Reviews
Shim washer removal
[How is it used?
Mainly for city driving.
Was the one you received as per Image?
As per the Image, it was longer than the KITACO DLC Pulley boss, so we decided to go with ShimWasher less.
Was the installation difficult?
Weight Roller was changed to 8.5g→8.0g.
How was your experience with it?
It worked great with the Weight Roller. We lost the maximum speed, but gained sharp acceleration.
The high rpm range is used efficiently.
[Included Parts:were they on?
No Instruction Manualetc.Included Parts:in the Blister pack.
View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI HI UP
PON☆
High Speed Pulley while BeltRefresh
and other exchanges.
Weight Roller is made to OEM weight.
Pontoon & top speed went from 51 km/h to 74 km/h.
GPS measurements.
CA1CBAddress Tune.
View detail
Fits: HONDA GYRO system (TA01), HONDA GYRO system (TA02), HONDA GYRO series (TD01), HONDA jorio, HONDA Giorno, HONDA GIORNO CREA, HONDA ZOOMER, HONDA TACT, HONDA TACT, HONDA TACT, HONDA DIO General, HONDA TODAY, HONDA Byte, HONDA LEAD 50, HONDA LEAD 50, SYM DD 50
KN Planning Weight Roller6g
The Axel Response was better, but the RPMs were higher, making it harder to drive around apartment complexes in the early morning.
I would also change to a slightly heavier Roller.
View detail
Fits: KYMCO SOONER 50, SUZUKI Address V100, KYMCO SOONER 50
KN Planning Reinforced Drive belt
At first it felt like it was slipping when starting off, but after driving 100 km or so, it seemed to have a good response.
Cost performance is good and I would use it again.
View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Good product, but 2 weeks from order to arrival
The NORMAL Clutch has two pieces, but this item has three.
Be careful when you want to replace only the Clutch or Spring at a later date by reducing the ASSY.
Center spring is stronger.
So far, no problems.
However, I had to wait two weeks for delivery.
This is despite the fact that when I placed the order, the order page indicated that it would ship in 3 days.
Partner Warehouse. Into In stock." I'm just saying.
It is too late to be informed by email after the order has been accepted.
If I had been in a hurry, I would have definitely purchased elsewhere.
Even if they were waiting to be assembled, there is no way they would be so slow in communicating with FOR JAPAN MODEL.
The delay was probably due to waiting for deliveries from China, Taiwan, and other foreign countries.
View detail
Fits: HONDA GYRO system (TA01), HONDA GYRO system (TA02), HONDA GYRO series (TD01), HONDA jorio, HONDA Giorno, HONDA GIORNO CREA, HONDA ZOOMER, HONDA TACT, HONDA TACT, HONDA TACT, HONDA DIO General, HONDA TODAY, HONDA Byte, HONDA LEAD 50, HONDA LEAD 50, SYM DD 50
KN Planning Weight Roller6g
I have only installed it for a short time, but I felt that the start was not as good as the NORMAL.
Response is better compared to NORMAL while driving.
I gave it 3 stars because I don't know how durable the rest will be.
View detail
Fits: YAMAHA MAJESTY125, YAMAHA CYGNUSZ, YAMAHA BW'S R, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S125, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
I'll wait for someone to post the results to see if there are any bad effects.
I'm holding off on replacing it because I think it might have the same effect as lengthening the belt because the OD is smaller and reaches deeper into the Torque Camshaft groove, but it would increase the rattling in the groove, so I thought I could wait until I see what someone else has done before replacing it. View detail
It's a Repeat session.
The outer diameter for CHAMP is 1mm too large to fit, so this can be installed on Smooth. View detail
Fits: HONDA TODAY, HONDA TODAY, HONDA DIO 4 Str., HONDA DIO4st CESTA
6 months of use
Self-replacement, riding for 6 months, there was a speed increase of about 10km, but at some point, the initial torque did not rise and the vehicle did not move. I do not know, but I returned the parts to the original condition --------------------------------------- ------------------- Self -replacement, riding for six months, and a 10km speed up, but from one point, the early torque did not rise and the vehicle did not go. The vehicle was checked. I'm not sure, but I put it back with a pure part. Powered by Google Translator View detail
Fits: YAMAHA Jog (2 cycle), YAMAHA Vino (2-stroke), YAMAHA Jog Aprio Type 2, YAMAHA Apprio, YAMAHA Super Jog ZR, YAMAHA JOG50 Only for vehicles before exhaust gas regulation, YAMAHA Super Jog ZR, YAMAHA JOG50 Only for vehicles before exhaust gas regulation
Purchase Repeat
Another Review The Unexpected Cooling Effect." The overall thickness of the fan is noticeably thinner than the 3WF OEM fan. (However, since the feathers are offset to be Large on the generator side, the Large size of the feathers themselves does not make much difference.)
