Reviews
Koo~ Oshii ?? (?"-??? -?) ?".
I used to get frustrated when I couldn't remove the CALI Sticker from my Number because I couldn't remove it to Beauty, but thanks to you, I'm going to be free from frustration ^^.
I think it is a good purchase because it can also serve as one point of dress-up.
…… is,
When I installed it, it was too close to the NumberLeft hiragana, so it took about a quarter of the time as it was.
The hole was enlarged horizontally in Drill and shifted to the Limit to finally achieve the current shape (see image).
I can't say for sure, because the form of Number varies from region to region, but at least in my area Number requires processing ^^;.
I also thought it would have been better if the four corners were slightly rounded.
View detail
Insufficient strength
Material:It is aluminum, so be careful not to overtighten. It can be easily broken. View detail
poorly made
Installation is easy enough for anyone to install without any problems.
However, the air intake netting is just popped on with Bond and comes off with just a touch of the finger.
Even though it is made in Japan!
I was disappointed.
As shown in the image, the Bond installation of the netting can be taken off loosely.
View detail
The quality is poor.
When I first received it and unpacked it, it was in good condition. Even at the time of installation, the appearance, sense of stability, and other
All parts were satisfied, but the bolts were removed during the installation process.
After tightening it to some extent, the paint suddenly burst and peeled off.
It was very dissatisfied and immediately removed and discarded. -------------------------------------------------- -------- The condition was fine when I opened the packaging after the initial pick. At the time of installation, The parts were all satisfied, but the bolts during the installation process Suddenly, the painting bursts and peeled off to some extent. It was very dissatisfied and was removed and discarded. Powered by Google Translator
View detail
Fits: YAMAHA SMAX, YAMAHA Majesty S, YAMAHA SMAX, YAMAHA Majesty S
Belt life extension
Clearance with crankshaft for belt adjustment is a little wide. View detail
One point
Purchased for Scooter's One point.
The parts from KN Planning were used in the drive train.
Even a beginner could put it up with no problem since it is a small text-less Sticker.
It has been six months since I put it on and the durability has been fine so far.
To buy a by-the-way.
View detail
Installed after Carrier replacement
I purchased this product for post-processing of air filters as they were replaced from OEM Carrier.
It is very simple to make and costs almost 4,000 yen? But it may be inevitable because the quantity is not available.
It is fastened with three screws, but when fastening, there was a snapping sound and the mesh part came off.
Since they are only attached with glue, the initial glue seems to dry and peel off easily.
Now that it looks cleaner, I'll use it for a while anyway.
View detail
After all, … low-priced products
I bought it because I was using an OEM compatible from another company and it went bad quickly.
After all … it is what it is.
It looks good attached in the picture, but the bottom part of the Shield seems to melt easily in the heat….
I've bought this kind of compatible product 3 times… probably the same total Gold amount as buying OEM.
good point
Inexpensive. Easy to obtain.
If you think of it as a painting base, it is.
A bad point
Thin and low strength.
Heat sensitive.
The durability is low, so you may end up having to repurchase many times, and in the end, it is cheaper to buy OEM;
It is often the case that even a battered used CUB has an intact leg shield.
Don't be a cheap buyer.
It is still available and I will use it, but next time I will not hesitate to go OEM.
View detail
My bad!
I am ashamed to say that I bought this product without checking the fitment and dimensions carefully. Why I didn't check it properly....
There is no problem at all as for the quality of the adhesion of the reflective material which was a little uneasy for the price, and there is no peeling of the paint.
The dimensions didn't match, but I was able to adjust them by offsetting with a cheap bracket from Home center, so that's good! Be sure to check the measurements! (naturally)
View detail
Fits: YAMAHA Cygnus X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA BW'S R, YAMAHA BW'S125
Screw hole accuracy…
I replaced the ugly OEMRear Fender with the Fender Eliminator.
Looks like Refreshing.
The mud splatter is a charm.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Includes for ReplacementBolt and Instruction Manual It's not, but it's manageable.
I installed it on BirdCity155, which is BlueCoreENG, which is common with N-MAX. I cut the rear fender so that I can replace the rear suspension. I've installed it, for Replacement 20mmBolt is not included in the purchase. You will need. You can fix the part that touches the body of the car firmly by attaching 3mm thick rubber or plastic board. View detail
Cheapness and quality replaced by etc
The OEM Carrier of LITTLE CUB is too small to carry anything, so it is for touring I bought it in
The LITTLE CUBOEM Carrier is cute looking, so that's fine The fatal flaw is that if you load up all your stuff in a can-two or something like that, you lose the stability I knew it would have to be the CUB Carrier, which was born to carry things
So, you have the option of buying an OEM CUBCarrier or choosing a fine Carrier outside the company I've been thinking about it, and the OEMs are expensive to start with, and if you're only going to use it for touring then it's not that expensive Parts are rejected because they cannot be attached
Then the fine Carrier outside the company
This one seems to be of good quality and seems to have a high suitability for touring, but it's still expensive
Personally, I don't think there is anything better outside of the company than the OEM
Because it's Parts made by Elite and others at the insanely big Large company So I'm more of an OEM guy, which is a reasonably expensive outside and expensive OEM, but they're both expensive Nothing?
