Reviews
For prevention of dirt on rear suspension
Installed to prevent dirt around the rear suspension and link plate.
I was able to install it on our MAJESTYS without any particular modification, so perhaps it is designed for the previous term.
The texture is exactly like plastic, so if you are concerned about it, you may want to paint it black or the same color as the body.
The Screw rusted quickly, as everyone has said. Since it is not something that is frequently seen and is not a concern, we have not replaced it and have only treated it with a rust-converting agent.
This product is recommended not only for Fender Eliminator users but also for normal fenders, as it can significantly reduce mud splashes around the rear suspension area, Air cleanerBox, and Silencer.
View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
Installation on BirdCity300
I took on the challenge after seeing your predecessor's installation Impression, thank you for the detailed imp.
The processed parts were cut in three places, little by little, by repeatedly matching the parts. Since the material is soft, it can be formed using a small type of cutter and sandpaper, and the installation was completed without looking like it was made for another car model. 。 Removed or moved parts are SeatBox, Air cleaner box, Exhaust System, RightSuspension, Brake Caliper (Hose is still attached) 。 The photo shows the processed part of the SIDEBrake wire, which is very visible, so we spent a lot of time aligning it many times. We are satisfied with the beautiful fit.
View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
Mounting is Large!
I think it is a necessary standard equipment by any means.
Installed on a used XMAX I bought used, the Engine area was dirty…
I worked on the installation together with the driver's recorder, but the installation is complicated.
The mounting holes were extended and repositioned, the Air cleanerBox and other parts were removed, and the product was heated to soften it and somehow installed.
I hope it will operate smoothly and without damage thereafter…
View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
products worth buying
This is the second time for me to buy KN Planning carbon fiber pattern. I bought the NMAX155 version before, and the effect is very good. The installation of this rear soil removal is a bit more complicated. It needs to remove the exhaust and rear brake calipers to install it. If you don’t have the hands-on ability, it’s best to go to a professional car dealer for installation. -------------------------------------------------- -------- I bought Kn Planning for the second time to remove the carbon fiber pattern. I bought the version of the NMAX155 before, and the effect was very good. This rear soil is more complicated. You need to remove exhaust and rear brake calipers to install. If you do n't have a hands -on ability, it is best to go to a professional car dealer for installation. The installation effect is still good. You can avoid the mud water from throwing it to the engine. Powered by Google Translator View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Beware of similar products
The side where the bolt cannot be fixed has been processed so that it does not sag, and I am very satisfied with the finish. View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
CYGNUS XMonster energy
[How is it used?
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA BWS X 1 type, YAMAHA BWS125 Type 1, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 1, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 2, YAMAHA Cygnus X Type 3, YAMAHA Cygnus X Type 3
It eliminates the feeling of OEM being too long.
It required some modification of the mounting area and a bit of brute force, but I was able to get the Michelin Power pure [120/70-12] I was not able to get any interference with the Tire on the With the raised shape the Rear tire looks better from the back! View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
The work was Large strange, but I was satisfied.
XMAX does not have a rear fender, so I installed it as a countermeasure against mud splash. I spent a lot of time to install it while looking at the installation information on Net.
After installation, the Design is Match and I am satisfied.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X
Looks great.
Material:It is only Aluminum and is soft.
I'd be careful not to overtighten it.
View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
Installed on TRICITY300
I've been looking for an Inner fender because I'm concerned about a lot of mud splashing under the Trunk.
There was no setting for TRICITY300.
So I installed this inexpensive one for XMAX on my TRICITY 300.
TRICITY300 is not a compatible model, but there are many common parts and common design with XMAX.
I checked this product on the net and judged that it could be installed, so I bought it as a trial.
It is not a simple installation, but it is easy to install if you can do normal maintenance.
As a result of installation, I am satisfied with the OEM look and the mudguard effect is GOOD.
I'm not responsible for this, but I'll note the steps I took for reference.
There is an important note on the work at the end.
Remove the lower bolt of the Right SideRear suspension and make it possible to move back and forth.
Prevention of scratches and improvement of mounting flexibility.
Remove the exhaust system.
Don`t forget to disconnect the O2Sensor Connector! Disconnection is expensive.
Remove the clamp that holds the rear brake hose and SIDEBrake Cable.
Bolt1 pc.
In fact, it is better to remove the brake hose to avoid damage, but I rejected it because it is troublesome to remove the air.
Air cleaner is detached from Axle so that it moves up and down.
BoltQuantity:Hose off with 2pc + Axle.
Be careful not to scratch the surface when moving Case up and down.
Remove the Bolt1 pc from the Axle.
