Reviews
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
steering wheel
This product has a lower weight than the stock steering wheel, which allows for greater motorcycle performance. The park received it in excellent condition, although the packaging was torn as if the piece had been unpacked before, although the product was in excellent condition. View detail
Fits: YAMAHA Dio bore up vehicle, YAMAHA Gyro Bore Up Vehicle
Used for repairs.
Clip went out and Cylinder scratched, and since it was so hard to find, Bore up.
The NORMAL Head hits, so replace it with this one.
It works fine
Full acceleration has not been done, so future endurance is unknown.
So far I am satisfied.
I guess I'm not happy with the changing length of Plug.
View detail
Fits: SUZUKI GSX-R150, SUZUKI GSX-S150, SUZUKI GSX-R125, SUZUKI GSX-S125
Bore up GSX-R150 is the best.
The bore up was done immediately, but the ECU and Quantity:The O2 Sensor of the set is 18mm type, so the boss for 18mm had to be welded to the exhaust pipe. 。 Break-in. Two hours of revving up and then driving at Tomin MotorLand.
At the beginning of the run, the gas was thin and there was no Torque feeling. 。
Final was NORMAL because it was a test run, but it was still the same speed as 250 Class MotorcycleCBR in the end.
Straight end to the point of exiting. 。 We all took turns riding it and said, "This is great.
The people on board were all about 60 kg, all old international A-class. I don't know about durability yet, but it is a good product,
Everyone else, please give it a try and see! 。 It would be better if the O2 Sensor was STD Size! Large size to install
View detail
Fits: HONDA Giorno, HONDA jorio, HONDA G DASH, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA SUPER TACT
It didn't fit the GYROX mid-term.
It did not fit GYROX (TD01-17~).
The diameter of the thickest part is too thick and pops out even though it is shaved down a little to put it in.
I made my own Bracket and attached it with Rubber packing to hold it down.
View detail
Fits: YAMAHA Grand Axis, YAMAHA Cygnus X, YAMAHA champ, YAMAHA champ, YAMAHA champ, YAMAHA NMAX155, YAMAHA GRAND MAJESTY400, YAMAHA CYGNUS X, YAMAHA CYGNUSZ, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle), YAMAHA JOG APRIO, YAMAHA JOG APRIO, YAMAHA VINO(2Cycle), YAMAHA MAXAM, YAMAHA MAJESTY125, YAMAHA MAJESTY125, YAMAHA MAJESTY250(4HC), YAMAHA MAJESTYS, YAMAHA MAJESTYS
Selected Gold as an insert color
The OEM filler cap from Mission oil was a milk-white color and looked too much like a dowdy cap, so I replaced it with this one! View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NS50F, HONDA NS-1, HONDA MBX50, HONDA CRM50
We are now going to Overhaul.
We are going to start the Overhaul. Seals are also included in the quantity:Set would have been great. View detail
Pricey OEMParts
I bought this product because it was the company's Bore Up Kit and there was an entry in the description that said it should be replaced.
When I received the package, I found that it was just YamahaOEMParts in the KN project Package.
The things are OEMParts, no doubt, but it is cheaper to buy OEM as-is, and since OEMParts are available at Webike, we do not recommend buying this one.
View detail
Fits: HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO(4Cycle), HONDA TODAY, HONDA Giorno (4Cycle)
Very nice
Quality product, came in 5 days, fast and detailed communication by email, gonna buy other products in future too, really satisfied thanks View detail
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S
1/3 the price of OEM Sufficient for your needs
for ADDRESS V125
KN project has almost all kinds of materials, and when I did Throttle body~EngineRose, etc., O-ring was also included, and it was cheap and quite helpful. all KN Materials are made of paper, and OEM hard PlasticRubber. (Oil rotation) The durability is OEM compared to the Overspecifications, but honestly, the Overspecifications (Too perfect) I feel that the KN stuff is sufficient for fast driving. (For those who use the engine head/Cylinder gasket very hard, the OEM one is better. (Even those who are doing Head surface grinding/Bore up, etc.) 。
For basic maintenance [Contents] If you want to have all of the above, the Gasket Set by KN Planning, which is less than 1/3 of the price, is sufficient.
View detail
Interesting port shape, though installation is still to be done.
