.jpg)
Fits: SUZUKI DR400Z, SUZUKI BANDIT1200S, SUZUKI BANDIT1200, SUZUKI INTRUDER800Classic, SUZUKI SV650S, SUZUKI GSX-R750, SUZUKI INTRUDER400Classic, SUZUKI SV650, SUZUKI SV400, SUZUKI SV400S, SUZUKI GS400, SUZUKI GRASS TRACKER Big Boy, SUZUKI BANDIT250 V, SUZUKI VOLTY250, SUZUKI VOLTY250T, SUZUKI GRASS TRACKER, SUZUKI VANVAN200, SUZUKI BANDIT250, SUZUKI AVENIS150, SUZUKI VECSTAR125
GRASS TRACKER BIGBOY
BIC BOY's main jet was quite old, so I changed it.
I'm a novice, so I'm going to do my best, even though setting and large is a little bit strange.
View detail
Fits: YAMAHA gear, YAMAHA box, YAMAHA Box, YAMAHA NEWS GEAR, YAMAHA GEAR
Purchased for Yamaha VOX50 maintenance
I bought it to replace all consumable parts including filter and Oiletc. because I got it from an acquaintance. I was able to purchase all the parts at once, so the motor runs smoothly and smoothly. View detail
Fits: SUZUKI Address V125G, SUZUKI Address V125G, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
under the influence of price
I bought it because the price was low.
It is a consumable item, so I am very grateful that you sell it at such a reasonable price.
View detail
It is something that Oil is soaked in, but it is sinking a little short.
Replacement of LETS4, work time is about 15 minutes with a single Phillips Screwdriver.
It takes about 30 minutes to clean up the gooey soot, etc.
Should be purchased at the same time when replacing the adjacent CaseElement.
I did so this time.
This is the one that is stained with Oil, but the sinking is a bit unsatisfactory. I would expect to be able to touch it with my fingers and get it wet, but it was almost dry to the touch.
The rest are fine, a little on the Large size and sticking out.
View detail
usually
KITACO didn't fit perfectly, but
This one fit perfectly with precision.
Air cleaner probably won't make a difference in fuel economy no matter which one you use.
Self-realization.
If you want to increase fuel efficiency, the most effective
EngineRose and clean up.
I think it works best.
Changing the air cleaner did not improve fuel efficiency.
When you go 100,000 km, it's a good idea to increase fuel efficiency.
EngineRose and replace valves.
Piston ring Replace all likely wear areas
I don't see a dramatic change in fuel economy without it.
View detail
Fits: HONDA GROM, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA MSX125, HONDA MSX125SF
More intake than OEM.
It is more aspirated than OEM, or it is better out of the box. View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA TMAX500, YAMAHA TMAX530, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT03, YAMAHA YZF-R3
For MT-25
I purchased this air filter for my MT-25, which is equipped with OVER's Full Exhaust System, so I wondered what would happen if I switched to a high flow air filter. I bought it for MT-25.
The Bellows portion of the OEM filter is 24, and the Bellows portion of the high flow is 12, which simply means that the filter area is reduced by half. Also, since the OEM filter does not have the mesh part of the Gold genus, the resistance is considerably reduced! I think.
However, since the intake part of the Large original has not been made Large-like, I wonder if there is not such a Large-like change.
The Torque feel is increased from half throttle to full throttle, although this may be due to the Brush-boost effect.
I think that ECU map change etc. would have a better effect!
View detail
Maybe it lives up to its reputation.
I decided to try it out and exchanged my purchase because I had many opportunities to recommend it from people around me.
The double structure is obviously coarser than the NORMAL half-life filter used during the break-in period, and I think there may be some improvement in air intake efficiency, but immediately after installation? However, I had a feeling that there would be no change immediately after installation.
I drove about 50 km immediately after installation, and after a 30-minute break, I made a return trip back on the same road.
I was able to drive with a little restraint because of the road surface after the rain, but especially on the return trip home, I felt a little more power at the beginning of the opening part of the road.
