Reviews
ZOOMER's Custom
Thank you very much for the fast shipping and careful packaging. View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith)
Easy to install
I had been interested in these Parts for a long time, but I wish I had bought them earlier because they are easy to replace and functionally the best in terms of cost performance.
I don't ride much, but I hope that Spring won't be damaged and that it won't affect Seat and the body of the car.
View detail
Demon150GR key cylinder for decoration.
[How is it used?
I dislike the various letters on the key cylinder.
Demon150GR key cylinder as an ornament.
Was the one you received as per Image?
Aluminum Cut-out with good texture
I chose black, but there are many colors to choose from, so other colors may be available.
Was the installation difficult?
Since the size of the Seal and Parts are Exactly, if a mistake is made in affixing the Seal, the Seal will protrude.
It stuck out a little.
How was your experience with it?
I am satisfied because the letters are mostly hidden.
[Included Parts:were they on?
Seal is included, but in a format that you apply yourself.
High degree of difficulty. Strong adhesion.
[Was there anything that disappointed you?
Seal could have been one size smaller.
Really ExactSize.
May stick out if gapped.
Dexterous people will be able to apply it without mistakes, but clumsy people will be glad to have the Seal applied in advance.
View detail
For prevention of dirt on rear suspension
Installed to prevent dirt around the rear suspension and link plate.
I was able to install it on our MAJESTYS without any particular modification, so perhaps it is designed for the previous term.
The texture is exactly like plastic, so if you are concerned about it, you may want to paint it black or the same color as the body.
The Screw rusted quickly, as everyone has said. Since it is not something that is frequently seen and is not a concern, we have not replaced it and have only treated it with a rust-converting agent.
This product is recommended not only for Fender Eliminator users but also for normal fenders, as it can significantly reduce mud splashes around the rear suspension area, Air cleanerBox, and Silencer.
View detail
Required for Fender Eliminator vehicles.
To increase the rigidity, I used Cemedine's METAL LOCK to fix the License Plate Holder firmly and attached it to the Reflector Bracket. View detail
Use with Bush Face's License Plate Holder.
I combined it with PolishFace's License Plate Holder. I use Cemedine's METAL Lock to fix the Holder and Bracket tightly. It has a good feeling of rigidity. View detail
For a little Accent
[How is it used?
The bolts that hold up the exterior of my long-owned motorcycle have become rusted over the years, If we're going to replace the Bolt anyway, let's put some Accent in it." This product was purchased to match the Cap bolt with the
The several color variations are useful because they allow Spacer to be used in accordance with the color of the car body.
Was the one you received as per Image?
Standard for this type of aluminum spacer. FUJI TUBO type. The product was just as beautiful as the image on Webike's website, and it was exactly as shown in the image, without the uneven staining that is common in low-priced aluminum collars from other companies.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
It is not lightweight, reinforced, etc. (strictly speaking, there is a slight increase in color), and it costs a lot of money, but I like this kind of product, and I am very grateful for it.
The appearance is that of the FUJI TSUBO Type Design from a generation ago, so in the age of 2025 Fashion!" I'm not a middle-aged person, but I'm not a trendy middle-aged person.
[Included Parts:were they on?
None
2 piecesQuantity:The price for the set is 880 yen, and I would appreciate it even more if it were a little cheaper, but the product is out of season, so I guess I should be glad that it is on the market.
[Was there anything that disappointed you?
If you like the design as shown in Webike's image, you can buy it. Disappointing. It is lightweight enough.
Make good use of the wide selection of 9 colors to add flair to the Accent of your car body.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
The ease of understanding is at the top level, so I don't think that wrong usage is likely to occur (unless you get twisted and use it in a different way on purpose).
[Notes]
None in particular, in Color variations. The color tones are different from what I saw in the picture." There may be some things that are not so common in motorcycle accessory stores anymore, but that may not be a problem.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Since it is like a collar, please purchase a cap bolt of each material & length that you want to install.
[Opinions and requests to Manufacturer
It is easy to purchase large quantities if the price is a little lower, so a quantity of 10 pieces is 10% cheaper.:A Set would be even more appreciated, please.
View detail
Fitting is outstanding!
The fitting is good and I am satisfied with Large! View detail
with Rubber so it can be used for Seat cover or reupholstery.
[How is it used?
Seat of LITTLE CUB, which was given to us and had been neglected for a long period of time, was exposed to UV rays and had some tears. Let's reupholster it honestly." I wandered around Webike's site and came across this product.
The fabric is thin, but the OEM is also thin, so I have a faint hope that it will last a long time as long as it is kept out of the UV rays in the garage or body coverretc. when not being ridden.
How was your experience with it?
I am very satisfied with the large cover, as it has improved the comfort to the point that it would be rude to compare it to the aging OEMSeat Cover.
How did it compare to other products?
