Reviews
Fuel Hose Clip
Clip was replaced along with the replacement of the fuel hose on NSR50.
It works fine
View detail
Use it as a bean.
[How is it used?
Purchased for Spoke maintenance.
Was the one you received as per Image?
It is a small size as shown in the picture.
How was your experience with it?
It can be used in a variety of sizes and is small, so it doesn't take up too much space in the tool box, which is great!
[Points to note]
Not particularly.
How did it compare to other products?
Thank God, because everything else is so expensive!
View detail
Enough to remove Spring
It is easy to apply force and of sufficient quality to work with.
The tip is strong and does not bend, so it can be used for a long time.
I think it's a good product
View detail
I can grab it for sure.
Vino (5AU SA10J) Maintenance was used for maintenance of the
Rear suspension of Other Brand Products (5-step adjustment) is installed.
The accompanying Pin spanner system is poorly initialized.
I bought it because it was difficult to turn the adjustment Dial.
The shape of Hook's nail is very well and reliably gripped.
It was easy to adjust without coming off or slipping.
The soft rubber rolls on the handles are also good.
Stem Nut adjustment is also done by Self.
It will be useful for adjustment.
View detail
Kitaco Combination T-Type Wrench
Perfect size t handle, not too long, not too short either. Can fit 3/8 and 1/4 drive socket on the end handle. Can also accomodate hex bit by simply sliding the end part. Grip feels cheap. Definitely a good add to anyone's tool collection. Only thing i didn't like about it is the color. View detail
Compact and easy to use.
I only had the tool without the Magnet, so it was very useful. View detail
Satisfied
I don't have to tell you, the Magnet system is easy to use.
I also appreciate the fact that it can be used both in Hex Socket and Wrench. It's easy to use in both large and small spaces.
It is heavier for an in-vehicle tool, but it is compact, so no problem.
Used in combination with Glasses ratchet for cramped work on Scooters, etc. The magnet makes for smooth work without falling off.
View detail
Convenient with a lid
I used to store my Oil Jug in a bag because Garbage would get in it when I stored it, but this one has a lid, so it's less work and more convenient.
It was easy to understand the amount because it came with a memory.
View detail
Magnetic Pick Up Tool
About quality and texture - Excellent quality hand tool, good sized plastic handle that fits well in the hand. About the feeling of use - Nice flexible shaft and strong magnet for picking up screws and washers Products to buy together - I purchased this together with the magnetic dish from Kitaco, product # 674-0900011. Difficulty of installation - Easier than easy to use, adjust the shaft to your desired angle and go searching for that missing screw. Cost performance and comparison with other products - By far the best priced flexible pick up tool on Webike, the other may be slightly better but not worth it for five times the price. About shipping and packaging - Arrived safely and well package via EMS shipping option at a great price. Any concerns, cautions, or advice when purchasing - There is a review saying the magnet on the tip came off so if you are looking for the best flexible pick up tool out there this may not be for you but mine hs been fine so far. View detail
Essential for Engine overhaul
It is used for Engine overhaul of NSF100.
I use it rather frequently because it's for Race, but there is no particular durability problem. It is possible to use it safely because it does not rust.
View detail
Not impossible to do without, but useful to have
for RaceEngine is used for disassembly.
It is possible to remove it by hooking a slotted screwdriver etc. without this, but I bought it because there is a possibility of damaging parts.
For Race is especially useful because I want to maintain it severe.
Comfortable to use, durability is fine.
View detail
Not when it's hard...
It is difficult but useful when the Plug is sticking. View detail
It is good to have many Type of capacity
I bought the 1L one, but since I bought the Large type, I needed more Oil at once, so I bought the 2L one.
It is as easy to use as the 1L.
