Reviews
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS (Bewith), YAMAHA BWS (Bewith), YAMAHA Axis Street, YAMAHA Majesty 125, YAMAHA Cygnus Z, YAMAHA Axis Street, YAMAHA Majesty 125, YAMAHA Cygnus Z
I bought the lightweight version.
I bought the lightweight version.
Is the acceleration maybe better? I think so.
But the top speed dropped so much.
View detail
Fits: HONDA Smart DIO Z4, HONDA Smart DIO DX, HONDA clair-scoopy, HONDA Smart DIO, HONDA Lead 50, HONDA Journo Clare, HONDA Live DIO
Improved Performance
Throttle response is better. Weight roller has not been changed, but it is now lighter. View detail
Fits: YAMAHA BWS (Bewith), YAMAHA BWS (Bewith), YAMAHA champ, YAMAHA gear, YAMAHA Aero X50, YAMAHA Aero X50
ดีมากเลยครับดีกว่าหาสายพานมือสองมาใส่ ราคานี้ซื้อของใหม่ใส่กันเถอะครับ View detail
Fits: YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Model 4, YAMAHA Cygnus X Model 4, YAMAHA Cygnus X Model 5, YAMAHA Cygnus X Model 5, YAMAHA BWS 125 Type 2, YAMAHA BWS R, YAMAHA BWS X 1 type, YAMAHA BWS125 Type 1, YAMAHA MAJESTY125, YAMAHA BWS125 Type 1, YAMAHA Axis Treat, YAMAHA CYGNUS X Type 1, YAMAHA CYGNUS X Type 2, YAMAHA CYGNUS X Type 2
I'm not happy.
CYGNUS X.
It was hard to get it in. I couldn't get into it very well.
And when I test drove it, it was slower than NORMAL. It's slower than NORMAL. No maximum speed.
Wound was attached to the product from the beginning.
Another external Pulley was a completely different story and faster.
View detail
If your Scooter is running poorly, do it with a view to replacing it!
This is an Address V100 Initial Model that I got from Zimoti, and they said they had already replaced the Weight Roller, Belt, etc. It was NCNR, so I got it and drove it home on level ground, and at the time I thought the acceleration was strange. However, when I found the seller's bid record on Jimoti, I found out that the previous owner had just bought it a month ago, and he had sold it to me as a refurbished motorcycle that he had gotten at a bargain price. The scenario was that my previous owner also bought it with the same offer, but he thought it was no good, so he sold it with 5,000 yen extra, and I bought it without checking.
The symptom is that on a normal flat road, the car is scuzzy at the bottom and can accelerate rapidly to about 70km/h, but the acceleration is strange. However, when going up a certain hill, it drops to about 15km/h.
So I bought this Kit, prepped it on Youtube, and went ahead with the replacement. The previous owner had Belts, the WeightRoller replacement was a total lie, the WeightRoller was unevenly worn, the 1pc. was stuck in the wrong direction, the triangular part (I don't know the name) was not attached to the 1pc. and the Pulley was full of rust, the Belts were worn out. The belt was worn out.
This seemed to be NORMALWeight, but I thought I would focus on acceleration a little more because I am metabolic, but I used this as is to see how it goes with NORMAL for now. It's back to normal as if it was a lie. Thanks to this, now I can go up hills comfortably, and I use it for commuting and shopping.
As for the ease of installation, I myself had an Impact Driver and an electric Impact wrench, so it was extremely easy to install (thanks to the prep work on Youtube). I myself am a star Quantity:I am satisfied with the ease of installation of 5pcs.
However, if you don't have an electric impact wrench or something like that, you'll need to get some special tools, so I'd give it about 4 stars. However, if you replace it once, you can do it by yourself next time, and you may be able to get your money's worth. After all, the worn WeightRoller and Belt are consumables, so webike lovers should replace them.
View detail
Even a beginner can do it as long as he studies on Youtube and has the tools.
