Reviews
Very easy to use!
Used for Oil replacement!
The scale is accurate and it has a lid!
I guess you have to buy from a proper manufacturer.
It was the right decision to go with KITACO!
View detail
Not Just an Oil Jug!
【Impressions】
I am satisfied with this product because it is not just a product to put oil in and pour it, but a detailed device that makes it easy to change oil for motor cycles.
[Good point.
Scale in 100 ml increments
Many products do not have a scale or are measured in 500 ml increments, but the Large body is measured in 100 ml increments.
●Cap included
A cap is attached to the nozzle tip and to the oil supply port to the body.
Prevents dripping during storage and foreign matter from entering the body.
Mesh is attached to the root of the nozzle.
It has a rough mesh. Even if insects or parts fall on the body, they can be caught.
[What's on your mind]
Nozle is not self-supporting when attached in the empty state.
Be careful when filling the jug with Oil because the jug may topple over on windy days.
When putting Oil in the jug, it is safer to remove Nozzles.
No place to put the Nozzles when they are removed.
I would like to be able to keep the removed Nozzle attached to the Body. This is my hope.
★I introduce the maintenance method of SUPER CUBPRO in my blog.
https://cub-noru.com
View detail
Ideal for moped Oil replacement
This is my first attempt at changing oil. I have been asking the shop to change the oil in my other ZX-10R, but I tried to change the oil in the ZOOMER by myself. To sum it up, it is very easy.
Various Oil Jugs are available from other manufacturers, but I think Motorcycle Products Manufacturer is the easiest to use for Motorcycle use. The deciding factor in purchasing this product was that it comes with a lid and the memory is engraved in 100cc increments.
The Oil Exchange is an opportunity for me to try other maintenance by myself.
View detail
It is good to have many Type of capacity
I bought the 1L one, but since I bought the Large type, I needed more Oil at once, so I bought the 2L one.
It is as easy to use as the 1L.
View detail
Oil Jug with Lid
[How is it used?
I bought this to replace my old Oil Jug which was too hard to use.
Was the one you received as per Image?
The product was exactly as shown in the picture and there were no problems.
How was your experience with it?
There is also a lid on the Nozzle, so even after you've finished using it, you can store it without dripping oil, so it doesn't stain the surrounding area and can be used in a clean way, which is very helpful.
The scale can measure up to 1 liter.
[Points to note]
The black lid at the top is very easy to remove, so be careful.
Even if you close the black lid, you can't prevent it from overflowing by slanting it.
How did it compare to other products?
The Nozzle tip lid is still reassuring.
I think it's a big difference between having this and not having this.
It's very helpful because it's so messy to think about all the drips and spills.
View detail
100ml increments are good
I used it to replace the OIL on my MONKEY125.
MONKEY is 900ml, so this product is easy to use because the scale is in 100ml increments.
What I'm interested in.
Nozzle is too long.
The netting on the nozzle slows down the flow of oil.
It's about the same.
It's also nice because the price isn't that high.
View detail
Maintenance essentials
The Oil Jug that I used to use, I think it was purchased at Home Center's Car Parts Corner I bought it because I ran out of Bellows in the Nozzle section. In OthersMaintenance, it is very useful. When storing, you can put Dustclothetc. in it to keep Dust and Garbage out of it. I think it's good. View detail
I thought it was good in Oil Jug.
I've used several Oil Jugs and I think this one is the nicest to use and store. It's also good that it has a little bit of a brown strainer inside.
If it's a cheap one, Oil leaks from the slot of Nozzle, but this jug has no leaks or It can be used without.
It also comes with a lid and a Nozzle Cap, so you don't have to worry about Garbage getting into it when you store it. There is no need to worry about it.
View detail
It is attentive product
I bought it to Oilfor Replacement of Small Type Motorcycle.
I used it until now because Memory was 200 mml increments so I was looking for 100 mml increments and purchased this item.