This may be the effect of the Brushbow, but it was on a fresh dry road surface, so I tried to turn the Axel on more carefully than usual and then opened the Axel to full throttle.
There was also a range of revolutions in which we felt a mild sensation, and we also felt that if we went by the Torque curve, there was a sense that the valleys were filled in.
I also wonder if there was an ECU study on the return trip home, but I am not a specialist in this area? I'm not a specialist in this area...
By the way, the replaced Normal filter was relatively clean, and from this result, I will try to use it for a while, and I think it is certainly not a bad Select from the price.
By the way, is Kawasaki's maintenance consideration so important that the Z125PRO's normal filter box is opened and closed with a wooden screw? I am not so sure about Kawasaki's maintenance consideration.
Incidentally, it is said that if you apply a small amount of grease to the tip of the screw when installing the screw, turn the wooden screw by hand, align the screw at the position where it turns most lightly, and then tighten it lightly.
The Horn Bracket can be removed by removing the frame mounting bolt in the center portion of the image, which is the same as the normal procedure, but only one bolt is required, and the entire surface of the box is exposed, allowing the user to concentrate only on handling the wooden screws.
It is recommended as it is easier to work with.
View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Vino (2-stroke), YAMAHA BWS100 (Bewith), YAMAHA Axis 90, YAMAHA Apprio, YAMAHA Grand Axis, YAMAHA Jog 90, YAMAHA Super Jog Z, YAMAHA Yokota engine 100cc model before regulation, YAMAHA Yokota engine 50cc pre-regulation model, YAMAHA Horizontal engine, 90cc, pre-regulation model, YAMAHA BWS100 (Bewith), YAMAHA Axis 90, YAMAHA Apprio, YAMAHA Grand Axis, YAMAHA Jog 90, YAMAHA Super Jog Z, YAMAHA Yokota engine 100cc model before regulation, YAMAHA Yokota engine 50cc pre-regulation model
It's safe.
The price is good, the build quality is good, and it seems to be large and sturdy even if it is bore up. View detail
Purchased with Engine Displacement VolumeUp from 69cc to 103cc
KN BIG-BOX for Engine Displacement VolumeUp from JOG 69cc to 103cc (For Big carburetor) The Exhaust System is KN G03R.:After increasing the engine displacement volume to 103cc, I added 1 pc and am now setting the fuel mixture while watching the fuel mixture with an air/fuel ratio meter. I am sure that the power is increased by adding the engine displacement volume, but the intake sound is extremely loud, which is a little disappointing. View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX 300, YAMAHA XMAX300, YAMAHA XMAX300
It is okay
When I recently went to a motorcycle shop to replace my belt, I was told that I should also replace the air filter. I got a quote for OEM and labor, but this product was reasonably priced, so I replaced it myself. The replacement was easy and I am glad I did it. View detail
Fits: HONDA LEAD 90, HONDA DIO SR, HONDA DJ1, HONDA DJ1 R, HONDA DJ1 RR, HONDA DJ1 L, HONDA Lead 50, HONDA Dio., HONDA Superdio, HONDA Superdio SR, HONDA Superdio ZX, HONDA Superdio XR, HONDA livudio, HONDA LIVEDIO ST, HONDA Liveo SR, HONDA Livdio ZX, HONDA Johno., HONDA baton, HONDA Scooter 100cc series, HONDA Scooter 50cc series
NK Planning Auto choke
The OEM Parts Auto choke was already discontinued, so we were glad to have compatible parts. Installation was easy and I am very satisfied with the product. View detail
5 if there are different types of angles
The product was exactly as I expected
I used it on my NIBBIPE 26 and would be happy if I could choose the angle.
View detail
Why are they wrapped in oil?
Is it more expensive because it is oil-resistant Sponge?
I didn't think it was already packaged with oil on it. I wonder if it's sturdy enough to be attached as is?
In the meantime, I re-dipped the oil for the air filter.
I applied the original FilterSponge and cut it into a slightly larger outline.