The shape of the exhaust port on the Cylinder side is a mountainous shape, which is very unexpected. I am looking forward to see how the exhaust sound and characteristics will be. I am looking forward to it. I am looking forward to it. View detail
Fits: YAMAHA Axis 50, YAMAHA Jog Aprio Type 2, YAMAHA JOG EX 7PS, YAMAHA JOG EX 7PS, YAMAHA JOG Z, YAMAHA Super Jog ZR, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA JOG EX APRIO (All models), YAMAHA jogpochet, YAMAHA Jog-A-Prio, YAMAHA Jog-A-Prio, YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Vino (2-stroke), YAMAHA Remote control jog
It is a great Kit for the high price. I can recommend it.
The finish is very beautiful as it is very expensive, and even though I assembled it without BALI and rode it without careful breaking in, it didn't seize up.
The clearance of Cylinder and Piston is no problem at all, but it might be better for your mental health to at least brush the corners of the Piston with Paper. The supplied clips are easily deformed and are very difficult to assemble.
Oil is separated by 3kjPump before regulation. The oil is still in the same condition as it was before the regulation.
View detail
GYRO's Bore up
I bought this for a GYRO Bore up. The bolt holes are a little off. The bolt holes are a little off, but I think it would be better to cut them a little. View detail
To Restore.
I used it on a MAJESTY 125 Restore that I purchased used.
The oil leak from the cylinder head, which is a pre-existing condition of this vehicle, was so severe that we decided to replace it because it was in a very scary condition to drive.
The work went smoothly and the leak was stopped without incident.
I have no problems with the quality and I would repeat it again because it is inexpensive.
View detail
Fits: YAMAHA VINO(2Cycle), YAMAHA SUPER JOGZ, YAMAHA SUPER JOGZ, YAMAHA SUPER JOG ZR, YAMAHA JOG POCHE, YAMAHA JOG APRIO Type 2, YAMAHA JOG (2Cycle), YAMAHA APRIO, YAMAHA APRIO
scratch
Carbon paint peeling
without Logo
Are you inspecting?
View detail
Fits: HONDA Super DIO, HONDA Super DIO SR, HONDA Super DIOZX, HONDA Super DIO, HONDA XR Baja, HONDA DIO, HONDA DIO SP, HONDA DIO SR, HONDA G-dash, HONDA DJ1-RR, HONDA standup tact, HONDA Tact S, HONDA Johno., HONDA Lead 50, HONDA Joker 50, HONDA Broad 50, HONDA Cabina 50
Is the cast metal workmanship in line with the price?
Although it claims to be for introductory use, it does not come with an Instruction Manualetc.
The object seems to be a Cylinder dug for 49.9cc.
There was also a BALI removal in Cylinder.
The cooling fins? The cooling fin has a crack, or perhaps it did not flow into the mold properly, so I think it is a reasonable product.
On the intake side, etc., where no cutting was done, a powder-like substance fell out when the casting surface was textured and rubbed. Casting sand residue?
Recommendation is to clean it up once and then use it.
View detail
Fits: YAMAHA MR50, YAMAHA GT50 Mini Training, YAMAHA DT50 (air-cooled), YAMAHA MR50, YAMAHA GT50 Mini Training, YAMAHA DT50 (air-cooled)
To Power up
The Engine Displacement VolumeUp definitely increased power, and I liked that it looked the same as NORMAL! View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
It's neither good nor bad
I bought it because the OEM had been a Screw Mountain fool since I bought it. Well, it's expensive. View detail
Fits: SUZUKI TS50X, SUZUKI TS50XK, SUZUKI TS50XKG, SUZUKI TS50XKJ, SUZUKI TS50XKM, SUZUKI TS50X, SUZUKI TS50XK, SUZUKI TS50XKG, SUZUKI TS50XKJ, SUZUKI TS50XKM
Restore.
It will take a year to complete the Restore, but I think it will be good. View detail
Fits: SUZUKI SEPIA ZZ, SUZUKI SEPIA ZZ, SUZUKI STREET MAGIC, SUZUKI HIUP, SUZUKI HIUPR, SUZUKI ZZ, SUZUKI Address, SUZUKI AddressEX, SUZUKI AddressV, SUZUKI Address Tune, SUZUKI STREET MAGIC S, SUZUKI STREET MAGIC SD, SUZUKI SEPIA, SUZUKI SEPIA RS, SUZUKI LETS, SUZUKI LETSS, SUZUKI VERDE
also
It is possible to use a normal head, but you may have to adjust it by inserting a few Gaskets of similar thickness. View detail