Reviews
Fits: YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
VINO125
The size and shape were the same, but a little cutting work was required, so if you have the tools, you can install it on the VINO125! View detail
Fits: HONDA CABINA 50, HONDA CABINA 90, HONDA LEAD 100, HONDA JULIO, HONDA TACT, HONDA LEAD50, HONDA LEAD50, HONDA TOPIC, HONDA LIVE DIO ZX, HONDA LIVE DIO SR, HONDA LIVE DIO J, HONDA LIVE DIO S, HONDA LIVE DIO J, HONDA LIVE DIO, HONDA LIVE DIO, HONDA BROAD50, HONDA BROAD 90, HONDA DIOFIT, HONDA SUPER DIO XR, HONDA SUPER DIO ZX
No problem, but...
Coupler is a little bit small and a little bit tight.
At first I thought I had the wrong part number because it didn't fit.
View detail
Fits: YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 1, YAMAHA Axis Street, YAMAHA GTR AERO 125, YAMAHA GTR 125, YAMAHA Axis Street, YAMAHA GTR AERO 125, YAMAHA GTR 125
Speedometer is now working!
I purchased the Speedometer for my CYGNUS X 2 model that I use for commuting because it stopped working.
At first I replaced the Meter cable, but it did not work, so I used the Meter gear from KN Planning this time.
I was worried about OEM, but KN Kikaku had a lower price and more color variations, so I would like to purchase from KN Kikaku again next time.
View detail
Cowl needs to be removed for installation.
It is installed on CYGNUS Glyphus.
Installation is a bit troublesome, as the cowl and front center of the meter need to be removed. It is safer to control the front and rear separately.
I chose Gold, but it is not visible even a millimeter because of the Rubber Cover that will arrive.
It is a recommendation because it allows you to cancel UBS without replacing the lever.
View detail
Required to unlock Combination brakes for BirdCity125
BirdCity125 (SEC-1J) I was not happy with the Combination brakes of the "M" and wanted to handle the front and rear brakes separately, so I recently did some research and the staff at the shop suggested that I might be able to find this product.
Combination brakes originally for CYGNUS Glyphus (The one that the Front also works when the Rear brake lever is held) I checked the part numbers in the Parts List and found that the BrakeEcoRiser for CYGNUS Glyphus 3 to 6 models and the '18 BirdCity125 are the same as the one for the CYGNUS Glyphus 3 to 6 models. (SEC-1J) BrakeEco Liza of (Parts ListNo.50) The parts model number was the same as that of the "I", so I thought, "Well, then, I can use it, can't I? I bought it.
There is no Instruction Manual, but the exchange procedure itself is Simple.
It was a bit tricky at the end because it was hard to put the lever pin back in.
After I finished assembling and gripping the lever, I was able to confirm the independent operation of the front and rear brake without any problems, but I had to grip it much deeper than before to make it work.
The capacity of OEMMaster Cylinder is 1/2, but I guess it is assumed to be Combination brakes.
I want to use BrakeSetting that works with Katsun, so my future plan is to replace the MASTER to increase the capacity.
In any case, I have to do it when I change to Brembo caliper.
If you want to dismantle the Combination brakes on your BirdCity125 and want to use neat parts, this is a good choice.
Nmax can also be used as long as the Parts model number is the same.
I don't know about ABSMODEL because my BirdCity125 is not ABS, so I don't know about the compatibility etc.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Used for CYGNUS-X
[How is it used?
Smoke Blinker made by MFR was used, but was replaced because the RightBlinker had a broken LED bulb.
Was the one you received as per Image?
I really wanted the Smoke Blinker made by MFR, but it was discontinued, so the Clear blinker made by KN Planning was installed.
Although the parts themselves are different in color, they have the same shape and can be installed in the same way.
Was the installation difficult?
Installation is easy as long as the Upper Cowl can be removed, and can be done with Bolt On.
How was your experience with it?
[Color] Although I preferred Smoke's DARK Image. [Color] I don't think Clear's Elegant is bad either.