The one chosen was this guy, a cheap Copy product
appearance
There are some mysterious markings on the surface, like scraped traces of gold, but from a distance, they look like they've been scraped off Shiningly
It's BALI-like, but not so much as cutting your hand off or anything
It's cheap, so that's about it
attachment
I knew it was obvious, but I couldn't get the Refreshing to arrive because of the distortions and the width of the bracket Spread it out with Power and Quantity:Pair (for Left and Right) Quantity of Washer in:Pair (for Left and Right) I feel like I'm going to have to change it and make it work But well, it's cheap, so oops!
loading
This is a no-brainer
It's a normal ride and it's properly fixed
It's totally possible
You should be able to meditate on a few shortcomings when it can do its job properly for this price
Keep using it...
Rust came out when I left it outside in rain or shine for about 3 months If you brush it, it might be large and strong
Well, this is called a do-it-yourself feeling
Cheap and expendable
I think it's a good cosmetic for people who can generally divide it up
I care about the details Clean is best If it's not processed NG, you shouldn't touch it
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Fixing method is bad.
Because it is a single Screw, do not stick straight.
I am slightly bent..
However, the function has been properly rolled off and the dirt near the Air cleaner has become less.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX 155
Maybe it looks good
I heard that under the Fender is soiled well, while the body is still new
I thought that would be installed.
For installation, remove Cover of Air cleaner
I forced it in a form that it was pressed in..
It looks like it's under Fender, so I do not quite understand it
It is good as self-satisfaction.
View detail
Not the exactly red and need stick the sticker yourself
Second transaction in webike, I choose KN Planning Key Box Cover since it is cheap and seem beautiful in the photo. I think it is just for the view and so I dont need to buy it expensive. And also it is famous brand in motocycle so i am very trust to buy it When i receive it, I found the red is different from the photo shown in webike, there is a little pink red of it. Not the exactly big red that I like. So I have a but diappointed of it. Also it use the sticker to stick it. but the sticker you need to put yourself. so a bit trouble and easy to stick wrongly. Anyway, it's OK. View detail
It is Image.
As I tried installing it, it was Image, but I thought that it was somewhat cluttered every time I saw Visual from behind for a few days I removed it.
It is nice to be able to stick the Simple, mortuary liability Seal beautifully, but for that I thought that it might not bother to increase Parts.
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Exactly
Is Fit feeling perfect?
It is even better if it's a bit soft inside?
The price is a bit expensive, is it good for scratch prevention measures? (* ? ∇ ? *)
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Processing Base Kana ,,,
It is cheap! Thin! Purple (?_?) BALI is out!
The position of the hole is also subtle! (; ???) Why is there a Double - sided Tape called? (Lol)
I think that there is no problem if it is Processing Base.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Whether to find value depends on people
【What made you decide the purchase?】
Because there was no other Manufacturer issuing Winglets.
【How was it actually used?】
Although it is my personal opinion to the end, I thought that the price is somewhat higher due to quality.
Whether it feels appealing to this product or not depends on people.
About the quality of the product itself
First of all, the material of the product itself is cheap and not as bad as it is, but BALI remains
It can not be said that good construction is not good.
Also, since there is no Instruction Manual for product installation, I do not know well how to install it, I examine it in various ways, look at the picture of the product guide of Manufacturer, finally understand how to put it in some way.
■ Effect
Because I am a street-riding Main person, I do not know the effect of Winglett.
Although I bought it with an appearance emphasis, the loneliness of Front I felt in YZF - R 25 (Satisfactory) I think that it was buried.
【Was it difficult to install? (Hard parts case)】
Confused because there is no Instruction Manual about installation.
Also, the position where Double-sided Tape is attached can not be especially.
Why did you put here?.
Please find images of installation on MOS's page.
(I'm not sure I'm also there... )
【Please tell me the installation point and hang (Hard parts case)
Nothing in particular.
However, Double-sided Tape which is attached to the product from the beginning has poor affinity with the product itself,
It almost does not make sense of Double-sided Tape. (It will peel quickly)
I think that it is better to replace the Double-sided Tape to be used with a powerful one.
(I'm worrying about making it Magic tape. )
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of Hard parts, none.
[Is there anything I was disappointed about?]
There is no installation instruction manual.
The affinity between Double-sided Tape and goods is too bad.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think the installation Instruction Manual should be attached.
Moreover, it seems that it is better to review the material of the product itself or change the type of double-sided tape.
【Have you compared items?】
nothing special.
[Others]
I wrote about various products, but I think Concept itself is good.
Somehow Front site will change the impression of R25 which is unsatisfactory altogether.
Because the Winglet for R25 is not very much (it can be obtained even with Yahoo auction etc., but the price is high. )
, I personally think that if there is something that is Painted or if the installation method is solid, it will be popular.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
Cospa, appearance, functionality is good.
I attached it to ADDRESS V 125S.
Drill, use Thunder, also remove Helmet in
I installed it.. It was a big thing..
of course, "125 S" It is purchase, installation, knowing that it is not conforming.
Attached is attached, but considerable time and effort
Let's prepare.
But,
There was a hard time, "Burn" And Helmet in opening
It looks convenient to use.
View detail