Reviews
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
Easy to install
I had been interested in these Parts for a long time, but I wish I had bought them earlier because they are easy to replace and functionally the best in terms of cost performance.
I don't ride much, but I hope that Spring won't be damaged and that it won't affect Seat and the body of the car.
View detail
Fits: HONDA Claire's Coupe AF55, HONDA Claire's Coupe AF55
Wrinkle is noticeable.
The entire pull will be Wrinkle. View detail
with Rubber so it can be used for Seat cover or reupholstery.
[How is it used?
Seat of LITTLE CUB, which was given to us and had been neglected for a long period of time, was exposed to UV rays and had some tears. Let's reupholster it honestly." I wandered around Webike's site and came across this product.
The fabric is thin, but the OEM is also thin, so I have a faint hope that it will last a long time as long as it is kept out of the UV rays in the garage or body coverretc. when not being ridden.
How was your experience with it?
I am very satisfied with the large cover, as it has improved the comfort to the point that it would be rude to compare it to the aging OEMSeat Cover.
How did it compare to other products?
There are some inexpensive Seat Covers on the market, but I could not find a color tone that I liked, and color custom orders were too expensive, so I was wandering around Webike's site when I came across this product. Seat Grips. The stability of the event is irreplaceable.
[Points to note]
In my case, as I mentioned above. Seat cover. The assumption is that it is being used as a For re-covering Seat fabric, not as a
1. To remove the old Seat Cover, remove the Seat from the car body (the Seat can be removed by removing the two Bolts at the tip) and then unscrew the Bracket (Bracket plastic) that is fastened to the base behind the Seat, one by one, in a humble manner.
Remove the old skin and check the damage to Seat's sponge, and correct it if necessary.
3. Put the new Seat Cover on the front and back using a Tucker (a device similar to a large-mesh Stapler).:Pair (for Left and Right) (The front part is difficult to fasten with a standard tucker, so in some cases, a small wooden screw is used to fasten it.)
4. Put it back on the car body and you are done.
Other items that would be helpful
【Included Parts:presence or absence】.
One brief instruction sheet is included in the Seat Fabric Body.
If you are new to this, it may be difficult to understand, so please use each video Site. Motorcycle Seat Replacement Please search in etc.
[ITEMS TO BUY TOGETHER
Slotted screwdrivers and radio pliersetc. are helpful when removing old Seat Covers.
When attaching a new Seat Cover, you will need a Tucker & Staple to proceed with the work itself.
[Opinions and requests to Manufacturer
I would be very happy if there were more color variations, just a typical color pattern would be nice.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Convenience (*^^*)
[How is it used?
For everyday use.
Was the one you received as per Image?
Yes
Was the installation difficult?
It requires a bit of hang time, but I don't think it requires a particularly high maintenance level.
How was your experience with it?
First of all, it is a passing grade!
[Included Parts:were they on?
Not particularly.
[Was there anything that disappointed you?
If I had to pick one thing, it would be the speed of Spring's Downs...
[Others]
As you can see in the other impressions, Seat jumps up at a good rate right after installation, so you need to be careful not to get punched in the face.
When Spring is up and running, the Quantity:Pair (for Left and Right) I think there is no problem since it opens to the "1" position, but it bothers me, so I put the Aluminum collar in and held it in place.
It's been 2 months since the installation and the Seat bounce is now about 45 degrees.
I don't have any problem in using it, but Spring's Downs are a bit fast... (´-ω-) woom
View detail
Fits: HONDA CT125, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
dress-up and
I was considering the Cover because the Motorcycle Cover rubbed against the Seat during windbreaks and left white streaks that I could not get rid of no matter what I did. When the Cover is installed, there is a wrinkle on the SIDE, but I think it will grow (as the temperature rises) as I use it (photo attached). The fit is good, and it is perfect for hiding dirt on the Seat. The price is also good. View detail
CF50
I put it on a CHALY 50 with a square eye. View detail
What about Handling Instruction Manual?
I have not installed it yet, but…
Is there a Handling Instruction Manual?
The ManufacturerHP states that **Some Cut of Seat base is required for installation. The manufacturerHP states "Some Cut of Seat base is required for installation;
It seems the only way to install it is to do it on your own.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
CYGNUS riders can't go wrong with it!
When I put something in the space under the Seat of CYGNUS, even if I open the Seat with the Handlebar set to Left, the opened Seat hits the Handlebar and I have to hold it down with my hand to close it.
With the Seat Spring Damper, when the Seat is unlocked with the key, the Spring will automatically open and remain open even if the Handlebar is turned off.
However, it opens quite vigorously, so it would be better to hold it by hand when unlocking it.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Convenient
Seat will open on its own if you put this on. Too convenient.
Also for preventing forgetting to close the door.
You will have to hold it a little bit to close it, though.
There is no such thing as an instruction manual, so use your imagination.
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
Forgetting to lock the Seat has also been resolved.
I installed it because sometimes the seat lock was not done.
If you don't close it tightly, Seat opens easily, so it helped me not to forget to lock it.
You can install it just by removing the Nutx2 from Seat side and install it like the picture.
It is easy even for beginners.
The color is your choice as it is mounted in an inconspicuous location.