Exchange Oil 1. Because it is 1L, 100mml increments are very easy to use.
Nozzle is longer than ever, but because it is higher than 1 L Memory, I pour it with confidence.
A lid is attached to the pouring spout and the large mouth but I'm happy to prevent dust at the time of storage.
Nozzle It is easy to fall over in the long and empty state, so be careful.
View detail
Easy to use in 100 ml unit display, easy cleaning up!
I purchased 1LiterSize.
The reason I bought the most is because memory is waving in 100 ml increments, it's easy to use for SmallEngine Displacement Volume cars.
Filteretc at the base of Nozzle so that Garbage does not enter as an attentive function. Although it is equipped, whether it is honest or not, it seems to be somewhat concerned.
It is time to finish work and finish what I felt rather surprisingly better than ease.
- Cap comes in front of Nozzle and it can be attached when you finish using it.
- Cap is attached to the jack's large mouth, and here it can also lid.
With this, Dustclothetc. It is not necessary to substitute lid so that Garbage does not enter at the next use.
Also, do not have to be careful about placing jugs so that Oil does not get around when storing and storing.
It is a bit of a problem, but after finishing work, it is unexpectedly troublesome to clean the jug by making the container used cleaner to some extent.
Although it is refined to people, I do not do surprisingly to prepare a lid separately.
If the lid is attached like this item, there is no worry that Garbage is in use next time, hands will not get dirty, it will be taken care of Smooth without concern for placing place (Lol)
View detail
the goods of another Manufacturer which changed -- -- the jug of the simple form here says me -- it is . It does not feel like the ability to plan capacity just somehow as it is ... If it is 2L, it is good for a Motorcycle exactly. Although
the goods of another Manufacturer which changed --
-- the jug of the simple form here says me -- it is .
It does not feel like the ability to plan capacity just somehow as it is
... If it is
2L, it is good for a Motorcycle exactly.
Although it was a thing as which 1L may be sufficient, since it was
trouble, he bought the 2L.
The oil can be easily changed by the
funnel and a Set.
View detail
It purchases in order to carry out an oil change by itself. ease of use puts. I think that it is one article which has and does not have loss.
It purchases in order to carry out an oil change by itself.
ease of use puts.
I think that it is one article which has and does not have loss.
View detail
Since the scale is turned off thinness with the lid, it is easy to adjust an oil amount and easy-to-use. There are oil's accumulating there and only a few's remaining, since a level difference's is made at the joint part of a jug and a nozzle, and a t
Since the scale is turned off thinness with the lid, it is easy to adjust an oil amount and easy-to-use.
There are oil's accumulating there and only a few's remaining, since a level difference's is made at the joint part of a jug and a nozzle, and a thing on which he does not get hooked the cap at a tip by individual specificity.
When processing both, it was an ending talk, but it was thought that it was slightly poor structure.
View detail
It is found useful very much at the time of an oil change. Since the portion of the lid is covered a little, there is also no fear of falling from a top. Since it puts in too much since an exact quantity can be measured by memory, and there are al
It is found useful very much at the time of an oil change.
Since the portion of the lid is covered a little, there is also no fear of falling from a top.
Since it puts in too much since an exact quantity can be measured by memory, and there are also no worries, it is a recommend!!
View detail
Although it was trusted halfway and purchased because a manufacturer calls it a kitaco, it was good too! Strong and there being an injection hole which puts oil into a pot and, and the hole discharged to a motorcycle have the cap first, respectively.
Although it was trusted halfway and purchased because a manufacturer calls it a kitaco, it was good too! Strong and there being an injection hole which puts oil into a pot and, and the hole discharged to a motorcycle have the cap first, respectively.
Therefore, even if it puts in and pushes down oil on a pot, oil does not fall, and since the lid is attached, naturally it does not have mixing of a foreign substance, either.
Although it is concern, if not finer-tooth, I will feel that it is meaningless for the filter being attached.
View detail