Again, I will try to quantitatively examine the difference in Head temperature with ThermistorSensor, but I feel that 3WFOEM without Offset is more advantageous since it is a fluid structure that inhales from the inside of the fan and exhales to the outside.
Incidentally, since the wings interfere with the PALSA Coil due to the offset, a small modification is required to slightly tame the PALSA corner with a file.
View detail
Fits: YAMAHA JOG90, YAMAHA Axis 90, YAMAHA JOG80, YAMAHA JOG-Sports, YAMAHA CHAMP80, YAMAHA Target RS90, YAMAHA Excel, YAMAHA Active, YAMAHA BOXN, YAMAHA JOG, YAMAHA CHAMP, YAMAHA CHAMP RS, YAMAHA SUPER JOG ZR, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO type2, YAMAHA APRIOEX, YAMAHA JOG, YAMAHA JOG-Sports, YAMAHA VINO
High turnover type, my favorite.
Even with the additional weight, the gearshift is still very high rpm. I like it because it is Exactly for my current engine characteristics. View detail
Fits: HONDA Giorno2, HONDA Byte, HONDA CREA SCOOPY, HONDA GIORNO CREA, HONDA SMART DIO-DX, HONDA SMART DIO
It didn't sacrifice low speeds as much as I thought it would.
GIORNO CREA has a weak center spring, and shifting starts almost as soon as the car starts, so the weight roller was set 1g lighter than the attached one, and the 0.3mm boss shim was used to make the Belt drop deeper to slightly raise the Engine RPM at low speeds. The weight roller is 1g lighter than the supplied weight roller, and a 0.3mm boss shim is used to increase the engine rpm at low speeds. By doing this, I think I can solve the problem of low speed leaning that is often seen with high speed pulleys. I think that the best setting is to set the center spring a little harder and make the weight heavier, while slightly licking the weight roller surface of the pulley and shifting it a little to the high rpm side within the range not exceeding 8000 rpm. View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI sepia, SUZUKI hike, SUZUKI hike, SUZUKI Address V(90-95), SUZUKI Address V(90-95)
Although it was cheap, it was thought that it was durable. (There is also a cause which is carrying out grease up frequently ?) WR of this size -- the other company -- a weight -- up to 8g -- about -- since it does not spread, Kn plan is used. I t
Although it was cheap, it was thought that it was durable.
(There is also a cause which is carrying out grease up frequently ?) WR of this size -- the other company -- a weight -- up to 8g -- about -- since it does not spread, Kn plan is used.
I think that 16 mm of WR(s) are the strongest to address v100 processing pulley.
View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI sepia, SUZUKI hike, SUZUKI hike, SUZUKI Address V(90-95), SUZUKI Address V(90-95)
Although it was cheap, it was thought that it was durable. (There is also a cause which is carrying out grease up frequently ?) WR of this size -- the other company -- a weight -- up to 8g -- about -- since it does not spread, Kn plan is used. I t
Although it was cheap, it was thought that it was durable.
(There is also a cause which is carrying out grease up frequently ?) WR of this size -- the other company -- a weight -- up to 8g -- about -- since it does not spread, Kn plan is used.
I think that 16 mm of WR(s) are the strongest to address v100 processing pulley.
View detail
Fits: SUZUKI sepia, SUZUKI sepia, SUZUKI sepia, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI Address 50, SUZUKI sepia, SUZUKI hike, SUZUKI hike, SUZUKI Address V(90-95), SUZUKI Address V(90-95)
Although it was cheap, it was thought that it was durable. (There is also a cause which is carrying out grease up frequently ?) WR of this size -- the other company -- a weight -- up to 8g -- about -- since it does not spread, Kn plan is used. I t
Although it was cheap, it was thought that it was durable.