There are some inexpensive Seat Covers on the market, but I could not find a color tone that I liked, and color custom orders were too expensive, so I was wandering around Webike's site when I came across this product. Seat Grips. The stability of the event is irreplaceable.
[Points to note]
In my case, as I mentioned above. Seat cover. The assumption is that it is being used as a For re-covering Seat fabric, not as a
1. To remove the old Seat Cover, remove the Seat from the car body (the Seat can be removed by removing the two Bolts at the tip) and then unscrew the Bracket (Bracket plastic) that is fastened to the base behind the Seat, one by one, in a humble manner.
Remove the old skin and check the damage to Seat's sponge, and correct it if necessary.
3. Put the new Seat Cover on the front and back using a Tucker (a device similar to a large-mesh Stapler).:Pair (for Left and Right) (The front part is difficult to fasten with a standard tucker, so in some cases, a small wooden screw is used to fasten it.)
4. Put it back on the car body and you are done.
Other items that would be helpful
【Included Parts:presence or absence】.
One brief instruction sheet is included in the Seat Fabric Body.
If you are new to this, it may be difficult to understand, so please use each video Site. Motorcycle Seat Replacement Please search in etc.
[ITEMS TO BUY TOGETHER
Slotted screwdrivers and radio pliersetc. are helpful when removing old Seat Covers.
When attaching a new Seat Cover, you will need a Tucker & Staple to proceed with the work itself.
[Opinions and requests to Manufacturer
I would be very happy if there were more color variations, just a typical color pattern would be nice.
View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
Installation on BirdCity300
I took on the challenge after seeing your predecessor's installation Impression, thank you for the detailed imp.
The processed parts were cut in three places, little by little, by repeatedly matching the parts. Since the material is soft, it can be formed using a small type of cutter and sandpaper, and the installation was completed without looking like it was made for another car model. 。 Removed or moved parts are SeatBox, Air cleaner box, Exhaust System, RightSuspension, Brake Caliper (Hose is still attached) 。 The photo shows the processed part of the SIDEBrake wire, which is very visible, so we spent a lot of time aligning it many times. We are satisfied with the beautiful fit.
View detail
แผ่นติด พรบ สีสันสวยงามเข้ารูป View detail
CT 125 Flat Front rack
Good quailty,well packaged and fitment was spot on! Very pleased with the functionality and this this will be very useful. View detail
It looks strong
I thought it would be difficult to install this type of rear rack because of the defect rate, but fortunately, it was installed without any problems. Unlike how it looks, the allowable kg is low, so I think I need to put up light luggage View detail
รองป้ายพลาสติกทะเบียน kn ใส่แล้วดูดี View detail
To VINO.
It could be installed on SA26JVINO. View detail
Fits: HONDA CT125, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
dress-up and
I was considering the Cover because the Motorcycle Cover rubbed against the Seat during windbreaks and left white streaks that I could not get rid of no matter what I did. When the Cover is installed, there is a wrinkle on the SIDE, but I think it will grow (as the temperature rises) as I use it (photo attached). The fit is good, and it is perfect for hiding dirt on the Seat. The price is also good. View detail
ตอนนี้ได้รับแล้ว รอไม่นานถือว่าไวมากๆ สั่งมาหลายรอบแล้ว สินค้าตรงตามสั่งทุกครั้ง ไม่เคยมีชิ้นไหนชำรุด หรือ เสียหาย สวยงามตามรูปใส่แล้วรถดูสวย ราคาถูกกว่าที่อื่นเยอะเลย โดยรวมถูกใจมากๆ เดี๋ยวสั่งของเรื่อยๆๆแน่นอนครับ View detail
สวยงามแข็งแรง ถูกใจแถมยังได้รับของไวอีกต่างหาก ราคาไม่แพง น่าเก็บสะสมมากคับ View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
products worth buying
This is the second time for me to buy KN Planning carbon fiber pattern. I bought the NMAX155 version before, and the effect is very good. The installation of this rear soil removal is a bit more complicated. It needs to remove the exhaust and rear brake calipers to install it. If you don’t have the hands-on ability, it’s best to go to a professional car dealer for installation. -------------------------------------------------- -------- I bought Kn Planning for the second time to remove the carbon fiber pattern. I bought the version of the NMAX155 before, and the effect was very good. This rear soil is more complicated. You need to remove exhaust and rear brake calipers to install. If you do n't have a hands -on ability, it is best to go to a professional car dealer for installation. The installation effect is still good. You can avoid the mud water from throwing it to the engine. Powered by Google Translator View detail
I am satisfied with the quality over the price.
I am very satisfied with this purchase, it is well needed for the price and the finish is beautiful.
This product seems to be the same product that another manufacturer also produces, but their evaluations indicate that the quality of the product has some loose quality, such as the hole positions do not match and the loading hooks are not oriented correctly.
However, the product I purchased was accurate and I had no problems installing it.
View detail