Do not use the Bolt attached to the product later as it will stop the product.
? Install this product.
It was very difficult to pass under the brake hose, but I managed to do it.
(It may be possible to cut a part of this product, but I gave up for fear of cracking when cutting)
The brake hose is tightened on the body with the clamp of ? Clamp the brake hose to the body.
Avoid the SIDEBrake Cable to the side and put it between this product and the Arm.
Pass the attached Bolt through the hole. Pass the attached bolt through the hole in the body and secure the body with Nut.
(This product and Axle interfered slightly and the fastening surface floated, so the interfering part was cut off.
(Nut's conclusion is easy once you get the hang of it)
One place in the fastening part used in XMAX is left because it is not in TRICITY300.
(After touching it, I determined that it would remain strong enough without it)
(Above. I gave up on it because I feared it might crack when I cut it. (This is the part where I said
If the Center of the Tire and this product do not match, try to modify the Clamp hole.
The point is to twist and Center out.
I was able to Center out OK with this, but I don`t know if it`s possible for all vehicles.
Even if it is difficult to center, there is no problem if it does not interfere with Tire.
? Assembly in reverse order.
(Important notes on the above work procedure)
Above ? to remove the O2 SensorConnector, but let's combine the Connector before IGNON!
IGOn without Connector coupling. O2 Sensor failure. would be recorded.
In this case, EngineCheckLamp will stay on if you don`t reset it in Shop.
(Must be a shop that can do YAMAHAMotorcycle's Reset)
I hope the above is helpful.
View detail
Fits: YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BW'S R, YAMAHA BW'S125
Screw hole accuracy…
I replaced the ugly OEMRear Fender with the Fender Eliminator.
Looks like Refreshing.
The mud splatter is a charm.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
The rear wheel is not throwing mud
My motorcycle is YAMAHA NMAX155. I bought this KN rear fender on webike. The original NMAX155 does not have a rear fender. The mud will be very dirty when it rains or on wet roads. With this The fender is so much better, the appearance of the fender is imitating carbon fiber, very handsome, and the webike shopping and shipping experience is good. ---------------------------------------------- My motorcycle is YAMAHA NMAX155, I purchased this KN rear fender on webike, NMAX155 after the original car with no fenders, rain or slippery road conditions will be thrown mud dirty, with this much better fenders, fender appearance is very handsome imitation carbon fiber, webike shopping experience a good fast delivery. Powered by Google Translator View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Includes for ReplacementBolt and Instruction Manual It's not, but it's manageable.
I installed it on BirdCity155, which is BlueCoreENG, which is common with N-MAX. I cut the rear fender so that I can replace the rear suspension. I've installed it, for Replacement 20mmBolt is not included in the purchase. You will need. You can fix the part that touches the body of the car firmly by attaching 3mm thick rubber or plastic board. View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
It's quite good
i didn't have a mudguard on the back of my xmax so I found this and decided to buy it
Unpretentious Material:It looks like an OEM product because it is Carbon Style
The product needs some work, but it's a good one
I wanted an instruction manual and another Screwle
With a little knowledge, the installation is sturdy enough for Large
View detail
Fits: SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125G LIMITED, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G LIMITED, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G
good product
I am already ordering the second wing, the first one crashed in an accident, there are no complaints about the quality. It is important that it does not protect from dirt, it will not be possible to remove the factory wing and put it on. I am ordering the second wing, the first one crashed in an accident, there are no complaints about the quality. It is important not to protect from dirt, it will not be possible to remove the factory wing and put it. translated by Google Translator View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
It's inconspicuous, but self-contained!
The construction is solid Installation accuracy is also good, Bolt1 pc fixation seems to be no problem
Installation is also Air cleaner's BoltQuantity:I only had to remove 2pc and managed to get it in from the side
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Fixing method is bad.
Because it is a single Screw, do not stick straight.
I am slightly bent..
However, the function has been properly rolled off and the dirt near the Air cleaner has become less.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
The center is off.
There is neither instruction manual nor installation Instruction Manual.
I did not arrive straight because it was a Bolt 1 pc stop.
It is shorter than expected, and the effect may be low.
It's not too stylish and something disappointing.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Maybe it looks good
I heard that under the Fender is soiled well, while the body is still new
I thought that would be installed.
For installation, remove Cover of Air cleaner
I forced it in a form that it was pressed in..
It looks like it's under Fender, so I do not quite understand it
It is good as self-satisfaction.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
A little point
Since Fender is White, I think that a slightly darker color will be conspicuous, but I am unifying AnodizedParts with Basic Gold, so I chose Gold this time. Installation is simple as it removes OEMBolt and attach it. View detail