View detail
Inexpensive, although durability is questionable.
I bought this to install on my TM-MJN24.
It is possible to use it if the hole is expanded a little by Drill because the position is not slightly matched.
This is the second one I've bought, and it cracks right away. I've used it as is, but the crack hasn't reached the inside, so I'm thinking it's something like that. I'm not sure if it's the same thing, but I'm not sure if it's the same thing if it breaks in one week.
View detail
Scooter's Filter is not washable.
This type of Element cannot be washed and reused due to its structure.
I don't mind because it's cheap at all.
[How is it used?
I'm using it on my PCX125, it's a 2012 model with about 18,000km on the odometer. It's not that it's in bad shape, but I decided to replace all the consumable parts once, so I replaced the other parts along with the drive train. I did it for the first time and it was very easy.
How was your experience with it?
Carburetor Vehicles can make a difference, but I didn't feel that much of a difference, perhaps because it was an injection vehicle.
Well, I guess it's the peace of mind that comes from knowing that the car is being properly maintained.
How did it compare to other products?
The difference is obvious when compared to other products, but not the old ones.
You're disgusting.
[Points to note]
I know this is Element in general, but it's a pain to throw away the old Element that you replaced, because the Gold genus part is completely integrated and it looks like you can't disassemble it without destroying it.
While you're at it, clean the inside of the Air cleanerBox as well.
My PCX was full of soot in Blowby?
View detail
Universal Air Element Sponge
It is convenient because it can Cut freely. View detail
Fits: その他 , YAMAHA GRAND AXIS, YAMAHA BWS100(BWS)
Air cleanerBig box for gAXIS
I wanted to make my Second Type ModelgAXIS a little faster on the street, so I changed the Piston and Cylinder to a Big GREED, Big manifold, pe28carburetor, Big air chest box and Chamber. Thanks to this Big air chest box, the volume and the balance of the setting are much better and more stable. because it is an OEM box, it runs well even on a rainy day.
I thought it was a good product.
View detail
Fits: HONDA Lead 50AF48, HONDA Lead 100JF06, HONDA Lead 50AF48, HONDA Lead 100JF06
If anything, it's subtle!
Sugar Crystal's Turbo Type and Manufacturer introduction is a combination of fine and coarse.
Until now, we have been using HondaOEM Product in dry form.
I used it this time because I felt the resistance of Filter at full throttle.
By the way, Bore up (123cc), PWK28carburetor, Normal muffler (without Catalyzer)
In the spec. of "Air Cleaner BOX", two holes of about Φ35 are drilled.
(Φ35, we're in a situation where we're running out of air in one place)
Installed it dry, ran it without changing the Jet, but it felt a little thin.
I went up 5 Main jet (#120→#125), but on the other hand, it looks a little darker.
#2 or #3 UP seems to be good.
This is a result of the above EngineSpec., so it may not be necessary in a completely NORMAL state.
Gold is twice as expensive as OEM …
If you are using STD Engine Displacement, port, chamber and other specs, and you are running 10,000 rpm in normal cab.
I'm sure you can feel the change.
I've been using OEMs dry without soaking Oil and have been able to handle it to some extent.
If you use dry type, you need to maintain the filter frequently.
I'd like to try Main jet #2 and #3 UP (it's just a feeling …), and
If you want to stick to Other Brand Product, you may use it.
The quality of the product is good, it is comparable to OEM and fits perfectly.
But I don't know how durable it is…
I pray it won't be the case that Sponge was ripped to shreds and sucked in… when I found out! (LOL)
View detail
Compatible with older cars
I used it for SEA BASSEPOAir filter.
Anyway, my car, EPO, has almost no accessory parts like Gorimon, and the manufacturer is missing some parts, so it's Large strange.
There is one thing to keep in mind when using Scissors, Cutters, etc., because if you don't use them at right angles to the Sponge, they won't fit in the cleaner box properly.
Notes.
The thickness of the cleaner was also good, I just installed it so I don't know how durable it is but I'll see how it is for a couple of months.
View detail