View detail
Fits: HONDA DIO(4Cycle), HONDA DIO(4Cycle)
Seat cover of DIO
I replaced the Seat cover of DIO because it was torn. It took a long time because I was not familiar with it, but I was able to replace it without getting wrinkle. However, when I used it for about two months, something like a white line came into Seat. I don't know if the installation was bad or the quality was bad, but it became so. View detail
Fits: SUZUKI ADDRESS V50, SUZUKI ADDRESS V50
Seat cover of Address
The costa rica was good, but it was not possible to replace it well. I myself have never reupholstered Seat, so I had a little wrinkle. If you are used to it, you may be able to do it well. View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125LIMITED
Size is just right but fixed is better than just covering it.
The seat cover of the ADDRESSV125G K6 had a tear, and SeatRepairTape was put on, but there was a new tear on the seat outside of RepairTape, so I ordered this Seat cover. The size is just right. The size is just right. But, even though the Cover is Exactly hitting the Urethane underneath, Wrinkle can be made. The size is fine, but the wrinkle is still there regardless of the original seat. Then, I changed to fix it with Gun Tucker. The size is right, so I hooked it from the front side, and pulled it to the back, and covered it first. From there, it enters the fixation work. It continues while seeing the state of Wrinkle little by little. After all, I think that I can go without Wrinkle when I repeat the temporary stop and the fixation many times, but work ends in the moderate place. As for the article itself, even if it is cheap, I feel that it is a good thing. After that, it is the problem of the existence of the work technology to put up. Well, because I think that I can also prevent the seepage of water of Urethane, I am satisfied. View detail
ZOOMERCustom
It is a product that makes the Custom feeling stronger.
The fabric is thick, so the mounting was strange Large.
View detail
Fits: HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA little cub, HONDA little cub
When Seat starts to wobble.
The seat of CUB is not easy to hold, but it may wobble with age.
The wobble was so bad that I opened the Seat and found that the …Seat hinge Bolt was missing.
I was so curious that I replaced the Hinge itself, not to mention the Bolt.
good point
Just replace the OEM Hinge.
The durability is not bad.
Easy to buy price.
It can be used not only for OEM Seat but also for external Seat.
A bad point
If you don't tighten it tight enough, it will wobble.
Unlike other motorcycles, the seat of the CUB is not a fixed type, but a seat on top of the fuel tank, which can be opened at any time.
This makes it easy to move the hinge, so there is a lot of movement of the hinge, so there are many times when you notice that the hinge is broken.
If you think it's a little weird, check out Seat hinge. It will affect the ride quality.
View detail
Flat Parts are easy to paste
It is easy if the surface is small and simple, such as Side cowl of NAKED.
Warm it up with the Dryer and stretch it while applying it so that no air gets in.
Hang was overstretched. "Eye. Do not warp the
Also, cut more off the ends to get around the back.
If the parts you use are large or the surface is complicated, the difficulty level will increase.
It is Recommendation to try from the small and simple part such as Tail cowl first.
I tried it on the Side cowl of my VCR and it aired out beautifully, so I peeled it off immediately.
If you are a dexterous person, you will soon get good at it.
View detail
Very good quality
Received the seat after 3 months, which I was expecting because of the covid19 constraints. The seat was very well packed in a box full of air cushions rounding all the product. There was no damage at all. The product itself seems to have very high quality, it's very well made, the stitches are just PERFECT. It includes the hinge bar and the sealing rubber, below. I'm very happy with this buy. The final price (to Portugal), that includes the product, the transportation and de customs clearance was 90,00 EUR. 5 * View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Satisfied with the cost performance
I used it for AXIS 90 I bent the gold needle of Spring to fit the seat shape as shown in the picture The plastic on the Mount side was also shaved so that the Spring can be mounted It doesn't take a lot of time and effort, but the spring's needle is hard and I had to cut the plastic to fit the spring Shaving is also Large strange for manual use, so you need a variety of tools The tools I used are as follows
1.Electric Small TypeBelt Thunder
2.Electric Disk sander
3.Tire LeverQuantity:2pc (used for spring bending)
4.Vise (used to secure the spring)
5.Cutter
In case of diversion, if you have the machining skills and tools, we will recommend this product to you
View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
I'm glad I bought it!
There is a CYGNUS (?) If you open Seat with the Handlebar turned off, it will hit the Handlebar Symptom of not being able to hold the Seat open I've always been annoyed, but this Spring is the answer!
Here's a summary of the good and bad points
[Good]
Seat opens by itself
You can keep the state of SeatOpening at any time
Easy to install (I was wondering if I had to hold Spring closed and install it like I was forced to (It wasn't at all, and it was super easy to install.)
[Bad]
Spring's Creak sound is bothering me (It's already been lubricated and resolved.)
Seat crashes into the handlebar as it opens vigorously (Opening it with your hand is a solution.)
As a result, it was a Large satisfactory purchase
I didn't want to waste all that time wondering if I should buy it or not! I should have bought it earlier! (Lol)
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
Fine
My best purchase, very convenient. For two years, not much has rusted, but this is nonsense. The trunk opens immediately from the turn of the key. My best purchase is very convenient. For two years, not much rusted, but this is nonsense. The trunk opens immediately from turning the key. translated by Google Translator View detail