Reviews
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 909-1083001
There was a need to replace the cables on my Honda Monkey. The original cables had damage to the outer jacket. To my delight, KITACO had these items in its product range. And KITACO was not let down, the quality of the cable turned out to be on top. There were no problems with the installation. View detail
It's true, Clutch is light.
The OEM handlebar had been replaced, so the OEM length was quite excessive, and the clutch felt too heavy, so I replaced it. It really lightens the weight, and I wish I had replaced it earlier, it would have made long touring easier, but no regrets. View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
สายครัชเดิม งานดีครับสวย monkey z50 View detail
Is it a recommendation for those who value appearance?
Used for MBX50F.
I purchased and replaced it just for looks.
Bought it for the looks, too bad you can't see much of it in the shadow of the Tank, I knew that, but...
Depending on the installation, can it be made to stand out? (I don't like to see Wire outside, so I keep it quiet...)
The movement of the wire itself is not so different from that of the OEM, but if the wire has deteriorated too much or if the rust on the wire is noticeable, we recommend replacing the wire, but we are not sure if it is that good.
View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
From Red to Black
When the clutch cable I had previously used broke, I replaced it with a cable I had on hand, but I could only find a red-colored cable.
I replaced it anyway, but the Red color Cable is still the same. "Everything" The first time I saw it, I didn't like it because it had a
We decided that black is the best color for cables, so we replaced the cable with this one.
View detail
Products for peace of mind
It is safe to use
In my environment of use, I do not feel any special deterioration even after several years of use, but I am replacing it just in case.
View detail
It's absolutely RECOMMENDATION over NORMAL!
[How is it used?
The normal cable is getting old and is not working well, so we decided to upgrade the cable as a replacement.
Was the one you received as per Image?
Parenthesis is good because you can see that it has been replaced by the color as shown in the Image!
Was the installation difficult?
It is only an exchange with the NORMALClutch cable, but for the first time, you may be confused at the spring part on the clutch receiver side.
How was your experience with it?
The Normal cable was old and no good, but this one with Stainless Steel Wire is lighter and seems to be more durable.
[Included Parts:were they on?
Quantity:Since it is a Set, RubberBoots, etc. are installed.
[Was there anything that disappointed you?
Not at all. I am satisfied.
▼ The construction is pretty solid, and I think it's a better product than the NORMAL!
View detail
Used for ModernWorkScratch
I bought it for the same secondary Clutch, ModernWorks for Clutch.
In the end, we could not use it as it was, but cut 2 cm of Outer and used it.
View detail
I was able to install it on my CL50.
It is for CD50 but installed on CL50.
Normal wire rusted and stuck. 。
OEM Parts discontinued.
There were no problems with installation, and the stainless steel wire makes the movement lighter.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA
Shift comfortably with FrictionFree!
Large satisfied with the very good finish and feel of operation. View detail
Satisfied with Cospa
I bought it for KSR2 Maintenance and it's a 20 year old Motorcycle! I was looking for a new Clutch Cable soon, and I found it! And if you read the impressions of trusted brand name purchasers, this is the one to buy After the replacement, the Clutch is lighter and more fun to ride View detail
Cost performance ◎
As I received it yesterday, today I installed it immediately.
Installation is very simple as it is MONKEY
, If there is ten minutes of things, can we make adjustments?
Removing the cable before replacement, the movement of Wire is very reluctant,
After the exchange, it became the lightness of surprise.
Even though I left the Clutch lever, there was a feeling that I felt a bit like touchingly,
After exchanging it will return with lightness like you added in Spring.
Thanks to that, Clutch with a slippery feeling can expect a little improvement.
This time, because there was something I wanted to buy elsewhere, I made it cheap Red,
Since quality seems to have no problem at all, Custom feeling comes out in color,
I think that it was good..
View detail
Movement also to Smooth
I exchanged Clutch Cable that I went through. Installation is absolutely no problem. Although RedCable stands out, w feel good if wearing a Custom feeling is good as well w is good, I am satisfied with Large. View detail
This cable cluth is so very nice and very good packing have bubble shock recieve between shipping. When is use it so smooth and so beautifully.
This cable cluth is so very nice and very good packing have bubble shock recieve between shipping. When is use it so smooth and so beautifully. View detail
It is a solid Cable
I thought whether the Outer tube is a little hard, but I think the crucial Cable slip is very good and it got lighter until Lever. Naturally there is no difficulty in installation, the Red Outer creates a Race ish atmosphere. Red's Tube on the body of Green may be a little conspicuous (Lol)
View detail
Oil Elimination of leak
Oil bleeds out from the attachment part of the exhaust pipe for vehicles purchased in second hand and purchased thought that it can be solved by exchanging for this part. Because I could not remove the exhaust pipe with my own tool, I asked for installation at a Motorcycle repair shop. I am satisfied with the results as expected.
View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
I think it's good.
Because I was forced to Lever of KITACO, I attached an OEM Cable
This time, comfortably and securely by exchanging with this Cable, from the beginning
I feel like without feeling ...
View detail
The operation is very light.
I got a replacement because Clutch's return of the transferred vehicle is bad.
I decided to Stainless mesh, but I decided on this product because it was the cheapest among the Coated by Wire.
Clutch operation got dramatically lighter. (Although the movement of OEM Product before exchange may have been too bad - - - )
It was a correct answer by choosing what is Coating in Wire.
I like Stainless mesh and I like it.
View detail
Fits: HONDA APE 100, HONDA APE 50, HONDA LLever&Holder made by KITACO
With CB 50 SUPA Handlebarization
Changed from OEMHandlebar to Up Handlebar so Clutch Cable has changed to long one.
We purchased it by measuring the necessary Length beforehand so it fitted in Length without excess or deficiency.
Clutch CableBoots is also included in this item so I think that it is convenient to run off.
View detail
It is in play which is used for KSR-2 for two years.although used for commuting etc., it is Crack-divided and an open circuit of a Wire and an Outer fade -- etc. -- there is nothing and it is still maintaining the state of about 90 percent at the time
It is in play which is used for KSR-2 for two years.although used for
commuting etc., it is Crack-divided and an open circuit of a Wire and an Outer fade -- etc. -- there is nothing and it is still maintaining the state of about 90 percent at the time of a new article.
5-56 is put briskly and a motion of a Wire is also smooth.Since it becomes an Accent with the degree preeminent for durability and sufficient also as appearance, we recommend you here positively rather than a pure Wire!
View detail