Reviews
I thought it was from the KN project …
I wanted to get a Mesh filter from Taiwan MOS.
Not in Webig.
Buy this one.
But when I received it and looked at it, it was a Filter made by MOS?
It looks like it's being sold as a KN project.
I wish the images in the product listing had been posted by Package.
View detail
Fits: その他 , YAMAHA GRAND AXIS, YAMAHA BWS100(BWS)
Air cleanerBig box for gAXIS
I wanted to make my Second Type ModelgAXIS a little faster on the street, so I changed the Piston and Cylinder to a Big GREED, Big manifold, pe28carburetor, Big air chest box and Chamber. Thanks to this Big air chest box, the volume and the balance of the setting are much better and more stable. because it is an OEM box, it runs well even on a rainy day.
I thought it was a good product.
View detail
Fits: SUZUKI address V125, SUZUKI address V125
Cheap and well made.
Cheaper than OEM Product and easy to see the dirt.
It's cheap and you can replace it without worrying about it.
View detail
This gasket is perfectly fit to the throttle cover of Keihin pwk. View detail
Fits: HONDA Lead 50AF48, HONDA Lead 100JF06, HONDA Lead 50AF48, HONDA Lead 100JF06
If anything, it's subtle!
Sugar Crystal's Turbo Type and Manufacturer introduction is a combination of fine and coarse.
Until now, we have been using HondaOEM Product in dry form.
I used it this time because I felt the resistance of Filter at full throttle.
By the way, Bore up (123cc), PWK28carburetor, Normal muffler (without Catalyzer)
In the spec. of "Air Cleaner BOX", two holes of about Φ35 are drilled.
(Φ35, we're in a situation where we're running out of air in one place)
Installed it dry, ran it without changing the Jet, but it felt a little thin.
I went up 5 Main jet (#120→#125), but on the other hand, it looks a little darker.
#2 or #3 UP seems to be good.
This is a result of the above EngineSpec., so it may not be necessary in a completely NORMAL state.
Gold is twice as expensive as OEM …
If you are using STD Engine Displacement, port, chamber and other specs, and you are running 10,000 rpm in normal cab.
I'm sure you can feel the change.
I've been using OEMs dry without soaking Oil and have been able to handle it to some extent.
If you use dry type, you need to maintain the filter frequently.
I'd like to try Main jet #2 and #3 UP (it's just a feeling …), and
If you want to stick to Other Brand Product, you may use it.
The quality of the product is good, it is comparable to OEM and fits perfectly.
But I don't know how durable it is…
I pray it won't be the case that Sponge was ripped to shreds and sucked in… when I found out! (LOL)
View detail
Increased inhalation effect
Cub Pro110 (JA07) I bought it for the purpose of inhalation effect UP of My CUB is BigThrottle&NORMALAir cleaner (Turbo filtering) However, the intake power is low, so I installed a Duct.
[Effects you can feel]
? It became sticky in the middle and low speed while driving.
(If it is a certain hill, it sticks and accelerates even in 4th gear.)
[What's on your mind]
? The product BALI is awesome!
You have to punch a hole in the air cleaner.
If the above does not bother you, you can expect the effect.
View detail
No Color.
The texture was good to look at, and the fitting was fine. I am satisfied with this quality at a reasonable price. View detail
Compatible with older cars
I used it for SEA BASSEPOAir filter.
Anyway, my car, EPO, has almost no accessory parts like Gorimon, and the manufacturer is missing some parts, so it's Large strange.
There is one thing to keep in mind when using Scissors, Cutters, etc., because if you don't use them at right angles to the Sponge, they won't fit in the cleaner box properly.
Notes.
The thickness of the cleaner was also good, I just installed it so I don't know how durable it is but I'll see how it is for a couple of months.
View detail
Fits: HONDA PCX125, HONDA SHMODE, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA AIR LADE125, HONDA Click125I
Cosmo!
I installed it on my PCX125 (JF56) for commuting.
I used to use the OEM Product (see photo below), but this product is less than half the price of the OEM, so I chose this one this time.
I have installed it and have driven over 10,000km and I don't feel any difference from the OEM Product. 。 There is no change in power performance, starting performance, or fuel economy, so it can be judged that the performance is equivalent to OEM.
The air cleaner element is a consumable item, so there is no reason not to buy this product at half the price if the performance is the same etc.
I will continue to use this one in the future.
View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX 300, YAMAHA XMAX300, YAMAHA XMAX300
If they're going to claim OEM compatibility, they should make it so it fits properly.
