Reviews
Required for Crank Case Cover
Hose holder is attached to Crankcase and is required when replacing KOSOCrank Case Cover. The other attachments are all gold and the same color, so 5 stars. View detail
There should be a cooling effect for sure w
[How is it used?
The radiator size of 390DUKE is small in relation to the engine displacement volume, and the cooling fan starts running immediately when driving slowly even in winter, so I was wondering if there was anything I could do. One day, when I was wandering around WeBigSite, I happened to find a product that I thought I could use!
Was the one you received as per Image?
It looks like it was cut-out from solid Aluminum. The texture is very nice.
Was the installation difficult?
It was too much trouble to install it myself, so I threw it to KTMDealer!
We had already measured the size of the radiator hose and had a good idea of where it could be installed, so we requested the work to be done on the actual product. As expected, a part of the fin (heat sink) of the cooling tube came in contact with the engine case, so we asked them to cut the fin and make a clearance. Fortunately, the inner diameter of the radiator hose and the outer diameter of the Cooling Tube's insertion point were exactly the same. To be safe, I ordered a new radiator hose, cut it and used it.
How was your experience with it?
It has a great cooling effect on my mood!
In fact, to be honest, it may seem that the Timing of the cooling fan starting to turn is somehow slower than before?
I have driven about 300km since installation and have had no problems so far.
[Included Parts:were they on?
Nothing is attached.
[Was there anything that disappointed you?
The product itself is good, but I still need to use an accurate water temperature gauge to determine its effectiveness. There is no particular demerit from the installation of this product, so I will continue to use it as is.
Other items that would be helpful
Point or hang for installation:A part of the fin of the Cooling Tube touches the Engine Case, so a tool (such as Belt Thunder) that can cut a curved line is necessary.
Note:It is better to prepare a new Radiator hose before starting work. Using old hose as it is may cause coolant leakage.
Availability and comprehensibility of Instruction Manual:There is no Instruction Manual because this is a Universal Product that requires ingenuity and ingenuity.
Items to purchase with the Coolant:I will need a Coolant for re-filling since I will be working with the Coolant removed. You will also need 2 additional hose bands.
Opinions and requests to Manufacturer:I know it is difficult because I don't think it is a product that sells well, but I would appreciate multiple Size developments.
View detail
Used to divert intake manifolds
To install an AF34 carburetor on an AF24TACT, it is necessary to use an AF27 or similar intake manifold. However, AF27 intake manifold does not have a nipple to get negative pressure, so I bought this product. I drilled a hole, cut a tap, and wrapped seal tape around it to make sure it would fit. I was able to get the negative pressure. View detail
Thank goodness for Gold alumite addicts!
KOSO's Fashion Hose is held firmly in place and the bolt is changed to Titaniumium color. The angle and the amount of protrusion can be changed so that you can install according to your taste! View detail
Product as expected
Built just as I imagined.
I like the feeling of playing around with it a bit.
View detail
I've been looking for you
Has this product been available before….
I wanted something like this. I'm satisfied. Thank you very much.
View detail
Fits: HONDA ZOOMER(Ruckus), YAMAHA 4ST VINOSA26J, YAMAHA 4ST JOG(SA36-39J)ZR, YAMAHA 4ST JOG(CE50)ZR, YAMAHA 4ST JOG(SA36-39J), YAMAHA 4ST JOG(CE50), YAMAHA VOX, YAMAHA BWS50YW50F, YAMAHA BWS504ST, YAMAHA RZ50, YAMAHA TZR50, YAMAHA NMAX125, YAMAHA TMAX530, YAMAHA TMAX500, YAMAHA MAJESTYS, YAMAHA MAJESTY125, YAMAHA GEAR(FI), YAMAHA GEAR(4ST), YAMAHA 4ST VINOSA37J, HONDA CREA SCOOPY
Parenthesis good!
Change the Radiator water and bleed the air out
It was too much trouble to check the amount of water, so I made the cap visible by cutting the cover However, I wanted to parenthesis well a little more, I put on Mr. KN's Cap and dress- up
the footpegs are the same color by the same manufacturer, so it's a unified look!
View detail
Fits: HONDA ZOOMER(Ruckus), YAMAHA 4ST VINOSA26J, YAMAHA 4ST JOG(SA36-39J)ZR, YAMAHA 4ST JOG(CE50)ZR, YAMAHA 4ST JOG(SA36-39J), YAMAHA 4ST JOG(CE50), YAMAHA VOX, YAMAHA BWS50YW50F, YAMAHA BWS504ST, YAMAHA RZ50, YAMAHA TZR50, YAMAHA NMAX125, YAMAHA TMAX530, YAMAHA TMAX500, YAMAHA MAJESTYS, YAMAHA MAJESTY125, YAMAHA GEAR(FI), YAMAHA GEAR(4ST), YAMAHA 4ST VINOSA37J, HONDA CREA SCOOPY
Inconspicuous decoration
It's a bit of a distraction, but it's a nice touch
I was able to install it on an '18 KF30
It's just a mystery to me how it can be fitted with that construction without rattling! (Lol)
Put it on and turn it to Right to fix it, so far it hasn't come off or come loose
View detail
Hose holder bws 125
The Kn Planning Hose holder for bws 125, This holder is very nice design and highly recommended for all zuma or cygnus 125 hose holder bracket View detail
very good
Used for taking out negative pressure from Carburetor. Screw diameter, Pitch, mounting outer diameter (Hose diameter) Though data such as Data are described is unexpectedly few, in that respect this product was clearly stated clearly so you could purchase with confidence. Blind plug (Rubber cap) I was thankful if it came with.
