Reviews
Fits: HONDA gyro canopy, HONDA LEAD 50, HONDA LEAD 50, HONDA TODAY, HONDA DIO(4Cycle), HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA TACT, HONDA TACT, HONDA TACT, HONDA ZOOMER, HONDA SMART DIO, HONDA SMART DIO, HONDA SMART DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO, HONDA SUPER DIO
Too inaccurate to use!
It is so inaccurate that I can't use it at all because I can't fit it into a Large, and I can't move the Plate! I replaced it with an OEM one and it worked Smoothly. View detail
Fits: YAMAHA VINO, YAMAHA VINO, YAMAHA VINO, YAMAHA JOG, YAMAHA JOG, YAMAHA JOG
Pulley replacement for acceleration
Switched from a normal pulley to an external pulley for acceleration.
I asked the Motorcycle shop to help me. But I forgot to change the roller and the acceleration is not so good.
I am going to Motorcycle shop to replace it again because it is not stretched well.
View detail
Fits: SUZUKI Let's 5, SUZUKI Let's 4 Palette, SUZUKI Let's 4 Palette, SUZUKI Let's 4 Palette, SUZUKI Let's 4 Basket, SUZUKI Let's 4, SUZUKI Address V50 (4-stroke), SUZUKI Address V50 (4-stroke)
I was worried, but …….
It was the first time I had changed it and I was worried about it - but it ran fine. View detail
Fits: SUZUKI Address V100, SUZUKI address V125
I haven't used it yet, so I can't be sure
Purchased cheaply for maintenance -------------------------------------------- -------------- Buy cheap for maintenance. Powered by Google Translator View detail
Fits: KYMCO LOOKER 50, KYMCO SOONER 50, KYMCO SUPER9 50, KYMCO LOOKER 50, KYMCO SOONER 50, KYMCO SUPER9 50
KN Project Reinforced Slide Piece KYMCO type
I used it before and was happy with it, so I repurchased it. View detail
Cheap
ClutchJudder with Grease leak from Seal
While greasing up the Torque Camshaft, tweak it a bit with Minus and fit it face first with a plank and Hammer.
Shoe correction with Parkli and Paper
I don't know of any Judder complete cure holders.
Quantity:1 Set of 2pcs. at 1/4 of OEM price is amazing and tearful
View detail
Used on an ADDRESS V100 (CE11). It became comfortable.
I installed them on an ADDRESS V100 (CE11) that I purchased from Zimoti. I bought it because BeltOthers had already replaced it with a new one at the time of purchase but with NCNR, but it doesn't go up at all on a hill.... Strange, right? The BeltOthers were so worn out and the Weight Roller was so worn out that one of the rollers was facing sideways. I knew this was no good, so I installed them as I had learned on Youtube, and they went up the hill without a hitch.
It is important to learn and install the software in advance via Youtube, etc. An Impact wrench would also be very helpful.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX
durable belt
My motorcycle is YAMAHA NMAX155. This motorcycle has been driven for more than 20,000 kilometers. Recently, I feel that the belt is slipping, so I bought this KN Planning reinforced belt on webike, which can provide better than the original belt. Strong performance, the actual use of power is correspondingly more direct, and it is hoped that it will be more durable than the original one. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. This motorcycle has been driving for more than 20,000 kilometers. Recently, I feel that the strap has slipped, so I bought this Kn Planning enhanced belt on Webike. Strong performance, the actual use of power is more direct, hoping to be durable than the original factory. Powered by Google Translator View detail
Fits: YAMAHA AEROX125, YAMAHA AEROX155, YAMAHA NMAX125, YAMAHA NMAX155, YAMAHA NVX125, YAMAHA NVX155, YAMAHA BW'S125, YAMAHA SMAX, YAMAHA CYGNUS Griffith, YAMAHA MAJESTYS, YAMAHA AEROX155, YAMAHA NMAX155