I used it to repair my ADDRESS V100 that I bought from Jimoti. I didn't complain about it because it is NCNR, but after I bought it, it runs on the flat ground, but when it goes up the hill, the gear shifting is strange. I did not complain because it is NCNR. When I checked carefully, I found that the previous Owner was sold to me one month after I bought it. I also found an article that the previous owner was selling the bike at a suspicious motorcycle shop, claiming that the bike was in great condition with Belt, Pulley, Weight Roller, Gear oil and Plug replaced. I found out that the former owner took it seriously and bought it. But when he got it, he sold it to me because it was strange. Well, I'm an idiot for taking it seriously, but ... .
I bought this parts from Webike to replace Pulley, Weight Roller and Belt. Belts were bought from Amazon Point. It was my first experience to replace them, so I did some research on Youtube and ImageTraining. The actual time was about 2 hours including cleaning.
When I disassembled the scooter, I was surprised to find that the motorcycle shop that sold many scooters in the dubious Jimoty in front of me (I don't have my own shop, I guess) had already replaced the scooter and it was in great shape, but it was a large lie. In addition, one of the triangular parts is missing, and the other side of the Pulley is full of rust. The other side of the pulley is covered with rust. It was not replaced a month or two ago, and one of the pulleys is turned sideways and does not roll. It's a terrible thing to buy, and I'm surprised that it was running well. Of course, the belt was not new either. I thought it was a lie to say that I had changed the gear oil, so I changed this too.
The weight is standard, so it is normal driving, but it can go up the hard slope very fast. Finally, the driving is back to normal. I myself bought a new ADDRESS V100 20 years ago (later it was broken and scrapped).
It is good for a beginner like me to have a set of Weight Roller, Pulley and so on. It was rather time consuming to clean the bike, but it was a great feeling to get it running again. I'm glad to have the experience that I want to replace Belt and Weight Roller on my other moped.
This is a photo of an old bad Pulley, WeightRoller. This is not good enough! It was my experience that it is better to get a used Scooter such as Gimoti on the premise of replacement.
I didn't take any pictures of the replacement because I wanted to finish it before it rained. The pictures here are the old parts that were originally attached. Let's replace it before it gets to this point.
View detail
Fits: HONDA Spacey 250, HONDA FUSION, HONDA FREEWAY, HONDA FREEWAY 250
I am generally satisfied with the premise that we don't demand the quality of the OEM Product
Judder came out at the time of starting soon after installation, Rose once and chamfer the Shoe side and Outer side with Sandpaper. (Assume.) But when I assembled it and repeated the start and stop several times, the Judder came out again. View detail
Fits: YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA Axis Street, YAMAHA Majesty 125, YAMAHA BWS125 (Bewith), YAMAHA Axis Street, YAMAHA Majesty 125
clutch shim .5 allow full spread on the rear driver pulley assembly.
apon inspection of the cvt the driver was not opening all the way. with the contra spring removed i spread the pulleys and notice it would open past the rim.so by adding the shim the torque driver opened .3 mm wider before contacting the clutch bottom and helped with the vino 125 top speed restriction. using a 47.7 boss vs oem 48.5, 20mm belt in stock length vs 22- 04 vino 125 TKW racing variator, 9g rollers, koso TD outer 50* slots with roller pins, ncy 1500 contra, ncy green clutch with red springs and .5 shim, performance friction drilled bell and .5 shim. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BWS X, YAMAHA BWS125, YAMAHA BWS R, YAMAHA BWS125, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Majesty 125, YAMAHA Cygnus Z, YAMAHA Axis Street, YAMAHA Majesty 125, YAMAHA Cygnus Z
high friction clutch bell worth every penny!
its lighter, drilled for cooling and has a friction surface. my stock bell was so blued and glazed over by heat. Scrubbing with stainless wire brush only helped so much. 04 vino 125 View detail
Fits: YAMAHA BW'S50, YAMAHA JOG Space Innovation, YAMAHA Apprio, YAMAHA Aplio EX, YAMAHA Applio Type 2, YAMAHA Remote Control JOGZR, YAMAHA JOG EX, YAMAHA JOG ZS, YAMAHA JOGZ, YAMAHA JOGZII, YAMAHA Axis 50, YAMAHA Super JOG Z, YAMAHA Super JOG ZR
I'm using it with no problems.