View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 50 (AA04)
Flywheel Puller
About quality and texture - Excellent quality, the surface finish of this tool is very durable and still looks new after a few uses. About the feeling of use - Threads nice and smoothly onto the flywheel and applies the required force on the crank for a successful removal with no damage. Products to buy together - A pulley holder is advisable to use together with this part and if you like to keep your tools all the same brand Kitaco have one for the job, product # 674-0500900. Difficulty of installation - Easy install of this tool, simple thread it on and wind in the pin. It is that easy. Cost performance and comparison with other products - Best value flywheel puller for the Monkey 125 on Webike at the time of purchase and I prefer the Kitaco tooling as long as the pricing is not high but the other brands here are not that much more expensive if the Kitaco is out of stock. About shipping and packaging - Arrived on time and everything was packaged safely. I used sea frieght as I was not in a rush to use the tool and it saved my some money to put toward more motorcycle parts. Any concerns, cautions, or advice when purchasing - Keep in mind the flywheel pullers are available in different sized and pitched threads so confirm the tools is correct for your motorcycle before ordering. View detail
Gear Holder
About quality and texture - Excellent quality, perfect fit and the rubber handle is a nice finishing touch. About the feeling of use - It handles the high torque loads placed on it with easy. Products to buy together - Good idea to also purchase the Kitaco center lock nut wrench product # 674-1432900. Difficulty of installation - Easier than easy. Cost performance and comparison with other products - Normally for a good price but if you can catch it on a big Webike special it is great at under $20 AUD and no other brands can compete with that. About shipping and packaging - Shipping was slow but as expected since, it was part of a larger order and I went with the cheaper by sea freight option. Any concerns, cautions, or advice when purchasing - If you do a lot of work on the engine yourself, do not use a coin like some people do as it is only a matter of time before it falls into the engine. Just buy the right tool. View detail
Improved workability for oil replacement
When I changed the oil, I used to put in the oil with a conventional roto, but the diameter didn't match and it leaked.
The Nozzle tip diameter of this product is Exactly the same as the Motorcycle side inlet, and I felt that it is indeed a Motorcycle product.
Also, the tip of Nozzle has a screw, and it can be sealed with the attached cap, so it doesn't stain the surroundings with the oil left in Nozzle when it is stored.
I wanted a scale in 100ml increments, so I went with 1L. The durability is yet to be seen, but if it lasts to some extent, I would like to Repeat.
View detail
be extremely thorough, focusing on the details
When doing maintenance and custom work, I sometimes drop my Nut and Washer, and with a motorcycle, there are a lot of tight spaces that I can't get into and it's frustrating.
I was confused with AntennasType, but I chose this one because I was worried that the magnet would react unexpectedly and be difficult to use in a motorcycle with many iron materials.
If you can fit it well, you can make it about half the length and it can be stored easily.
It is flexible, but it holds its shape to a certain extent, and I think that it can cope with narrow gaps because the tip is thin.
The best thing is not to drop it, but it gives you peace of mind if you do.
View detail
Oil Jug with Lid
[How is it used?
I bought this to replace my old Oil Jug which was too hard to use.
Was the one you received as per Image?
The product was exactly as shown in the picture and there were no problems.
How was your experience with it?
There is also a lid on the Nozzle, so even after you've finished using it, you can store it without dripping oil, so it doesn't stain the surrounding area and can be used in a clean way, which is very helpful.
The scale can measure up to 1 liter.
[Points to note]
The black lid at the top is very easy to remove, so be careful.
Even if you close the black lid, you can't prevent it from overflowing by slanting it.
How did it compare to other products?
The Nozzle tip lid is still reassuring.
I think it's a big difference between having this and not having this.
It's very helpful because it's so messy to think about all the drips and spills.
View detail
for Replacement
I bought this one to try for Hose clampfor Replacement.
Stainless SteelMaterial is good, but hang to remove, hard to do if you are not used to it? It seems to be.
It would be easier if the Clip end was a little larger.
The quantity is also half, Quantity:It would be helpful if it was cheaper at about 5pcs.
View detail
Kitaco gear holder
I order this gear holder to remove the spinner in my Honda Monkey, the tool is a quality made product and the correct tool to use. I'm glad I bought it. Webikes shipped fast View detail