Reviews
The usual.
This is the Lock wire I use all the time.
I bought it because it was out of stock.
I have Sizes before and after this one, but the 0.57mm is the most versatile.
View detail
Wiring.
I bought it to do Wiring.
It is safe to say that it is for Motorcycle.
I wanted to use it just a little bit, so I was glad to find a shorter length for sale.
View detail
First aid for Cowl cracks
[How is it used?
I used it in Repair of a Chinese Cowl that had cracked some time ago.
We chose KITACO's Stainless Steel Wire because we also planned to utilize it for Wiringetc.
How was your experience with it?
We drilled a hole around the cracked area and threaded it through to fix it so that it would not flap for the time being.
I think it would be a little more exact if I applied a guess board, etc., but it was too much trouble, so I covered the top with tape to cover it up.
If you want to fix it properly, Plastic repairetc. There are many ways to do it, but it was enough to fix it for now in a short time.
How did it compare to other products?
I thought that the appropriate needle Gold would be fine, but I decided to use this product because it can be used in a variety of ways.
It has a fairly large capacity, so I don't think you will run out unless you are on Raceetc.
[Points to note]
Not particularly
【Review】
Large capacity and reasonable price.
It can be used for various purposes such as fixing Wiring and Grip.
View detail
I chose it for its capacity.
Large capacity and Reasonable. I wonder if I can use it in my lifetime…. View detail
Also dedicated to Motorcycle
Initially, I sought cheap ones from Homesense, but I have heard that they are easy to break.
I was able to attach the grips without worry, as they showed no signs of breaking even though I twisted them a little too hard during practice.
This was my first time Wiring and I am satisfied with the finished product.
When I purchased it, I thought it might not be enough, but this amount seems to be able to do quite a few times.
View detail
Easy to use
There are surprisingly times when it is necessary and Stock.
Convenient
View detail
To Grip's Wiring
I use it for the grip wiring of my yz125. It's made of stainless steel, so you don't have to worry about it rusting.
I recommend it because the price is cheap and the quantity is just right. I think it is also easy to use for other Wiring of Boltetc.
View detail
Cost performance good
I had trouble with the other size thingy. Large also means Small That's why I bought the 0.8mm.
I am using it for wire lock. If it is thinner than this, I worry about the strength, but if it is 0.8mm, I feel secure.
It is also a universal product that can be used for many things, not just wire locks.
View detail
That would be handy
Shoddy Wire will run out quickly though.
This can be used normally.
This is a must-have item for your toolbox as it can be used for repairing cars and houses as well as motorcycles.
You can also keep some length in your on-board tools to help you in case of a fall Repair.
It is not easy to reduce, but I will buy the next one.
View detail
Essential Items for Race Activities
Wiring is a must-have item for race regulations, and although there is a small amount of wire in the package, I think it's better to buy the bottom type if you are still racing. I think these are frequently used items. View detail
Easy to use
It's a standard thickness lock wire and very easy to use. The best part is that it comes in this Case. I've had it for more than 20 years and it hasn't gone away. I think it's going to last a lifetime in my personal youth, so it's a Recommendation that you should have a few wire locks in your street. View detail
Wiring.
Wiring is required for the cars competing in the race:KITACO's Stainless Steel Lock Wire is available in several different thicknesses, so you can choose the one that best suits your needs.
This thickness is a good salt, not too hard and not too soft. The thickness is just right and I think it can be used anywhere.
However, be careful when twisting with Twister because it is easier than you think.
View detail
You don't use it up as much as you think
It's used for the Grip, Drain bolt, and Oil Filler Cap when wai-ring to I am
It is easier to pass the wire through the hole and use it with Grip than the normal one If you do
I like to use it because it doesn't hit my hands
The wire is thin, so it is natural, but if the wire is twisted, it will be cut off, and the wire will be broken It's easy
View detail
Will it last a lifetime …
This is the so-called Gold Needle for Wiring
The thickness is 0.57mm, not too hard, but not too easy to break
Wire twister and Quantity:Buy in a set
There's a lot of it in there, so even if you're a Race player, unless you're too bad at it to waste it, it's going to last pretty well I think
I don't know if I can use it up in my lifetime lol
View detail
usually
I bought it for the Grip's wire lock, you don't need it in a large amount and you can use it a few times With both Grip and Grip, I think there's a lot of room for 4 times or so The fineness was just right View detail
It just needs a little work on storage!
0.57mm is a good thickness. If it's too thin, it will cut off in the middle of Twist, and if it's too thick, it's hard to handle it in a small place. If you are worried about it, 0.57mm is the right choice.
As for the storage method, if you poke a hole in the lid to let the wire out moderately and fix it with masking tape, you won't have to worry about it getting tangled!
View detail
A lifetime
Wiring to all places, 0. Just a good thickness with 57 mm. If it is thin, it can cut in the middle of Twist and handling is hard when it is thick if it is thick. If you worry 0. It is correct answer choosing 57 mm. View detail
Hard to cut
Off I fix the car's Grip to Wire. Adhesion is Large change with Grip exchange so it is Wire fixed every time.
I was constantly threading when I was twisting with Homsen's Stainless Steel WireWire, but this item is durable. Stainless Steel But it might be hard to cut because it's quite soft for cohesion.
Again it is something you can think that the exclusive items are different.
View detail
Grip
Purchased for Wiring with Grip exchange. The price is higher than Wire sold at home center etc, but it feels like it is hard to cut when twisting. I do not use so much so I use this thing with reliability. View detail
Classic of Wiring
Buy with Wa BigGarage Wire twister.
Speaking of Wiring's Wire, this product is a classic, but the quantity and strength are perfect.
If it is not RaceUser, I think that it is an amount that can not be used at all.
View detail