With APRIO2, I forgot to assemble the Washer of the seat to stop the KICKLever, the thickness of the Washer interfered with the OEM Product and caused wear on the OEM Product. After the exchange, the clamping of the mountain is good, and it is usable without a problem. View detail
It's the worst
I purchased this product after checking the product information many times and it is defective. I'm not sure if I can get the belt to hit the case or not. I would like to return it or replace it with a normal Drive pulley. View detail
Good
When I inherited ZOOMER that was left for 5 years, it was a replacement timing with 20,000km of mileage such as Belt cracks, WR one-sided loss, etc. I can't compare the performance because I haven't driven NORMAL, but it is very good and I am satisfied with it. View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus Z, YAMAHA BWS125 (Bewith), YAMAHA Cygnus Z, YAMAHA BWS125 (Bewith)
KN koso torque driver outer 48* & 50* straight ramps.
after installing a race variator it had the worst shift to high. no matter what i did with weights and springs. after adding the new outer driver with 50* ramps it became a dream. i tried both the 48* ramps i prefered the 50* slower shift. i have driver rollers to replace the pins on the way. i paid extra for fast shipping to the states. 100% happy with my purchase. i place a 2nd order with webike. they rock!!! 04 vino 125 TKW variator, NCY clutch, dr pulleys 10g, koso KN TD outer 50* ramps, Athena belt, air intake and loud pipe...parts ready to install or on the way- 150cc BBK with hot cam, roller pins, shims, power up shorter boss 47.7. 759-20 belt View detail
Parts were defective and could not be installed.
I couldn't get to the Ramp Plate because of the misalignment of the center of the spline hole.
It was obviously adulterated with a manufacturing defect that was distributed to the customer.
I'll contact the company you purchased it from immediately and attach a photo of the situation.
I applied for a replacement for the defective product, but I only received an email from the system's receptionist and no contact from the person in charge.
After 5 days, I finally got a call from the rep, only asking me to send them the car's name, model and VIN.
This product is sold clearly stating that it is compatible with all models.
Why do we need the type of
If you are forced to send the requested information
And then two days later, he asked me to send him a picture that shows the problem.
The answer came back to me. I was so appalled that I couldn't say anything.
It's disgusting.
I've filed a bad application with a proper photo first.
Are you looking at nothing and responding to Objection?
What have you been doing all this time to send me pictures now?
A totally insincere answer.
I'm sending you the pictures first, so you can see them.
When we contacted them, we made a mistake and they hadn't seen the photos.
I'll send it to the manufacturer now and see what they can do.
He said he was sorry.
At this point, it has been ten days.
Finally, 12 days after filing the Objection yesterday, we finally got the
I'm trying to get to the Gold level.
And the comments at the time.
It looks like the Hole Center is out of alignment in the photo.
It's just that the parts are shifted around in the picture.
It's possible that this is not a defective part due to a hole center shift
But just in case you're wondering, I'll return the gold.
Well, what a bad product you're distributing and you don't want to admit it.
Even more supercilious comments without sincerity!
I'm causing a lot of trouble for my customers!
I strongly vowed to never buy things from here again!
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Replace regularly.
The Clutch Spring seems to have broken, so we disassembled it and found a scratch in the Pulley and the Weight roller is also in the Quantity:2pc. The set was cracked.
I decided to change the Belt at the same time, and the Quantity:Buy the set product.
The original weight roller was 9g and this product's weight roller is 10g, so shifting is faster.