I liked Smoke Blinker for daytime visibility, but at night. [Color] Clear looks more pleasantly bright.
[Was there anything that disappointed you?
To greed [Color] I wish I had Smoke. I should have bought it before it was discontinued.
View detail
To the vulgar Spec.
[Color] Smokey Blinker.
The Type that replaces the entire Blinker.
It is very difficult to remove Cowl.
If you don't mind, Lens cover is a better choice.
The price was reasonable, so I went for this one, but I regretted it.
View detail
![Clear Blinker Lens Set [CHALY Series / DAX Series]](https://img.webike-cdn.net/catalogue/14762/07261556_51f21da18e03a_TS.jpg)
Fits: HONDA Shirley 50., HONDA Shirley 70, HONDA Dax 70, HONDA Dax 70, HONDA dachshund, HONDA dachshund
The KN project is the best co-supervisor! ( ditto)
Anyway cheap (*/∀*)
Lightweight and easy to turn.
Nice color and good looking, man!
View detail
The durability is reliable.
The price is very reasonable and it's very convenient to have one in stock for emergency use if the headlight bulb suddenly goes out. View detail
For this price, this quality is good!
This is the type of thing you can put on top of it
I thought the Fitting was poor and the gaps and bumps were a concern, but not enough to bother me After that, I am concerned about the durability of Double-sided Tape and water erosion
View detail
It arrives early and goods are very appreciated.
The goods arrived quickly, the making also is solid, installation is still, but it was Large durable even if I tested the motion. (Wiring color is Red - Blinker Black - Because it was Position, Position was better except for Black. Since the installation is not done, the feeling of use is still unknown)
It was very cheap, I thought that it was cheap, but I betrayed expectations in a good way and I was able to do very good shopping.
Thank you.
View detail
![Universal Blinker Relay [MISUBA]](https://img.webike-cdn.net/catalogue/images/31959/12032221_529ddae1b6601_TS.jpg)
Good to have Parts
As I modified Main harness, I thought that I wanted to replace the old Blinker relay. It is truly appreciated that you can submit Parts that meet these old standards. I do not think we can make our own, but it is troublesome. View detail
![Universal LED Tail Lamp [STARTECH] Clear Lens [with Blinker]](https://img.webike-cdn.net/catalogue/14762/06042324_51adf8bae539a_TS.jpg)
Built-in Blinker is nice!
Go for a walk on the mountain in Motorcycle and defeat Motorcycle the Blinker behind will suffer the damage. Although it is also good to change to a Type that will not break, I do not like the appearance, so there is something more breakable, so it's bad so I made it a Tail built-in type. Because some processing is necessary, I think that it is difficult for beginners with electricity but it is worth challenging.
Greedy, it is better to reduce the Blinker LED by another : Pair (for Left and Right) I think that visibility will increase - - -
View detail
Fits: YAMAHA BWS100 (Bewith), YAMAHA Grand Axis, YAMAHA BWS100 (Bewith), YAMAHA Grand Axis
Since it was cheaper than the original manufacturer's product, it purchases. With especially no excess and deficiency. The rest is [ till when it has, and ] kana?
Since it was cheaper than the original manufacturer's product, it purchases. With especially no excess and deficiency. The rest is [ till when it has, and ] kana? View detail
He bought attaching the digital monitor of an active. A size is about [ just right ]. Since the bolt and color of two sizes were also attached so that it could attach to the place of a handle post, but it was short, it attached with the pure bolt
He bought attaching the digital monitor of an active.
A size is about [ just right ].
Since the bolt and color of two sizes were also attached so that it could attach to the place of a handle post, but it was short, it attached with the pure bolt only using color.
Since an angle did not suit, it bent well and has attached.
View detail
It attached to JOG. It is pleasing although it is a fine dress-up up. Since a price is also easy to attach at a low price, it is a recommend. Since it is general-purpose, there are some processings and a certain vehicle type.
It attached to JOG.
It is pleasing although it is a fine dress-up up.
Since a price is also easy to attach at a low price, it is a recommend.
Since it is general-purpose, there are some processings and a certain vehicle type.
View detail