I bought this one because it's a high flow type, but unlike the OEM, it doesn't fit properly. It was supposed to be a 5 minute job, but it took quite a while. If you want to be OEM compatible, you need to calculate the dimensions properly. View detail
Cospar good
[How is it used?
for Replacement
Was the one you received as per Image?
Street Image
Was the installation difficult?
I don't know because I haven't replaced it yet.
How was your experience with it?
I don't know because I haven't replaced it yet.
[Included Parts:were they on?
Filter only.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA BENLY50AA03, HONDA BENLY110JA09, HONDA LEAD110
Performance is fine
OEM Parts have become quite expensive and are no longer easily available.
If you are not concerned about the quality of OEM Parts, but want the same etc. performance at a lower price, this is the one for you. There is no deviation in the dimensions and the performance is good. I plan to buy more for spare parts in the future.
View detail
Fits: HONDA Superdio, HONDA Superdio, HONDA Superdio, HONDA Superdio
Cheap and good quality.
I think it's cheap and the fit feeling is the same as OEM and Large. View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Apprio, YAMAHA Apprio, YAMAHA Jog (2 cycle), YAMAHA Jog 90, YAMAHA Vino (2-stroke), YAMAHA vino, YAMAHA vino
Fully OEM compatible and about half the price
Fully OEM compatible Air Filter.
I used it on my 94 APRIO (4JP1) and it fit perfectly.
There is no need to drill the holes or make the size slightly different.
The OEMAir cleaner disappeared by hydrolysis at the stage when I got the car body (only the edge was torn up and remained, and there was no center part, so it seems to have been sucked into the engine), and I cannot compare it with the OEM Product. I cannot compare it with OEM Product, but I feel that the eye is coarser than OEM.
I think OEM Product has two layers, coarse Sponge and fine Sponge, but this product has only relatively coarse Sponge.
Maybe I'm misremembering.
However, there is no shortage of performance, and it seems that the intake resistance is reduced, and it does not lose its tune, and the intake sound does not become noisy.
I can feel it. This is because I didn't just replace the engine, but also adjusted the Engine O/H, Carburetor cleaning, Air Screw and ThrottleStop position at the same time.
For OEMs, the price is 726 yen as of March 2021, but KN-made products are 375 yen, about half the price when Point is taken into account.
For what it's worth, I don't think this product is going to make anything worse, so it's probably an ant.
View detail
hard to use
I was going to use it with PE24, but there is no hold mechanism when I pull the Choke Cable, so I need to start and warm up the engine while pulling the Choke Knob. To be frank, I can't use it! View detail
![Reinforced Winner Throttle Spring [OKO And PWK28]](https://img.webike-cdn.net/catalogue/14190/10220911_4cc0d6ca0440a_TS.jpg)
KEIHIN OEM is weak.
I'm using it on my NSR80Racer PWKcarburetor.
I replaced the Throttle because of the weak pull of the Throttle.
It's a good feeling.
View detail
Fits: HONDA Livudio SR, HONDA Livdio ZX, HONDA livudio
Exchange from OEM
This is a replacement from the OEM
Since the OEM type is not a white surface, I replaced it with the Sports Type.
It is Large size Exactly, so I could replace it with Smooth.
After installation, I only adjusted the Air Jet. It was OK, almost the same as OEM.
I think the blowing is lighter now that it is new.
View detail
Fits: その他 Keihin genuine, その他 Keihin genuine, KAWASAKI D tracker, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI KLX250, KAWASAKI ZRX1100, KAWASAKI ZRX1100-II, KAWASAKI ZRX1200, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI Estrella., KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI D tracker, KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI KLX250
Good product
All in all, a very good product! 。 But my personal impressions are 'Ah! This is how it came to be!' It's as bad as it sounds. 。 (Emphasis & rarr;) Personally!
The vacuum valve, diaphragm and slide valve are all in one piece, but the slide valve is made of resin and is very light. 。 Probably because of its lightness, but it doesn't feel good in operation. 。 It's dull, it's sloppy, it's... ・ Especially the return.
It went from feeling like SpanSpan to feeling like a schooner....
Well, I'm getting used to it.
View detail
It's a perfect match.
Are you an OEM Product OEM? It was Exactly without missing a beat.
Durability is an unknown quantity as I just replaced it, but it makes me feel fine.
I replaced it at about 10,000 km away, but I don't know if it's because I also replaced the Plug & Oil at the same time.
I feel like I'm back in a good mood.
If I can buy a good product for such a very cheap price, I'll buy two more to spare.
View detail
ดีมากเลยครับเพราะหาซื้อไม่ได้ ขอบคุณที่มี Webike View detail