Reviews
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
The best clutch
very cool quality ordered on March 29, arrived on April 8, installed them immediately, happy with the result, I will order more View detail
Fits: SUZUKI High UP R, SUZUKI high up, SUZUKI SEPIA ZZ, SUZUKI Address Tune, SUZUKI SEPIA, SUZUKI AddressWAY, SUZUKI ADDRESS V50Tune, SUZUKI ADDRESS V50, SUZUKI ADDRESS V100, SUZUKI Address EX, SUZUKI Address
Best clutch
The order arrived, the quality of the clutch is excellent, I installed it on my bike, I’m happy with the result. I will recommend it to my friends View detail
Fits: HONDA CLIQ110, HONDA NAVI 110
Thankful product
I appreciate Large change because Aftermarket parts (especially consumables) for Motorcycle that are not FOR JAPAN MODELLineup can be purchased at about half the price of IndiaHondaOEM Product. View detail
Fits: YAMAHA , YAMAHA JOGPoche, YAMAHA JOG50, YAMAHA BJ, YAMAHA VINO, YAMAHA APRIO, YAMAHA APRIO, YAMAHA SUPER JOG ZR, YAMAHA SUPER JOG, YAMAHA JOG remote controlZr, YAMAHA JOG remote controlZII, YAMAHA JOG50, YAMAHA JOG remote controlZr, YAMAHA JOG remote controlZr
Clutch outer replacement
APRIO (4jp5) The clutch outer of the "M" was worn and slippery, so I bought it for a replacement.
I had changed only the clutch first, but it started to slip a little when starting off, so I decided it was time to change it.
Inside of Clutch outer (Clutch contact surface) However, the old one was smooth as if it had been mirror-finished, but the new one had the same rough pattern as the surface, so I thought Clutch had a good bite.
I haven't done a test run yet after the replacement, but I don't think it will be a problem since there are no problems with the original running.
Outer clutches are supposed to be replaced when the color of the clutch burns out, so from now on, the clutch and the quantity:I will change it with Set.
View detail
Fits: YAMAHA Aero X100, YAMAHA Grand Axis, YAMAHA RX100, YAMAHA BWS100 (Bewith), MBK NITRO100, YAMAHA Aero X100, YAMAHA Grand Axis, YAMAHA RX100, YAMAHA BWS100 (Bewith), MBK NITRO100
You can feel the change right away after replacement.
The belt needs to be broken in. Once the belt is broken in, you will definitely feel the change in your body. Since it is shorter than the original product, high-speed range can be expected. In addition, with the pulley side tune, both the early and middle ranges were satisfied! View detail
Fits: YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Axis 90, YAMAHA Jog (2 cycle), YAMAHA Super Jog Z, YAMAHA Super Jog Z, YAMAHA , YAMAHA JOG-EX, YAMAHA Axis 90, YAMAHA Jog Z, YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA Grand Axis, YAMAHA BWS100 (Bewith)
Improved performance with reliable lightweight!
It is definitely lighter than the original and has larger ventilation holes, so it is by far superior in heat management and improves response. I am satisfied with the packaging, finish, performance, and price of the product. Since it is a product from a company with a long history of data, I was able to use it with confidence. Thank you. View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
Necessary and sufficient.
I bought it for Setting.
4.5gSpec. and measured with a scale calibrated with weights, the error is sufficient to be at mostLarge0.03g.
The Body has the same shape of Both Sides, which does not seem to be oriented to the Body.
Durability is unknown, but I haven't seen any reviews that say it's bad, so I guess it's not a problem.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100
KN Project SEA BASS type Slide Piece
Purchased a new Slide Piece for replacement, the Ramp Plate itself was also replaced by KN Kikaku's one and it works fine.
Even if only one Slide Piece is missing, it will be impossible to build a drive system, so it is better to leave it in Stock.
Thank God they had it in stock.
View detail
Fits: HONDA CLIQ110, HONDA NAVI 110
buy for Replacement
I purchased this product for Replace for IndiaHondaOEM.
I have been using it for 5 years and I have a Risk that is about to run out, so it's a no-brainer.
Requires sukill for exchange.
View detail
Fits: YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA SMAX, YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA MAJESTY125, YAMAHA MAJESTYS
Durable.
I purchased this product as a replacement for the drivetrain of my Axis Treat for commuting. I have the same drivetrain in my car now, and it is running well without any problems even after running more than 20,000km since the last replacement, so I think it is a very durable weight roller.
However, there is one BALI location that you should take before you put it in.