The top speed seems to have dropped slightly and the hills are a bit slow.
There is no problem for normal driving.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BW'S125, YAMAHA BW'S R, YAMAHA BW'S X, YAMAHA BW'S 125
If you want to have fun, this is it!
I was going to replace the CYGNUS Clutch Spring as it seemed to have gone bad, but I didn't have enough tools to take it apart, so I bought it from Assembly.
It wasn't difficult as I just had to replace the original Clutch.
I replaced the Belts and other consumables at the same time when I installed them.
After the run, I changed the Weight weight of the Weight from 9g to 10g, so the anomalies are faster.
I think the top speed is a little slower for that, but I don't think it's due to this product.
View detail
Fits: HONDA Superdio, HONDA Superdio, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles)
It sucks
How about aiming for the highest speed? So I bought it because it was.
But when I installed it, because the highest speed obviously fell, when I confirmed it in the homepage of KN Planning, it was said that it was possible to make more low GEAR.
What is the highest speed target? Bullshit.
View detail
Fits: HONDA Giorno2, HONDA Byte, HONDA CREA SCOOPY, HONDA GIORNO CREA, HONDA SMART DIO-DX, HONDA SMART DIO
Good
Today's weight roller was worn out, so I replaced it because of the noise. After replacing it, I changed the belt and move ball zip. Although the shipping cost is very expensive, it is an old model, so it is difficult to supply parts, and even if you try to order genuinely from Honko, if you look at all these things, in the end, buying it here or buying it doesn't seem to make much difference, so I ordered it. The postal delivery has been slow due to the Corona virus these days, so I didn't receive it as quickly as I thought, but it wasn't bad considering that it takes a month for delivery if I order from Ali Express. The product feels more luxurious than genuine, but I don't know if the driving performance is better than the genuine new one. Anyway, the 50cc output doesn't seem to make much sense to compare... I'm generally satisfied with it. Honko is very busy these days, so even if I try to order parts, they don't respond well. Considering the time cost, it seems like a direct purchase is the answer even if it costs a little more for shipping. Today's wait controller is worn out and replaced due to noise. I changed the belt and the moving ball house while I was replacing. The shipping cost is very expensive, but since it is an old model, it is difficult to supply parts, and even if you try to order Honko genuinely, it seems like there is no difference between buying and selling here. I haven't received the delivery as fast as I thought due to the slow delivery of the mail because of the corona these days, but when I ordered AliExpress, it took a month for the delivery period. Things feel more luxurious than genuine, but I'm not sure if the driving performance is better than genuine new ones. Anyway, it seems that the comparison is meaningless because the output is 50cc, but... I am generally satisfied. Honko is very busy these days, but even if he tries to order parts, he doesn't respond well. If you think about the cost of time, the fast delivery seems to be the answer. translated by Google Translator View detail
Fits: SUZUKI LETS4Palette, SUZUKI LETS5, SUZUKI LETS4Basket, SUZUKI LETS4, SUZUKI LETS4Palette, SUZUKI LETS4Palette
Pulley and Belt can be used, but
Pulley and Belt are available.
I think it's worth it just to buy two items.
The Weight roller/Slide Piece is not worth using!
Rather, using it will hurt Pulley.
Pulley can be used for processing!
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA BWS125(BWS), YAMAHA Axis Treat, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUSZ, YAMAHA MAJESTY125
Clutch bell
Great clutch bell. I bought it instead of the original one, since the original one was slightly bent and there was a slight vibration at the beginning of acceleration. This bell is exactly the same as the original one and the size and weight are the same, and the price is very good. When I put this bell, the vibrations disappeared. Great clutch bell. I bought it instead of the original one, since the original one was slightly bent and there was a slight vibration at the beginning of acceleration. This bell is exactly the same as the original one and the size and weight are the same, and the price is very good. When I put this bell, the vibrations disappeared. translated by Google Translator View detail