You need modify to make it work
This tools introduce said that can be work for 24mm collar. But I can't use the 24mm oem collar put inside the tools. So I use the vernier scale to to measure that. The tool entrance side diameter only 23.5-23.6mm... This tools is expensive that make me disappointed.. Because I need modify to make it work.. View detail
Suzuki
Safely delivered...hope can get a good setup for my bike...will give more updates after tuning later...thank webike... View detail
Fits: YAMAHA BWS R2JS Taiwan, YAMAHA BWS 125 Type 2 BG1FOR JAPAN MODEL, YAMAHA CYGNUS X 5-inch B2J Taiwan, YAMAHA CYGNUS X 4-inch 2UB Taiwan, YAMAHA CYGNUS X 4 type BF9FOR JAPAN MODEL, YAMAHA BWS X46P, YAMAHA BWS 1255S9, YAMAHA CYGNUS X 3 Type 1MS Taiwan, YAMAHA CYGNUS X 3 Type 1YPFOR JAPAN MODEL, YAMAHA CYGNUS X 2 Model 4C6 Taiwan, YAMAHA CYGNUS X 2 Type 1CJ Taiwan, YAMAHA CYGNUS X 2 Type 28SFOR JAPAN MODEL, YAMAHA CYGNUS X Type 1 5TY Taiwan, YAMAHA CYGNUS X Type 1 5UAFOR JAPAN MODEL
Recall
OEM frail Nut before Recall and replace it. View detail
Fits: YAMAHA BWS 125 Type 2 Japanese specificationBG1, YAMAHA BWS R Type 2 Taiwan Spec.2JS, YAMAHA BWS X Type 1 Taiwan Spec.46P, YAMAHA BWS125 Type 1 Taiwan Spec.5S9, YAMAHA CYGNUS X Type 1 Japanese specification5UA, YAMAHA CYGNUS X Type 1 Taiwan Spec.5TY, YAMAHA CYGNUS X model 2 Japanese specification 28S, YAMAHA CYGNUS X Type 2 Taiwan Spec.1CJ, YAMAHA CYGNUS X Type 2 Taiwan Spec.4C6, YAMAHA CYGNUS X3 Japanese specification1YP, YAMAHA CYGNUS X Type 3 Taiwan Spec.1MS, YAMAHA CYGNUS X model 4 Japanese specificationBF9, YAMAHA CYGNUS X Type 4 Taiwan Spec.2UB, YAMAHA CYGNUS X 5 Japanese specificationB8S, YAMAHA CYGNUS X 5 Taiwan Spec.B2J
Yummy!
I feel that the sound is a little bit out of tune, but it is a Level that I don't mind. The anomaly is Smooth when wearing it. It is recommended to assemble the bearing part on the tray to avoid losing the bearing. I have heard that other manufacturer's products rosed after use, but this has not happened to me yet. I gave it 4 stars because I don't know how durable it is.
I have been looking for a new product for a long time, but I have not been able to find it.
I am not sure if they are the same product, but if they are, I would like to see the sales Gold amount standardized.
View detail
Fits: YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA vino, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh, YAMAHA VINOMolar feh
Failed after only 4000 km.
Purchased as a replacement for VINO (SA26J).
(The V Belt (which had been replaced at the same time as this assembly) was shattered after only 4000 km.
After replacing the V Belt at a Motorcycle shop, the car was shattered again, after only a dozen or so kilometers.
(The motorcycle shop had just changed the belt, but this time they didn't cut corners.) The clutch was also inspected.
Then, an anomaly was found in two Pulleys in ASSYRear.
V Not the surface that Belt hits.
The convex part of the Rear Pulley (SecondarySieveComplete) and the tubular part of the Front Pulley (SecondarySlideIngSieveComplete) that it is penetrating are wobbly and rickety when touched by hand.
This caused uneven rotation and the wavy V Belt seemed to break into pieces.
But to begin with, the two pulleys do not rotate separately, so the part is not even worn.
Cause unknown.
Was either Pulley a manufacturing defect with a shaky core?
Since it is an assembly, we did not disassemble it after purchase and installed it on the Motorcycle as is.
Other parts, the surfaces interfering with the shaft, are not worn.
Clutch plates are not so worn.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA BW'S R, YAMAHA BW'S 125, YAMAHA CYGNUS X
Affordable and helpful.