View detail
![Reinforced Center Spring Middle Type [Medium]](https://img.webike-cdn.net/catalogue/images/31791/12151649_566fc6017084c_TS.jpg)
Fits: SUZUKI address V125, SUZUKI address V125, SUZUKI address V125, SUZUKI Address V125S, SUZUKI address V125, SUZUKI address V125, SUZUKI address V125
Excellent spring for increased torque
Fits: YAMAHA Champ 80, YAMAHA Jog 80, YAMAHA Champ 80, YAMAHA Jog 80
KN performance drive kit
About quality and texture Good quality About the feeling of use Feel strong Products to buy together Varial type of roller gram Difficulty of installation Service at scooter shop to install Cost performance and comparison with other products For more pickup and acceleration compare with original factory About shipping and packaging Good packagingikjuuufvvv Any concerns, cautions, or advice when purchasing I think this kit give more confident to use! View detail
Cospa best
After replacing the OEM at 20,000 km, we used this Belt for 17,500 km. ('Large body every 2500 km as we check the drivetrain)
I replaced the rubber on the SIDE because I found a broken spot with a "HUDDRILL", but I think it will last for 20,000km.
The new model is slightly thicker than the OEM model, so it is more acceleration oriented.
I am very happy with the quality of the product and the price.
The recommended Weights are 3 10g and 3 9g, the same as LETS4 and Address50φ17×12mm can be used.
View detail
Fits: YAMAHA BWS R2JS Taiwan, YAMAHA BWS 125 Type 2 BG1FOR JAPAN MODEL, YAMAHA CYGNUS X 5-inch B2J Taiwan, YAMAHA CYGNUS X 4-inch 2UB Taiwan, YAMAHA CYGNUS X 4 type BF9FOR JAPAN MODEL, YAMAHA BWS X46P, YAMAHA BWS 1255S9, YAMAHA CYGNUS X 3 Type 1MS Taiwan, YAMAHA CYGNUS X 3 Type 1YPFOR JAPAN MODEL, YAMAHA CYGNUS X 2 Model 4C6 Taiwan, YAMAHA CYGNUS X 2 Type 1CJ Taiwan, YAMAHA CYGNUS X 2 Type 28SFOR JAPAN MODEL, YAMAHA CYGNUS X Type 1 5TY Taiwan, YAMAHA CYGNUS X Type 1 5UAFOR JAPAN MODEL
Buy it because it fits
NK Planning's products are a little more expensive.
I would be willing to pay a premium if the quality were a little better.
View detail
Fits: YAMAHA SMAX, YAMAHA SMAX, YAMAHA Majesty S, YAMAHA Majesty S
Good
After the replacement, I feel that it is better than the original one. Durability will be known only after riding it, but I am satisfied with it for now. View detail
Fits: YAMAHA Majesty S, YAMAHA SMAX, YAMAHA FORCE 155
Good
After the replacement, I feel that it is better than the original one. Durability will be known only after riding it, but I am satisfied with it for now. View detail
Fits: SUZUKI ADDRESS110, SUZUKI STREET MAGIC 110
Rayniel Alberto Abreu
Excellent quality and the product arrived very quickly. I was delighted with you and well protected in its box. I would like you to have Suzuki Adrees 110 parts such as the cylinder rasing cam and dream them for more power ------------- --------------------------------------------- Excellent quality and I got the very fast product of you and well protected in your box I would like you to have parts of Suzuki Adrees 110 as a rash rash cylinder and your power for more power Powered by Google Translator View detail
Fits: SUZUKI Address V100, SUZUKI address V125
I haven't used it yet, so I can't be sure
Purchased cheaply for maintenance -------------------------------------------- -------------- Buy cheap for maintenance. Powered by Google Translator View detail
![Repair Oil Seal For Torque Camshaft 1DK-0036 [MAJESTY S / S-MAX]](https://img.webike-cdn.net/catalogue/14190/12071549_56652be0ab52f_TS.jpg)
Cheap
ClutchJudder with Grease leak from Seal
While greasing up the Torque Camshaft, tweak it a bit with Minus and fit it face first with a plank and Hammer.
Shoe correction with Parkli and Paper
I don't know of any Judder complete cure holders.
Quantity:1 Set of 2pcs. at 1/4 of OEM price is amazing and tearful
View detail
Used on an ADDRESS V100 (CE11). It became comfortable.
I installed them on an ADDRESS V100 (CE11) that I purchased from Zimoti. I bought it because BeltOthers had already replaced it with a new one at the time of purchase but with NCNR, but it doesn't go up at all on a hill.... Strange, right? The BeltOthers were so worn out and the Weight Roller was so worn out that one of the rollers was facing sideways. I knew this was no good, so I installed them as I had learned on Youtube, and they went up the hill without a hitch.
It is important to learn and install the software in advance via Youtube, etc. An Impact wrench would also be very helpful.
View detail