Reviews
pretty, beautiful
I think it's expensive compared to its function. However, it goes well with the motorcycle and helps it reliably when you brake. View detail
GB350S Engine Guard installation
There is no clearance between the Torque wrench and the Pipe when installing the Bolt, so it is difficult to do. It is recommended that two people work together. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Compatible with normal top bridge and aluminum top bridge made by KITACO
Speedometer, which is difficult to read, is now easier to see.
The OEM Meter location is hard to see and the Main key is difficult to find because of the digital tacho attached.
It was difficult to operate, so I changed it while replacing the LightAssy,
Fixing Meter is Material:Since it is only a Rubber Pipe, there is a slight concern about deterioration.
Style-wise, it's generally as I expected, but the key cylinder is a bit exposed.
I'm curious to see if something can be done about it.
View detail
Right size
Found this fog light attractive and the size is just nice to fix it on my MT09. It would be great if it's come with dual colour. Quality is excellent. View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA HRC Grom, HONDA HRC Grom, HONDA NSR50, HONDA NSR80, HONDA NSF100, KAWASAKI Z125 PRO
Good for dress-up
When we switched to KITACOAxle Shaft this time, we also installed this Protector!
I was torn between this and other Manufacture's products, but the Black color and not too flashy was the deciding factor!
I think it would be safe in case of a fall.
Mounting is both front and rear.
View detail
It looks good
Installed at the same time as KITACO's Hollow Axle Shaft.
To be honest, I could not experience it, but the suspension was unified in Black and tightened.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
I was prepared, but ….
The Gasket could not be removed and was reused, although it was inexpensive and ready to go. View detail
Fits: HONDA HRC Grom, HONDA HRC Grom, HONDA glom, HONDA glom, HONDA glom
Circuit driving essentials
I use the Handlebar Stopper on my circuits and I love how easy it is to install. I have fallen down several times, but thanks to the Handlebar Stopper, my car body is almost unharmed! (Bar End and Step end of Handlebar are just about shaved off.)
However, the welds are weak, and once you fall down, the welds will come off. (...;)
It is not strong enough. It would be better if it were welded firmly.
View detail
Fuel adjustment is easy.
Used for NINJA2 Helmet 50RSL used for Circuit Racing.
I chose this product because I was told by a trusted shop, AdVise, that this product would be sufficient for use in combination with the Slip-on Silencer.
It is a little troublesome to have to remove the Cowl to install it, but it can't be helped.
View detail
Fits: HONDA MONKEY125, HONDA glom, HONDA HRC Grom
Black color Simple
I replaced the front and rear Sprocket with Chain on my 2021 Grom JC92. 1 Driven Sprocket to Long and left the Driven Sprocket at 38 and it seems to run very good for me. The KITACO Driven Sprocket is black, unlike the Normal Sprocket, so the suspension feels tighter. View detail
Couplet-on and easy!
It is often said that the Light of CT110 HUNTER CUB is dark, but it is really dark.
When you enter a dark Tunnel from a bright place, such as an old Tunnel at night or even during the day, you can't see anything.
So, after considering the introduction of KITACOLED Shuttle Beam with Mukawa and KITACO's auxiliary light, they purchased KITACOLED Shuttle Beam.
Installation is completed by connecting the Connector such as Couplet-on and Switch to Headlight's Attachment power supply.
If anything, it took a little more time to remove the Headlight Connector and the power supply coupler.
I turned on the auxiliary light installed in the nighttime test,
Satisfied with the brightness of the front and both SIDE of the car body hand of the Normal headlight.
I am not sure about the durability as I am just starting out, but I am a little concerned about wet weather and washing the car as it was not marked as Completely Waterproof.
、
View detail
Fits: HONDA APE 100 TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Balance of practicality and price
We replaced it at the same time when we replaced the Chain on the APE 100TypeD.
The replacement will be from OEMSprocket.
There is no problem in use. If you just want to replace it, installation is easy.
However, if you want to work more precisely when installing the Sprocket on the Wheel, it may be better to have a little ingenuity and a certain level of maintenance skill. However, since there is a lot of play in the diameter of the holes, there is a little less than 1mm of space between the Stud bolt and the Sprocket. Therefore, the center of the wheel and the center of the Sprocket must be aligned before tightening the nut, otherwise the wheel will be shaky in the circumferential direction when it rotates.
I think it is possible to improve the tolerance accuracy of the hole diameter, or to prepare a nut that can be centered in the circumferential direction by making the nut ground surface taper and tightening it, or to have a simple dedicated installation tool for high precision installation. or a simple dedicated installation tool would allow for highly accurate installation.
The material is steel, but the surface is coated with a black coloring, so it can change the atmosphere from the OEM-like silver iron.
View detail
Transplant to XG250 TRICKER
Mounting bolts, wiring extension, mounting bracket, etc. were modified and ported to XG250 TRICKER.
The difference in valve resistance made it a high flasher, but the Small blinker made it Stylish.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUBC125
Hidden Dress-up
It's hard to see, but it's good for dress-up somehow. View detail
Required if you want Power over OEM
Installation is easy because it is Couplet-on. Simply select the specified MAP with the specified Spec. View detail
CT125 Auxiliary Lamp
Finally installed the auxiliary Lamp.
CT125CT110 HUNTER CUB Light is dark ...
If possible, it would be nice if there was a standard product that would allow the LEDs inside to be replaced,
If the entire reflector and headlight unit are replaced in accordance with the H4 standard, the cost of the gold is not unreasonable.
So there is Kit from Mukawa and KITACO, which has a proven track record in auxiliary Lamps from various companies,
Decided to go with the less expensive KITACO product.
If you install USB power supply and Auxiliary Light together in Attachment power supply, the voltage capacity will be Over.
Remove the USB power supplyConnector that has been attached.
About, SmallInstalled in about an hourCouplet-on and easy to work with.
Installation is completed in Large form.
All installation is completed when the irradiation test and angle adjustment is done at night.
As for durability, we will see.
View detail
The License Plate is bent, so it is reinforced with a License Plate Holder!
I was looking for an inexpensive License Plate Holder before the License Plate bent into a squishy mess, and I found KITACO's License Plate Holder!
I like it because of its simple design and good texture!
View detail
During MONKEY's Bore up.
I bought it from MONKEY when it was bore up. I chose a reliable manufacturer at a reasonable price. View detail
GEMMA125
Used on an 83 SEA BASSGEMMA 125.
The OEM air cleaner had deteriorated over time and the entrance from the carburetor had become hard to get into, so I had no choice but to replace it, but I was able to do it successfully with air conditioning.
It blew up well and the acceleration was good and the idling was constant, but the intake sound became much louder.
The 50 diameter is quite large for a moped motorcycle, so it interferes a little with the GEMMA125's rear fender, but it is within the range of large enough to be sturdy.
View detail
Fits: HONDA ZOOMERX, HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS-1
NSR50 under construction
I bought this item to build my NSR50. I could have bought a used one from Oak Auction etc., but it would have been rather expensive if I included shipping costs. View detail