Reviews
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA FORCE, YAMAHA BW'S125, YAMAHA BW'S X, YAMAHA BW'S 125, YAMAHA BW'S R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA SMAX, YAMAHA SMAX
The color was what I wanted.
There are four in total, but the bolt behind the Right Side did not fit, so I had to file down the body and managed to install it. I think it is an individual difference, but this is acceptable. I am glad that it was only this much because it is a visual effect part and if it needs to be modified so much that it changes from the original model, it would be meaningless to replace it. View detail
For CROSS CUBJA45.
Texture is sufficient
Unlike KITACO products, the letters are not engraved.
Double-sided tape seems somewhat unreliable
View detail
coordination required
The OEM Carrier was RustRust and did not look good, so I bought this one. When installing it, the bolt holes were gapped by about 5mm on the One Side, so I widened them by force to match the holes in the car body. View detail
Large carrying capacity which makes it perfect for loading up the Monkey for a weekend away
About quality and texture, I can confirm that the quality is good and that the material used is steel tubing and finished with a black painted coating before I had the chrome plated finish added to better suit the styling of the Monkey. About the feeling of use, This rear rack has a large carrying capacity which makes it perfect for loading up the Monkey for a weekend away . Products to buy together, To get the most use out of the rear rack if styling is not your solo purpose it would be ideal to add a small tail bag to your cart so the option to carry a small load is always available to you. Difficulty of installation, I can say the fitment of the rear rack was very easy due to the simple nature of the install and relatively easy access to the four mounting points to secure the rack with the included hardware and some original hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a rear rack with a great carrying capacity but the finish was not to my liking. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA CHALY, HONDA SMART DIO Z4, HONDA LIVE DIO, HONDA LIVE DIOJ, HONDA LIVE DIOS, HONDA LIVE DIOSR, HONDA LIVE DIOZX, HONDA SUPER DIO, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA SUPER CUB, HONDA PCX125, HONDA PCX150, HONDA Spacy100, HONDA TODAYTODAY, HONDA DIO DIO, HONDA DIO DIO CHESTA, HONDA Giorno
Looks cool.
Anyway, since it is a race ish, it is similar to KITACO's discontinued product, but if you put it on CHALY and start off on a slope, high-octane gasoline will leak just a little bit, but I forgive it because it looks cool! View detail
Custom
Recommended for those who do not want to put CALSeal directly on the License Plate! View detail
Fits: YAMAHA BWS125 (Bewith), YAMAHA BWS125 (Bewith), YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Convenience (*^^*)
[How is it used?
For everyday use.
Was the one you received as per Image?
Yes
Was the installation difficult?
It requires a bit of hang time, but I don't think it requires a particularly high maintenance level.
How was your experience with it?
First of all, it is a passing grade!
[Included Parts:were they on?
Not particularly.
[Was there anything that disappointed you?
If I had to pick one thing, it would be the speed of Spring's Downs...
[Others]
As you can see in the other impressions, Seat jumps up at a good rate right after installation, so you need to be careful not to get punched in the face.
When Spring is up and running, the Quantity:Pair (for Left and Right) I think there is no problem since it opens to the "1" position, but it bothers me, so I put the Aluminum collar in and held it in place.
It's been 2 months since the installation and the Seat bounce is now about 45 degrees.
I don't have any problem in using it, but Spring's Downs are a bit fast... (´-ω-) woom
View detail
Fits: YAMAHA JOG APRIO, YAMAHA JOG APRIO, YAMAHA JOG APRIO
Mounted on SA10JVINO?
It was diverted to SA10JVINO!
Quantity to be installed under Seat:The spacing for 2pc Screws can be done without modification!
The problem is the screw mounting on the number, but the mounting angle of the Carrier is different from that of the Screw (the hole position is perfect).
If you are capable of Pipe bending, you can bend that part by machining and install it.
I was not able to process it, so I followed the steps below.
1 Temporarily fix Screw and Carrier on Number
Quantity under 2 Seat:Hook the 2pc bar to the Screw coming out of the Body by force.
3 The rest is forcefully installed by screwing.
That's all for SA10J! However, I don't recommend this because there is a strange tension on the screw part.
I also don't recommend it for those who want to level out the floor.
However, I was able to graduate from the Carrier refugee program in SA10J!
I'm hoping this will allow me to load my Rear trunk ?.
View detail
Material:Aluminum, but heavy in its own way.
When used as a Sticker Plate, it is mounted on the Left side of the Number, so the KN imprint is on the reverse side, facing sideways.
It is a little too big to use as a Key Holder.
I'm not the only one who thought it came with a Key Holder in addition to the Plate.
