Reviews
Fits: Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA PCX125, HONDA PCX125 E:HEV, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CROSSCUB110, HONDA glom, HONDA MONKEY125, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Required for MONKEY125
The OEMHelmet holder for the MONKEY125 is useless, so this is handy!
Essential Items for MONKEY125 riders
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Compatible with TENERE700 Helmet holder
The Helmet holder of the TENERE700 was located near the Chain and was difficult to use, so I purchased it for the purpose of attaching it to the Handlebar.
The Holder that came with the product was replaced and installed where it was originally attached.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Mounted in a location other than the original position
I tried to install it using the master cylinder bracket, but it didn't feel right.
I drilled holes in the Short fender and made my own Base and installed it.
The Holder's Hook can open and close downward, making it very easy to use.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Type B KITACO Side Stand Switch Cancel
There is nothing much to say about this piece for the monkey. This is going to be used for diagnostic and if there is a kickstand sensor malfunction. This product comes with a MFG. Warning *The use of the side stand with the engine running is dangerous and may lead to loss of motorcycle control and an accident. *Do not start the engine with the side stand in the upright position.There is a risk that the vehicle may jump out or fall over. *When starting off, ensure that the side stand is down before riding. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Helmet holder relocation of TENERE700
Helmet holder of TENERE700 is on Left SideTandem Footpeg, so contact with dirt around Chain line and Rear is a concern
So, the relocation to Handlebar, which has become a standard in SEROW, etc., is carried out.
Satisfied with the ease of use and no longer have to worry about stains.
I will divert the OEM lock, so if you can sell only the Bracket and Bolt without Lock at a lower price, that's all I need to say.
View detail
Fits: HONDA PCX150, HONDA ADV150, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125
Works rather well for SmallEngine Displacement Volume machines.
I changed the handlebar to this Throttle pipe, which has a slightly higher Solo.
I had a very good feeling when I replaced PipeHigh Solo with Gold PipeHigh Solo for KLX125C in the past.
The work itself is easy by removing the Right arm Switch box, loosening the Handlebar Post, and pulling the Handlebar to the Left.
Thailandco and Wire are checked, cleaned and greased if necessary.
When you use it, it's still really easy to handle!
Of course, the output does not change, but throttle work becomes easier, if only a little.
If that little bit is also constant, the benefits are immeasurable.
And at a low Cost!
Although it is completely indistinguishable from the outside, it is far more useful than a fashion item that only looks good.
We are confident in recommending it to those who want to focus on cost-effectiveness!
View detail
Super Throttle Pipe from Kitaco
* About quality and texture, The throttle tube is made from a black plastic just like the Honda OEM one but with a different deign. * About the feeling of use, Definitaly a worthwhile product to install as I initally found the difference between the two quite noticable but over time it is now the new norm. Due to less rotation of the throttle required the power comes on faster and that is never a bad thing for a 125cc motorcycle. * Products to buy together, I would recommend also purchasing some new hand grips as the Honda OEM ones will be difficult to remove, Kijima have a great range here on Webike. * Difficulty of installation, Installation requires the tension to be released from the throttle cables, throttle housing opened up and bar end removed before you can remove and replace the throttle tube. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, There are a total of three brands offering throttle tubes but only the one from Kitaco offers the higher throttle rate and is the cheapest of all to purchase. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, I cannot see a reason why you would not add this product to your Grom. Use the product reviews to assist in making a decision on your purchase. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
I think this is the best helmet holder.
Easy to install
It is easy to attach and detach the Helmet from the Holder without having to bend down.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Installation was easy.
Installation was quick and easy; you will need to remember the original position if you want the Bolt to be secured in its original position before loosening it.
I always use this one, because the Left Side Helmet Holder is lower than the Standard Equipment one. I think it is a very good product.
View detail
Fits: HONDA PCX150, HONDA ADV150, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125
Cospa!
Used in CT125.
I replaced it to reduce the burden on my Right wrist when touring.
It's great because it makes city driving easier and the price of the product is low.
However, it seems a little long for CT125, so I cut it with a little nipper.
View detail
It gives a sense of gravity.
I didn't want the Smart key to be scratched if it was left naked, so I bought the one from KITACO, which is now being sold by FOR JAPAN MODEL.
I was able to install it without difficulty, and I am satisfied that I made the right choice in selecting Gun meta, as the anodized peeling was not noticeable.
As I put in the picture, it is a bit of a hassle when replacing the battery.