I purchased this because the Sender Nut came loose and damaged the Pulley.
It is helpful to have affordable parts for catchers.
The one I purchased this time also came with Pulley boss and was a great value.
It's my favorite Pulley and I'm sure I'll repeat it.
View detail
Fits: KYMCO LOOKER 50, KYMCO SOONER 50, KYMCO SUPER9 50, KYMCO LOOKER 50, KYMCO SOONER 50, KYMCO SUPER9 50
KN Planning Reinforced Slide Piece
I replaced it with a drive belt because there was sometimes a strange noise coming from the drive train while waiting at a traffic light or idling. The old Slide Piece had a large rattle, and the new one had almost none. The noise has been eliminated and I can ride comfortably. View detail
Fits: KYMCO SOONER 50, SUZUKI Address V100, KYMCO SOONER 50
KN Planning Domestic Reinforced Belt
I replaced it with a Slide Piece because the mileage was over 20,000 km and the drivetrain was making strange noises. Before the replacement, the speed was not high enough for the RPM and the fuel consumption was getting worse. After the replacement, the response of the Axel improved and the fuel consumption also improved. I have not used the Belt for a long time, but I would like to use it again next time. View detail
Fits: YAMAHA BWS(BWS), YAMAHA BWS(BWS), YAMAHA JOG (both FI Vehicles), YAMAHA VINO, YAMAHA VINO(2Cycle), YAMAHA VINO(2Cycle), YAMAHA Box, YAMAHA Old JOG (27V|48F|1HHH|1KX|1RN), YAMAHA Old JOG system (2EX|2TA|2TE|2JA|3CP), YAMAHA BJ, YAMAHA JOG-EX, YAMAHA AXIS 50, YAMAHA AXIS 90, YAMAHA APRIO, YAMAHA GEAR, YAMAHA GEAR, YAMAHA JOG, YAMAHA JOG (2Cycle), YAMAHA JOG 80, YAMAHA JOG90
OEM Replacement
Used on SA10J 2-stroke VINO.
2.I used it as an OEM replacement because it was inexpensive when I renewed the drivetrain after about 80,000 km.
I don't know the effect of this Single Body as I have changed other parts as well.
Quantity to Pulley:Set directions were not available.
The manufacturing is not comparable to OEM because of the price difference, but it appears to be solid with no BALI.
I don't know how durable it will be as I will be using it more and more.
The OEM Weight Roller had 28,000 km with only a little variable wear. The body is full normal.
I gave it a 4 star rating because it was a replacement for an OEM replacement consumable item, and I had no problems with it and the manufacturing was solid for the price.
If OEM is too expensive and you are having trouble replacing it, you can try this one.
View detail
Fits: SYM RV150, SUZUKI ADDRESSV125, SYM RV125, KYMCO GRAND DINK150, KYMCO GRAND DINK125, HONDA LEAD125, HONDA SPACY125, HONDA PCX150, HONDA PCX125
Replaced at 20,000 km
[How is it used?
Replaced after 20,000 km.
Acceleration and deceleration were normal.
How was your experience with it?
No different than OEMs
How did it compare to other products?
OEMLevel
[Points to note]
Note the direction
View detail
KN project for ADDRESS V100Drive face CE13A
Purchased as ReplacementParts for Drive face.
I have used KN Planning's Drive face before, and I trust them and bought it again.
Acceleration etc. after the replacement is also Smooth and no problem.
The supply of parts for the ADDRESS V100 is becoming more and more insecure, so we are very grateful to be able to obtain new drivetrain parts like these.
I would be happy if you could sell them for as long as possible.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
For those who say something is wrong with the CVT
[How is it used?
Required Repair Parts is Quantity:It comes in a set and is a Large variation bargain.
How was your experience with it?
I found this product when I was tossing parts into my shopping cart because I needed this and that. It had everything I wanted in one package, and it was useful, so I think it's perfect for the right person for the right job!
How did it compare to other products?
It's not often you find a Pack that's this helpful!
[Points to note]
Please check the applicable car model at the time of purchase.
View detail