View detail
Takeline
The quality is ok, the instructions were also ok and easy to install. A slightly smaller size than the picture suggested. Well, the appearance of the mank still changed for the better. -------------------------------------------------- -------- The quality is ok, the instructions were ok and easy to install. Slightly smaller size than the picture given. Well, but the appearance of the man still got better. Powered by Google Translator View detail
Fits: YAMAHA XMAX300B74 Taiwan specifications, YAMAHA XMAX300B74 European specifications, YAMAHA XMAX300B74 UK specifications, YAMAHA XMAX300B74 Australia specifications, YAMAHA XMAX250BG6 domestic specification, YAMAHA XMAX300, YAMAHA XMAX300
Mounting is Large!
I think it is a necessary standard equipment by any means.
Installed on a used XMAX I bought used, the Engine area was dirty…
I worked on the installation together with the driver's recorder, but the installation is complicated.
The mounting holes were extended and repositioned, the Air cleanerBox and other parts were removed, and the product was heated to soften it and somehow installed.
I hope it will operate smoothly and without damage thereafter…
View detail
CF50
I put it on a CHALY 50 with a square eye. View detail
Maintenance around the rear suspension is easy.
When modifying the rear suspension area, removing and installing the OEM air cleaner duct (?) is quite a hassle. When modifying the rear suspension area, it is quite troublesome to remove and install the OEM air cleaner duct (?).
[How is it used?
daily use
Was the one you received as per Image?
Slightly cheesier (PeLePera + a little less molded)
How was your experience with it?
no problem
[Points to note]
nothing special
How did it compare to other products?
The ones from other manufacturers are quite expensive, but this one is reasonably priced!
Point and hang of installation
Hexagonal Wrench and +Driver are required for OEMDuct removal.
The process takes about 15 minutes, of which about 14 minutes is for OEMDuct removal (it's pretty tricky).
Installation is only by tightening 3 ScrewScrews.
It looks neat and makes it easier to replace the Rear suspension and install the Side bagBracket.
View detail
high level of cost performance
I was concerned about small dust particles because it was an inexpensive product, but once it was installed, there was no problem. I think the cost performance is good because it is definitely cheaper than other companies' products.
It was easy to work with and required no processing. I am generally satisfied.
View detail
It looks better.
When I changed carriers, I was using the AirFilter Duct in the opposite direction, but it didn't look good, so I bought this product.
I thought it was a bit expensive, but there were no alternatives and this was the only choice.
The adhesion of the net part came off when the screw was tightened, but it was repaired with adhesive and used again.
View detail
What about Handling Instruction Manual?
I have not installed it yet, but…
Is there a Handling Instruction Manual?
The ManufacturerHP states that **Some Cut of Seat base is required for installation. The manufacturerHP states "Some Cut of Seat base is required for installation;
It seems the only way to install it is to do it on your own.
View detail
ได้รับสินค้าแล้วครับ/ตรงตามที่สั่ง/สิ้นค้าไม่เสียหายใดๆ/ใช้เวลาในการส่งไม่นานมากครับ/มีโอกาสจะคงสั่งต่อไปครับผม View detail
It was installed without any problems.
Originally, this product was designed to be used without the OEMRear Carrier, but I was considering purchasing it to remove the OEMAir Filter Cover because the OEMAir Filter Cover was in the way when I loaded luggage in the front with the OEMRear Carrier, and it was difficult to attach the luggage strap for fixing the luggage. I was considering purchasing this product to remove the OEMAir Filter Cover.
There are other similar products, but they are more than twice the price of this product, and there are also some impressions that the position of the mounting screw does not fit, so I hesitated to purchase this product. We purchased this product because of its reasonable price and Webig's product conformity guarantee.
The installation was done without any problems, with no misalignment of the screw hole positions.
The mesh for air intake is bonded under the right side of the product, but it is a little bit messy, and when I lightly touched the mesh with my hand, part of it peeled off.
When the filter is installed, there is a gap between the motorcycle body and the upper back side. Rainwater and insects may come in, but water will escape through the mesh and insects will be blocked by the filter.
Compared to other existing products, it seems to be better, including the price.
View detail
Fits: YAMAHA AXIS 90, YAMAHA JOG90
Is it the best of what is available?
The screw is installed with a slight twist because there is no grommet and the accuracy is not very good. Also, depending on the fit of the shroud on the engine side, it may be necessary to cut the part where the oil hose passes through, or some other modification may be necessary.:I think Carbon Style is beautiful, and although there are two other products for 3WF available on the international Site, I think it is the best product available as new with manageable and acceptable accuracy. View detail
More Orange than I expected
I've been using a ninja Tank Pad for a long time, but I had to replace it due to a makeover.
I've been using red as a color since my motorcycle is all black, and I found just the right one.
The Instruction Manual is well translated (there's a notation that you can type in here) and comes with a stain remover, which is nice.
I think it's difficult to re-paste once it's on the screen, so I took a center and pasted it all at once.
The color is more orange than I expected, but it's nice.
View detail