Reviews
Fits: YAMAHA 7PSJOG, YAMAHA JOG, YAMAHA JOG, YAMAHA APRIO, YAMAHA APRIO, YAMAHA VINO, YAMAHA VINO
Expectations for corresponding products
I have received a response from Manufacturer, so I am adding this.
The defect was confirmed and returned Gold response.
It does not seem to be structurally designed to cause operational problems depending on the car model, so I am sure that this will be addressed when the product is next released.
I am attaching a photo for your reference.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA FORCE155, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA NMAX125, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100
Useful for keeping out the cold
Purchased to keep the cold out of my Motorcycle (GN125H) for city commuting.
Since it is a universal product, it was inevitable, but the position was not good when it was popped in, so the Bracket was bent to adjust the position.
Mirror is co-tightened, so hang is required to fix the Visor and Mirror while keeping their positions at the same time. This should not be a problem if two people work on it.
After about a week of installation, we found a crack in the bracket fixing part of the Visor. Although it had not yet cracked, I repaired it by plastic repair and put a rubber sheet in between the bracket and the mounting part to prevent vibration. After that, there was no progression of the crack.
The key is that the thermal protection is satisfactory.
Minor problems but cosmetic enough.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA FORCE155, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA NMAX125, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100
Useful for keeping out the cold
The position of the bracket was not good when it was mounted on the bracket, so the position was adjusted by bending the bracket.
Since both Visor and Mirror are tightened together, hang is required to fix them while keeping the Visor and Mirror in position at the same time. This should not be a problem if two people work together.
After about a week of installation, we found a crack in the bracket fixing part of the Visor. Although it had not yet cracked, we repaired it by plastic repair and put a rubber sheet between the brackets to prevent vibration. After that, there was no progression of the crack.
The key is that the thermal protection is satisfactory.
Minor problems but cosmetic enough.
View detail
Fits: HONDA Dio (2 Cycles), HONDA Livudio SR, HONDA Dio (2 Cycles), HONDA Dio (2 Cycles), HONDA Superdio, HONDA Superdio, HONDA Livudio SR, HONDA Livdio ZX, HONDA Livdio ZX, HONDA Livdio ZX, HONDA livudio, HONDA Livdio ZX, HONDA livudio, HONDA DIO [Dio]., HONDA DIO [Dio].
Hurry for Repair
If you want to replace it for the time being, it may be a good idea, although its durability is unknown. There is no reason not to choose OEM, but I just used it because it was too much trouble to search for parts. They always seem to have them in stock. View detail
PVAccelerator cable
I used it on my '93 NA12A EPO50.
Because Throttle Wire and Oil pump wire are divided into two halves in the middle, it is difficult to make Wire by oneself, so I really wanted to use EPO50 OEM Parts, but it seems to be discontinued, so I had no choice but to use it.
I thought that Throttle and Oil pump could be turned at the same time with this because it was delivered and it was two-way, and I was relieved, but the Pitch of the carburetor side of the Throttle Wire of the photograph did not match and it was unavoidable. I assembled it.
And now, since the part is for TS50 HUSTLER, it is too long for EPO50, so I thought what to do, and I had to choose whether I should turn it around or cut it. After fitting the Oil pump wire and Throttle wire, I turned the bottom of Seat, and put Handlebar to Quantity:Pair (for Left and Right) I assembled it so that the pulling condition would not be bad by cutting it into
I was able to integrate it for now.
Then I started the engine and Idling was good and Axel opening and closing was good, but it looked a little worse.
Now you can shop at EPO50 again.
The result is not so bad, but if you want to imitate my work, please do it at your own risk.
View detail
For the visually inclined.
Purchased for replacement of YB-1Four.
This is a very visually appealing product. If visibility is the priority, no recommendation is made.
MirrorThe length of the arm is short and the mirror is small, so it looks better.
If the Plus screw for adjusting the angle of the mirror surface is exposed to the wind and rain, it will rust easily.
It is preferable to keep them in an environment that is at least resistant to rain.
View detail
Fits: Others Right10mm Normal Thread Screw Hole/Left10mm Normal Thread Screw Hole
Overall, it's good, but..
It is the Mirror with the same sequential blinker built-in, and there were many complaints I bought it from KIJIMA's TECH07
The Design is generally rugged and the textures and details are a bit cheap, but Compared to the TECH07, which had difficulty in fixing the bracket because of too much angle of the bracket, the usability is much better This one is better The blue lens is also a nice touch
Blinker LEDs emit a clean light at a constant speed, right to the edge, all the way through However, the time lag between the blinker lights off and the return of Position is unusually slow It takes about three seconds (laughs)
Compared to the TECH07, which switched instantly, this is the most Large MinusPoint
View detail
Fits: YAMAHA Jog 90, YAMAHA Jog 100, HONDA Honda Dio series, SUZUKI address V125, YAMAHA JOG 50 series, YAMAHA Cygnus X, HONDA Honda Dio series, SUZUKI address V125, YAMAHA JOG 50 series, YAMAHA Cygnus X
It is not Rubber's Grip.
Material : I thought that it was Rubber's Grip, but not the Rubber, I felt the feeling of wearing it with winter Gloves, worried about hardness compared to OEM, it took me about 2 days to get used to it. For installation, it is necessary to press Mirror 's Bracket with one hand and press it all the way, Material : It was more difficult than Rubber. However, Material : I expect that it may be more durable than Rubber. View detail
Excellent Cost performance
It was not possible to purchase because the inside diameter of Handlebar made in China is different.
But it was a thing that I liked
I tried hard by processing Rubber but it was impossible.