View detail
Perfect fit and finish
I took off the plastic cvt cover for better air flow. This solves looks great, is inexpensive, and is very functional. The craftsmanship is very clean, so spicy. View detail
It is cheap but has difficulty in durability?
We are using it for water cooling of GRAND AXIS.
When purchasing MechanicalPump use attached Seal for about 3 years. Although it was used as a spill by water leakage or fitting, when Seal was also exchanged when changing the bearing Bearing, water leakage occurred exactly one year. Water leaks even after the water temperature exceeds 100 ° C or even after warming at subzero temperature.
However, there are times when it does not leak, so it is probably a part to be replaced regularly.
It's easy to install, but it is Parts I do not want to exchange frequently as much work that comes with such as Parts to be removed and bleeding of cooling water etc..
Also, since it will be scrapped when it becomes out of stock, please supply parts for a long time.
View detail
Fits: YAMAHA SMAX, YAMAHA Majesty S
Cheap Custom ♪
I tried to buy it by watching other people's impressions on the web.
Impre street, easy to install.
Because the price is also cheap, it is recommended to give a sense of custom easily.
View detail
Fits: YAMAHA SMAX, YAMAHA Majesty S
This will protect Radiator fins.
Radiator, I'm at that position, but Small stones are hitting unexpectedly. In 2 weeks after delivering, I found Small stones between Resin Cover and Radiator Body and purchased immediately, so there is no Damage in Radiator's Core up to now. Now it is scarred on the Guard surface so it pretty much prevents it, it is a good item for mental health w. Installation is pretty easy. Just remove the resin Cover, just on the Radiator side there is a place to add to the round indentation of the product corners so fix the four corners there and just return the resin Cover. How to attach Helmet's PIN lock Shield. There is no influence on cooling at all either.. View detail
Fits: YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith)
Dress-up effect preeminent!
Although it is a place not conscious much, when Fan cover is colorful and made of Skeleton, it becomes a powerful appearance because not only the color but also inside can be seen through.
Material is easy to break, so it is safe to do installation carefully.
Because my engine is crispy, the vibration is also strong, and Items of this hand are fragile and are the third purchase.
It is cheap, but if the rigidity is a bit stronger - - -
View detail
Hold!
SUPER JOG Zr. I installed it in 3YK.
Until now, I had stopped at Shock bottom with Tie Wrap, but this KN project. I found out the existence of Hose Holder and installed it. For normal mounting orientation "Character of b" Although it looks like, I do not like Hose tip approaching Tire, "D character" It installed in the direction of. Hose is made by Mukawa and Hose end is SHIFT UP.
View detail
Marearei Engine for Repair
【What made you decide the purchase?】
A reasonably reasonable price and what can be used for Seal of Water pumpShaft of Minarei Engine which does not have OEM Parts Number in Japan.
【How was it actually used?】
There is no problem in particular.
【Was it difficult to install? (Hard parts case)】
Because this Seal itself is just a snap, it is easy to change Large.
When exchanging this, we will also exchange Bearing so it may be somewhat difficult.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Beware! The way the Spring looks is outside (Liquid side) is.
Let's put in a Bearing after assembling.
Applying WaterproofGrease to Shaft will last longer.
[Is there anything I was disappointed about?]
Being a Type not attached with Da Strip.
Also, a bit high. In Europe it is about 2 EURO.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Such parts are grateful, so we would like you to keep them in stock at all times.
Also, if possible we would like to have Seas of Das with Trip.
【Have you compared items?】
OEM Product, others, many EU repair products ...
Even for the same purpose, the Seal shape is unexpectedly different. But I can laugh about roughly JAPAN.
There was no difference in the durability in any way.
[Others]
In my Airlocks, water leaks will occur if you do not change it once a year.
Those who are riding Minarelli Engine, along with 608 Seal bearing, are the parts that we definitely want to keep.
View detail
I do not know where Hose Holder is
Buy with Brake hose's Clamp. Perhaps the price seems to be fixed price. After all, because the head of Hose's Fitting is bigger than the hole of Clamp, it can not be used, it is used for fixation of Blyzer Hose which seems to be the original use place.
Let's do a preliminary study and purchase.
View detail
Got this since I was looking to get rid of the black plastic CVT cover and needed this to hold the tube. Bolted right up on my Zuma 125 with the included bolt. This matches many of the other blue items on this site.
Got this since I was looking to get rid of the black plastic CVT cover and needed this to hold the tube. Bolted right up on my Zuma 125 with the included bolt. This matches many of the other blue items on this site. View detail
It purchases in order to measure the head temperature of a Scooter.Since it only inserts between the Plugs, installation is simply possible.after (deleting fin of Head depending on loading vehicles) installation has measured temperature sat
It purchases in order to measure the head temperature of a Scooter.Since it only inserts between the Plugs, installation is simply possible.after
(deleting fin of Head depending on loading vehicles)
installation has measured temperature satisfactorily -- it comes out and is functionally satisfactory.The effect that
temperature can be measured was greatest and changed into the state where a Temp meter cannot be parted with.
This product does not merely have a quite satisfactory raw material.More than the raw material of the
Aluminum considered, it will bend immediately softly.Since it has
Bent when having tried the Fitting on
vehicles attachment, uneasiness remains in durability.After is as how [ that it is the same price as the Temp-meter main part of KOSO ]...
View detail