(There is also a cause which is carrying out grease up frequently ?) WR of this size -- the other company -- a weight -- up to 8g -- about -- since it does not spread, Kn plan is used.
I think that 16 mm of WR(s) are the strongest to address v100 processing pulley.
View detail
Fits: YAMAHA JOG, YAMAHA VINO, YAMAHA AXIS 90, YAMAHA GRAND AXIS, YAMAHA SUPER JOG ZR, YAMAHA BJ, YAMAHA BWS100(BWS), YAMAHA BWS50, YAMAHA APRIO, YAMAHA JOG, YAMAHA JOG, YAMAHA JOG90, YAMAHA JOGC, YAMAHA YV50 Z II, YAMAHA JOG Zr, YAMAHA SUPER JOGZ, YAMAHA VINO(2Cycle), YAMAHA Remote controller jogZr
Not very effective in Normal spring.
Used in 4jp5APRIO
I was considering whether to use a stiffer center spring when I remembered this product, so I purchased it.
I thought that if I put the BearingSlider in before stiffening the Sensep, I would be able to apply a little more load to the Spring than in the OEM condition.
I'm not sure how effective it is, but I think it will be useful when I replace the Sensep and make it harder, because I think it will absorb the twisting.
As for the quality and texture, well, there is a slight BALI on the processed finish, so I lightly removed the BALI with sandpaper before injuring my hand.
The precision of the ball in the Slide section was also gurgling when turned by hand with load, so I put a few drops of Bell Hammer Gold on it and turned it by hand until it became accustomed to it.
The gurgling feeling is almost gone, but I think it is better to degrease the oil thoroughly before assembling because it may fly out.
I don't think it is necessary to add oil to the parts since they are not usually high-revving parts.
View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS (Bewith), YAMAHA Apprio, YAMAHA Apprio, YAMAHA Apprio, YAMAHA gear, YAMAHA jog, YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog (2 cycle), YAMAHA Jog ZII, YAMAHA Jog ZII, YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA jogpochet, YAMAHA Super Jog ZR, YAMAHA vino
0.It's a product for determining RollerSetting in 25g increments.
I was looking for a roller with 0.25g increments to fill a Weight RollerSetting and found this product.
5.0g×3 pieces 4.5g×I was running with 3 Settings, but I wanted to go a little heavier, so I changed 4.5g to 4.75g.
Scooter is fun to use, even with a total 0.75g increase, it changes the way it runs!
Durability has not been tested yet, but it would be great if it doesn't wear out as much as OEM.
View detail
Fits: HONDA clair-scoopy, HONDA Gyro UP, HONDA Gyro UP, HONDA gyro X, HONDA gyro canopy, HONDA Johno., HONDA Journo Clare, HONDA SmartDio, HONDA Dio (4-stroke), HONDA Dio (4-stroke), HONDA TODAY., HONDA Livdio ZX, HONDA Gyro UP, HONDA gyro canopy, HONDA SmartDio, HONDA SmartDio, HONDA byte
Unsure how long it will last as I don't trust the quality.
I decided to replace the Belt, Pulley, and Clutch because I have no idea how the drivetrain has been taken care of on a used car with unknown mileage.
The arrows are marked, so be careful of the direction when replacing.
When the belt cannot be attached, the clutch can be widened to allow the belt to drop down and rest on the shaft on the pulley side.
Even with a reasonable one, the speed is normal because it is new.
I don't trust this Manufacturer's products now, so I will use something else the next time I replace it.
View detail
Fits: YAMAHA VINO, YAMAHA VINO, YAMAHA VINO, YAMAHA JOG, YAMAHA JOG, YAMAHA JOG
sure
It makes city driving super comfortable. And the price is reasonable, thank you! View detail
Fits: YAMAHA Tricity155, YAMAHA tricity, YAMAHA Tricity155, YAMAHA tricity
It was cheaper than OEM Product.
I purchased this product as a Belt replacement for my Initial ModelBirdCity125.
The reason for our decision was that it was cheaper than OEM Product and we had used the same Manufacturer's product to replace the belt on a 50cc Scooter we had previously ridden.
The vehicle was bought used, so the BeltTrip was the same as the Odo, but the OEMBelt that came with it was not particularly thin or cracked…….
I hope this Belt will last as long.
The Roller was also replaced at the same time, and after the replacement, the start was smoother.
View detail