I got angry so I could force it in with Hammer and fit it snugly.
Conclusion, it is useless for Chinese Handlebar.
Chinese handlebar is useless.
Handlebar is useless.
View detail
Disappointing!
I bought it because I wanted Mirror of a round shape of old style and the price is cheap.
I never saw the contents after purchasing, found Wound on one Mirror at the time of installation.
There is no problem even if there is a Wound in Cover, but Wound is useless for Mirror.
Unfortunately, there is no evaluation of visibility. Wound disturbs.
Cost performance is awfully bad due to Wound.
The shape is good, the back can be seen properly, it is a good item if it is decent.
I use Opposite Thread Screw Adapter to install Right Side.
View detail
Ideal for Touring
There were people who were wearing well when I went to Hokkaido three years ago. I said that it is best for Long touring,
The first time I bought it with Napps. Because I did not know Wa Big. I became a member and purchased it.
It was half of Nappus. You can also use it with the feeling that you use it lightly hanging on the palm of the Right hand.
View detail
Installation notice
I think Grip heater itself is good, but the attached Bond is too quick dry!
I tried to install Parts cleaner at once, but it settled on the way, and it did not move either in front or behind ...
I could not remove it even with a release agent of adhesive and I bought it again.
Personally I recommend using Bond of Motorcycle Manufacturer.
In addition, Quantity : Pair (for Left and Right) I want you to be able to purchase even Single Item.
View detail
Fits: YAMAHA General purpose mirror screw diameter 8mm|10mm vehicles, SUZUKI General purpose mirror screw diameter 8mm|10mm vehicles, SYM General purpose mirror screw diameter 8mm|10mm vehicles, KYMCO General purpose mirror screw diameter 8mm|10mm vehicles, HONDA General purpose mirror screw diameter 8mm|10mm vehicles, YAMAHA General purpose mirror screw diameter 8mm|10mm vehicles, SUZUKI General purpose mirror screw diameter 8mm|10mm vehicles, SYM General purpose mirror screw diameter 8mm|10mm vehicles, KYMCO General purpose mirror screw diameter 8mm|10mm vehicles, HONDA General purpose mirror screw diameter 8mm|10mm vehicles
Smaller than OEM,
I think that it is smaller than Mirror of the OEM of klx 125,
The easiness to see is this one!
And light! Cool !!!
I installed the Check in Large strange but the adjustment, not the installation, is Large strange.
I need Hexagonal Wrench.
And, because it fixes the tightening hand with Hexagonal Wrench, it is likely to break.
Well, I think I will purchase this even if it breaks.
View detail
Fits: YAMAHA Jog 90, YAMAHA Jog 100, HONDA Honda Dio series, SUZUKI address V125, YAMAHA JOG 50 series, YAMAHA Cygnus X, HONDA Honda Dio series, SUZUKI address V125, YAMAHA JOG 50 series, YAMAHA Cygnus X
It is cheap and secure
This time, I bought this item for Grip exchange.
I bought this item for the first time with a body looking for a high Grip of Cost performance.
Compared to the Grip of the TZ Type I used before, this Grip has a slightly thick and thick groove in the Rubber, so it feels hard to get tired.
However, Rubber's own Grip power is somewhat inferior to TZ Type, and the operability will decrease...
Let's choose according to the application
View detail
Although texture is cheaper,It is reverse, if a Switch is attached at this price and a Switch will carry out from ordinary feeling also by good! at the time of ON, after the RUN Switch has gone up! Since it was nine poles when a Coupler was VF.Those with
Although texture is cheaper,It is reverse, if a Switch is attached at this price and a Switch will carry out from ordinary feeling also by good! at the time of ON, after the RUN Switch has gone up! Since it was nine poles when a Coupler was VF.Those with the necessity of buying the Coupler which suits by a vehicle type!, but there is no Switch of a light and I think that goods good functional exactly are only this Type! View detail
Fits: YAMAHA Jog 90, YAMAHA Jog 100, HONDA Honda Dio series, SUZUKI address V125, YAMAHA JOG 50 series, YAMAHA Cygnus X, HONDA Honda Dio series, SUZUKI address V125, YAMAHA JOG 50 series, YAMAHA Cygnus X
In XR50 motard, a crack goes into a grip by fall. Since this product was found when handy replacement parts were looked for, it purchases. Delivered goods are not the touch which the thickness of enough of a rubber has, compares that it is pure, a
In XR50 motard, a crack goes into a grip by fall.
Since this product was found when handy replacement parts were looked for, it purchases.
Delivered goods are not the touch which the thickness of enough of a rubber has, compares that it is pure, and is inferior in texture, either.
Considering being cheaper than honda brand-name parts, it may be able to be called inexpensive goods.
Although it may be unsuitable for the direction which searches for the quality of higher levels, such as a feeling of a hold which sticks to a hand, those who think wants at a handy price can enough recommend you about the same engine performance as pure.
Grip end of troubled is not flat uniquely and it is that there is a strange projection.
When asking a picture is differed from, it was goods underwent the model change.
Since I like flat grip end, a demerit mark is given to this portion.
View detail
Because plating is sweet to a regrettable thing, rust has floated in it by the use for about one month. It is sweet although it is not like [ which cannot use the attachment part of a mirror and a shaft, either ]. Is it the place of being reasonab
Because plating is sweet to a regrettable thing, rust has floated in it by the use for about one month.
It is sweet although it is not like [ which cannot use the attachment part of a mirror and a shaft, either ].
Is it the place of being reasonably priced?
View detail