View detail
Fits: HONDA PCX125, HONDA PCX125, HONDA Sh mode, HONDA PCX125, HONDA PCX125, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA LEAD125, HONDA LEAD125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, Others KITACO Power driveKIT 489-0420000 (for MAJESTYS)
It purchased to the addresses V125. Although the thing by an advanced pro was used before, he rebought the weight roller of the kitaco taking advantage of setting having come out. Isn't it that which is said since it thinks that a price is also th
It purchased to the addresses V125.
Although the thing by an advanced pro was used before, he rebought the weight roller of the kitaco taking advantage of setting having come out.
Isn't it that which is said since it thinks that a price is also the cheapest? Since it can use by 2 times by setting of 14g+16g for entering six piece, it is large satisfaction.
It is not likely to be necessary to purchase the roller now for about one year (smile).
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Helmet holder
I wanted to put the Helmet holder under the Seat, but I think the Helmet holder next to the Handlebar is also convenient and easy to use. View detail
Fits: KAWASAKI Z125 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125, HONDA APE 100, HONDA APE 50, HONDA APE 50 TypeD, HONDA APE 100 TypeD, HONDA glom, HONDA MONKEY125, HONDA GB350S, YAMAHA BWS 50, HONDA Universal for Φ22.2 Handle, HONDA PCX125 E:HEV, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA GB350
Handlebar Brace
It looks nice and is a good way to attach a Smartphone Holder. View detail
Fits: HONDA PCX150, HONDA ADV150, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125
Replaced in conjunction with Grip replacement for CT110 HUNTER CUB
This product was installed in conjunction with the replacement of grips on a CT110 HUNTER CUB.
The OEM Throttle holder has a protruding
If you are replacing the Grip with a Universal Product Grip, you can replace it with a Throttle holder like this one.
Can be installed without modification.
View detail
Fits: SUZUKI ST250, YAMAHA MAJESTY SV, YAMAHA TW200, YAMAHA TW225, HONDA FORZA ST, HONDA FORZA T, HONDA FORZA S, HONDA FORZA X, HONDA PCX150, HONDA PCX160, HONDA ADV150, HONDA PCX125 Hybrid, HONDA CB250R, HONDA CB250F, HONDA CB223S, HONDA CBR250R, HONDA FTR223, HONDA CBR125R, HONDA CB125R, KAWASAKI Z125 PRO
Aluminum Cut-outs and colors are great on Parenthesis!
This product is Aluminum Cut-out and the color and design is Parenthesis, it's easy to replace and it's made by trusted KITACO, so the Status is high! View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CBR125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA Z125 Pro, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125 Hybrid, HONDA glom, HONDA ZOOMERX, YAMAHA BWS125, YAMAHA BWS 50, YAMAHA MAJESTYS, Others , HONDA CB150R, HONDA CB300R
Ideal for moving OEM helmet holder position
The SEROW helmet holder is located near the rear tire, so I hesitate to hang my helmet on the handlebar when I ride after it rains because it is dirty with mud. I can use it with the key of the motorcycle. View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Easy Attachment power supply.
PCX125 (JF28) I purchased this product to install a USB power supply to the
I had a hard time removing the Windshield, but it took only 30 seconds to install this product into the Service power supply, just plug it in.
You can choose between a constant power supply and an attachment power supply, depending on your needs, so it is a good idea to separate them according to what you want to add.
Since it is a product used only for extracting power, there is nothing more to mention, but it is made by a large-handled manufacturer, so there are no problems with its manufacturing.
Incidentally, since the terminal shape is Bullet Type Terminal, it may be necessary to modify the wiring of the device to which it is to be attached.
In this case, you will need to prepare Male of Electric Works Pliers and Bullet Type Terminal, which you can buy in advance.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA Dio system, SUZUKI high-R, YAMAHA jog, HONDA DIO110, YAMAHA Remote controller jog, SUZUKI CARNA, SUZUKI Shot, SUZUKI High, HONDA LEAD110
Suitable for maintenance of the drive system on the Driven side.
This product is used for maintenance on the driven side of Scooters and other vehicles. It is a sturdy, accurate, and trustworthy product used in motorcycle shops! View detail
Fits: HONDA PCX150, HONDA ADV150, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125
Easy High Solo conversion
This is High Solo by KITACO, a long-established 4MINI company.
Acceleration is possible with little twisting.
It is suitable for keeping cruising speed when touring, etc., rather than revving at high rpm.
good point
The only thing that needs to be done is to change the throttle holder to High Solo.
The range of the Accelerator operation has been expanded, making it easier to maintain speed.
Cheap.
Mounting accuracy is not bad.
A bad point
● No.
SmallEngine Displacement VolumeMotorcycles like CUBs tend to have a small Axel range, so the Accelerator operation tends to be busy.
I would like to RECOMMENDATION to those who want a little more room.
View detail